20 Most Recent
Sony Handycam DCR-TRV250E Digital Camcorder Questions & Answers
Flashing yellow arrow
Take the battery out and turn selection switch to camera and then turn it off. Put the battery back in and its working again.
if that doesn't work try
Try smacking the side of the camera relatively hard with the palm of your hand. Eject the tape and reinsert. You may need to do this a couple of times.
I have a Sony Digital
yes you can fix it your self,that is if you have another play head.before changing the cylinder you can try cleaning it with a clean white paper,note you need to be careful while cleaning with paper
"USB driver cannot be installed
You can only install USB driver into a compatible operating system.
So therefore try and install the driver into a Operating system version support by your devices.
Or you check sony support online through google to download driver for your type of Operating system if available.
Best regards.
PLEASE CAN YOU SAY IS
Ok so here is the link for that particular model
http://esupport.sony.com/US/perl/swu-list.pl?mdl=DCRTRV250&SelectOS=44 all you should have to do is select your operating system. However if you still have issues after that try plugging in your cam to the computer and running microsoft update if it doesnt autodetect and download the drivers. Alot of time if you change the hardware connected to a pc and run update especailly with windows 7 it will find them online.
Like it if this has helped you Please!!!!
I have windows 7 home
Hello, I too use the same camera, the driver for your camera is now free for download on the net to work with Win 7 okay? all you need do it connect your movie camera to the firewire prot on PC (NOT USB) and into the camera it goes into a tiny little plug like a D shape.
Once you have camera connected to PC then turn PC on and your PC finds your camera right away once booted uo.
I get the error code
The C:31 42 error code can represent a variety of issues, including moisture on the head and a dirty head. To start: try removing the tape, leaving the camera open in a dry place for an hour. You could even try using a fan. Make sure the power is off.
After an hour:
Then try putting the tape back in the camera and try recording/playing again.
If that does not work it may require that you use a head cleaner in your camera. You can get one at Amazon.com http://www.amazon.com/Sony-V825CLD-Camcorder-Cleaning-Cassette/dp/B00005TQKQ/ref=sr_1_1?ie=UTF8&qid=1299295358&sr=8-1
If those solutions do not work, you can also try a hard reset on the camera, which will wipe all of your settings and set everything back to 0.
Good luck!
HOW DO I COPY MY
To get the best quality use the fire-wire connector. You can use the USB port but this is not fast enough to get good results. You will need to install the drivers and software on the CD that came with the camcorder and you also need some good video capture and editing software.
Not finding what you are looking for?
