JVC GR-AXM710 Camcorder - Page 4 - Answered Questions & Fixed issues

See pages 40-41 of the manual

Short answer - no Long answer - no you cannot. Transfer the files to your computer.

Disconnect the battery pack or the DC power plug on the back of the camcorder if the LCD screen displays error code "01," "02" or "06." This resets the camcorder and unlocks the unit from safe mode. Wait 10 minutes before reconnecting power.

My JVC Camcorder Is Stuck in Safe Mode - eHow UK

How to Get a JVC Camcorder out of Safeguard Mode

https://itstillworks.com > jvc-camcorder-out-safeguard-... These cameras contain sensors that can detect issues in their operation. When they detect an issue, they can put the camera into a special "Safeguard Mode" that ...

For what model?

The USB is for data only. Just buy anew mains adapter https://www.google.com/search?q=ap-v18u%2F14u+ac+adapter https://www.walmart.com/ip/iTEKIRO-AC-Adapter-JVC-AP-V14-AP-V14A-AP-V14E-AP-V14KR-AP-V14U-AP-V14UA-AP-V15-AP-V15E-AP-V15U-AP-V16-AP-V16U-AP-V18-AP-V18U-AP-V20-AP-V20U-AP-V21-AP/164915059 ..

Just order a new one

GZ-MG21U - JVC USA

http://resources.jvc.com > Resources PDF Nov. 10, 2006 - GZ-MG21U ... use, please read the safety information and precautions ... The camera has a built-in high-capacity HDD (hard disk drive) that ... 72 pages The adapter is availabe on Amazon, eBay or even from Walmart! https://www.google.com/search?q=ap-v18u%2F14u+ac+adapter ..

You can exit production mode by pressing the menu and reset button. Simply press and hold the MENU button first then press and hold the small reset button. Keep both buttons down until the radio powers off and back on. Do not let go of the buttons until the radio comes back on and off production mode. You may also press the MENU and reset buttons repeatedly.

E-06 is a mechanism error. Possibly the deck is in the wrong position. Return it to an Authorised JVC Repair Centre for service.

IF YOU HAVE NOT REPLACED THE BATTERY LIKE IT TELLS YOU TO, WE CAN NOT OFFER ANY HELP

And then what ? If you state the problem clearly in English, we may be able to help you.

Maybe it's have not. Just take off battery .

batteries no good possibly

if it is not in the main menu then you can not do it .period

find out a video grabber unit to connect with computer. it costs about 35$.

the camera may fell, so that the lens my be shaken, if so must open and take out the camera section and re assembling will cure this pbm.

it has small lock, with a needle can remove this f not understand I will send picture. mail: [email protected] search you tube: "camdoctor"

No. All electronic equipment requires power for any operation. Try replacing or re-charging the battery.

https://www.us.jvc.com/archive/videocameras/everiocamcorders/gz_mg130/ ++

Read the manual. This will give you all the information you require. There is no simple answer to your query, as various chargers indicate their state in different ways - some flash while charging successfully, while with others it is an indication of a fault or an error.

Leave it open with no tape, then put it in the airing cupboard overnight to warm gently and let the condensation evaporate