Top 20
Cyber Acoustics CA-3550 Computer Speakers Questions & Answers
Distorted sound on the CA-3550
It could be that, or it could be that you have the wrong audio settings. Such as the quality of playback being set too low or a sound setting which is not for music.
My CA-3554 speakers do not turn on
It might be a relay or something that gives clickany way ur speaker power supply need to be checkedAc to dc converter or transformer r typical cases
No output on one channel,
Hello, test your speakers by connecting them to either a radio or a mp3 player/ipod. If you get output from both channels, then it's a computer problem, which might be your Windows 'volume control' settings (in advanced mode you can see the balance control). Alternately, you could plug in a headphone to the pc and hear if you have output to both channels coming from the pc.
If when you test your speakers on a radio or mp3 player you STILL DON'T get an output on the one channel then you need to concentrate your troubleshooting to the speaker system.
Hope this helps...and don't forget to vote!
Regards,
nicam49
My CA-3550 speakers no longer produce sound - but
I had the same ones their junk... They don't hace magnetic protection and it says not to put them next to moinitors and other magnetic equpment. The only reason the head phones work is because the cables that send audio signals are still working, It is because the mini sound amps within the speakers have some how distroyed them selves. Its not great and theirs not much you can do acept take it appart and look for either: ( broken/or unsodered wires, or a broken circut). I hope this helps,
TJ
Only one speaker works
if you have plugged correctly without any losse contact it should work if not o think your speaker configration is not correctly set go to the control panel->sounds and audio devices->device volume->advanced there u set that balance slider to middle of all volume control,wave,sw synth,line in etc.. then go to speaker settings in the same window of sounds and audio drivers there in speaker settings click on advanced you get another window in that drop down box specify your speaker configration wether is desktop speakers laptop mono speakers or stereo headphones etc specify the right one you have then ok after this in speaker settings click on speaker volume and keep left and right speakers to maximum then apply ok this will work check it out if stil not worked tell me what ws the result ill solve that for u
Lots of problems please help!
- firstly you check the cable loose/break,
- check it by using multimeter
- dry soldering, loose contact
- resolder soldering points or reconnect cable
- your powersupply transformer coil may breaked now it become loose contact.
- you check the supply output voltage with and without load
- if low or no output voltage replace supply
- if you don't get the proper transformer rewind it
- also check power amplifier section short ckt
Why does my sub woofer not work
it could be a connection from not grounded to your aux cords being crimped and messed up could be amp or could be a setting on your radio..
Cyber Acoustics CA-3618 subwoofer cuts in and out.
Crackling noise and cut outs generally mean that the speaker is torn, or the cone is separated from the driver. This means the speaker is broken irreparably. It sells for $40 now, which means it is not worth fixing. These low cost speakers are built to not be taken apart.
HDTV Digital coaxial output to CA-5001
The speaker system has RCA jacks that connect to and from the Speaker system and you Computer/TV/Player/ or Amplifier. There are no Coaxial IN/Out on this system. It is not HDMI, only a standard 3 wire sound system. Front (green), Center (Yellow) and Rear (Black). Correspond the colors with the RCA input on the computer or other devices you wish to use it with.
Lost driver, no icon or
Hello and Welcome to FixYa!
Please provide us with the model of your computer and the Operating System (OS) you are using....So that we can check and provide you with the driver details.
Concerned.
Ive had these speakers ever
Hi, need to know your operating system to help you, but you can try the Realtrek AC'97 sound driver, its free to download from a google search.
I have ac201 stero pc headset with
take a 1.5 volt batery cell... attach one side of cell it to the end of headphone pin... attach other end of cell with a wire and tap that wire on the headphone pin ...u shud get a clicking sound in ur headphones.... this is to check if ur headphones work...
if they work... apply a drop of mobile oil on the headphone pin and insert it in the jack and spin it so the oil reaches the inside of jack then let it dry for a while....
attach the headphone to jack again and play the audio ...if this doesnt give u any output.... check ur sound driver software
I just received these speakers and they have
There could be many causes.
Bad socket on the computer
Dirty volume control
Dirt in and on the speaker cone
Speaker cone torn slightly
A wireless device that may be too close to them eg cordless phone (I know my cell phone is going to ring before it actually does as I get a signal from my speakers)
I have a can of "electrical contact cleaner" which I use to see if it fixes the first two items.
2nd and third item can only bee seen by opening up the speakers.
for dirt I use an air can for cleaning computers but not too close to the cone.
For a torn cone I replace the speakers.
Last item is pretty ease just move the offending item to a new location.
Not finding what you are looking for?
