20 Most Recent Likom Futura LD7 17" CRT Monitor Questions & Answers


Sounds like dodgy kit.

Likom Futura LD7... • Answered on Nov 20, 2016


You should first ensure that the"fly lead" is connected between the monitor and the computer otherwise you wont see anything at all.

Not all monitors have USB ports and the implementation is not always the best.

I would start by formatting a usb drive and ensure it is formatted to FAT or FAT 32 (most offer that in the drop down format menu) do the format on a known computer not monitor.

Once done plug that into the monitor to see if it shows.

If not come back and give any additional information to this post.

Again check you have the fly lead in first.

Bob

Likom Futura LD7... • Answered on Dec 19, 2011


Adjust your monitor Brightness and Contrast and make sure you set it high enough to be able to view text and images. Refer to the monitor manual.

Likom Futura LD7... • Answered on Nov 15, 2009


try playing with the input settings on your monitor, its happened to me a few times, but yeah just try to do that.

Likom Futura LD7... • Answered on Jul 20, 2009


It was stupid, the volume on the monitor had been turned all the way down. I checked to make sure it wasn't muted but never checked the volume level. Thanks anyway.

Likom Futura LD7... • Answered on Apr 08, 2009


Hi,to me it would seem real strange that TWO monitors would fault simultaniously. I would be more inclined to believe that it is the Video card itself... The ONLY way to find out is try a replacement and see... try the monitor(s) on another PC see if they work.... if they do then it's ya card 4 sure.. if it's still the same well then it IS ya Monitors good luck.

Likom Futura LD7... • Answered on Sep 17, 2008


There may wrong setting of refresh rate. Most monitors work at 60 to 70 Hz refresh rate. Above that they tunned blank screen or out 0f range message displayed. Also check the output video signal. Please confirm technical specifications from the documentatation of the monitor.

Likom Futura LD7... • Answered on Aug 16, 2007


I don't think a monitor setting is causing Windows to not appear. Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers. Good luck.

Likom Computers... • Answered on Jul 27, 2014


we cannot give it to you it is against fixyas terms of service and *******. you gotta pay to play

Computers &... • Answered 5 hours ago


SETTING UP A SHARED NETWORK PRINTER

Any printer that is connected to a computer and is connected on a LAN can be configured so all other computers on the same network can print to this printer. This means the computer with the printer attached to it MUST be booted up at all times when other computers want to access the printer. You need to install the printer driver on the computer and configure it as a Shared printer. The other computers on the network need to add this printer to their computer. Follow these steps to set-up a shared network printer - 1. Connect the printer to the computer and install the printer driver. 2. Open Printers and Faxes - right click on this printer and click Sharing - click Sharing tab and click Share this printer, and then if you wish you could change the Share name, then click OK 3. Right click on the printer - click Properties - click Print Test Page to confirm printer installation. Follow these steps to configure the computers on your network :- 1. Open Printers and Faxes - click Add a printer - Next - select a network printer, or a printer attached to another computer - Next. 2. Select Browser for a printer - Next 3. Click on and expand the Microsoft Windows Network down to the computer with the printer - Next 4. Select Yes for - Use this printer as the default printer - Next - Finish 5. Right click on the printer - click Properties - click Print Test Page to confirm printer installation.

Computers &... • Answered 5 hours ago


Follow the Methods below and check if that helps. Method1: Please follow the steps to run System Maintenance troubleshooter on the computer: 1. Type "Control Panel" on the search box. 2. Click on Troubleshooting. 3. Click on View all option on the left side of the Windows. 4. Click on System Maintenance option. 5. Click on Next and follow the onscreen instructions to troubleshoot the issue. Method 2: Run hardware and Device troubleshooter 1. Click on the Start button, and type "Troubleshooting" on the search bar. 2. Click on troubleshooting, then click on "Hardware and sound". 3. Under Hardware and sound, click on "hardware and devices". 4. A pop-up will appear, click on the "Next" button and your hardware troubleshooting will start. If the two methods don't work, you could refer to this article for more methods: 6 Solutions to the External Hard Drive Takes Forever to Load Issue

Computers &... • Answered 12 hours ago


The Proscan PBTW274 smart watch does not have a memory card slot. There may be a memory card slot (SD, microSD) in the smartphone/tablet that you have synchronized with the smart watch. If you have a memory card in that phone, then you can use the smart watch app to send photos directly to the SD card instead of the main memory of the phone. The only documentation for the PBTW274 on the product site, https://www.curtisint.com/product/pbtw274/ , is in French. That manual is here: http://legacy.curtisint.com/html/CustService/Manuals/Smart%C2%A0Watch%C2%A0Manual-PBTW274%20French.pdf . I hope this helps. The manual jumps from the brief mention of the watch features to a long list of tools in the app. I found it unclear at first,as well. Cindy Wells

Computers &... • Answered Yesterday


I can't believe that a Windows PC does not have an optical drive! You can download the software.

XL-550: Software ' SINGER Futura Support

https://futura-support.com > products > xl-550 > software
XL-550: Software. Version: Update version 4.0.0.6 for Windows XP; Windows Vista; Windows 7; Windows 8; Windows 8.1; Windows 10. Release Date: 01/02/ ...

XL-550 ' SINGER Futura Support

http://futura-support.com > products > xl-550
XL-550 · 215 Built-In Stitches Including: 6 Fully Automatic 1-Step Buttonholes and 1 Endless Buttonhole · Extra-Large Sewing Space - 210 mm · SwiftSmart™ ...

Softwares < Support - Singer Sewing Machine

https://www.singer.com.tr > support > softwares
SOFTWARES · FUTURA XL - 400 DRIVER · FUTURA XL - 400 WINDOWS 8 UPDATE · FUTURA XL - 420 DRIVER · FUTURA XL - 420 SETUP · FUTURA XL - 550

Computers &... • Answered 2 days ago


Some keyboards have a feature called "Number Lock" It is mostly found on laptops. But turn it off to regain your default keyboard. On most keyboards it is located near the screen shot, print screen buttons. Push your shift key and the NumLk/ScrnLk button, and your keyboard should return to default. Hope this helps...... :)

Computers &... • Answered 2 days ago


With respect to what we wonder.

Computers &... • Answered 2 days ago

Not finding what you are looking for?
Likom Futura LD7 17" CRT Monitor Logo

Popular Tags

15 questions posted

Ask a Question

Usually answered in minutes!

Top Likom Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Brad Brown

Level 3 Expert

18631 Answers

Cindy Wells

Level 3 Expert

6255 Answers

Are you a Likom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Likom Computers & Internet

  • Likom Computers & Internet

Most Popular Question

lost sound from likom hd17a lcd monitor

  • Computers & Internet
Loading...