Top 20 JVC Cybercam GR-D70 Mini DV Digital Camcorder Questions & Answers

Check out JVC web site for guidance. but with the cost of these items getting to be so relatively inexpensive, it may not be cost effective to have it repaired.

Try this http://www.retrevo.com/support/JVC-GR-D20EK-Camcorders-manual/id/209dj589/t/2/

Te image sensor is replaceable. The cost for the part runs about $130. The labor to install it will vary from shop to shop but you are probably looking at around $200 to repair your camera.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Try taking the lens cap off.

Only if the camcorder is within the WARRANTY limit and has not been tampered will it be possible to get the free replacement.
However you can log on to the JVC SUPPORT site and post your problem to get a response.
If you have an authoirised service center aroung your place it will be best to get in touch for an estimation.

http://support.jvc.com/

You are not able to convert the DV to digital data because there is conflict of the format and the type of file. So it is required that a software must be downloaded to the PC so that the DV files are copied and converted.
Please check the following link and download the program to be used to convert the DV files.

Click on:

http://www.xilisoft.com/dv-to-dvd-converter.html

You can convert the DV to DVD by using the converter.

If the camera is working correctly it's to protect the camera and tape.
The camera has detected condensation inside it's body due to a large change in temperature. eg. when you take the camera form a heated room to an external environment that is very cold.
You simply wait until the camera acclimatizes.

Al

Hi,
Your JVC GR-D70 got ccd imager chip failure problem and ccd imager chip will be replaced to get live view in camera mode to get it record.
JVC offers free of cost ccd imager chip replacement for this model, click JVC CCD Imager Support link for details.
Hope these info will help you.
Thanks.

There is a DEW sensor within the camera as a protection as when there is condensation due to cool condition within the tape can get chewed into the cylinder head drum.
So all what you need to do next time is to keep it in a warm place, use a hair dryer slighly into the door after ejecting tape or you can put the set On overnight without any harm.
When you travel keep the camera covered with a blanket and do not expose the camera to direct AC vent.

You're probably having a ccd or tape head issue, and the ribbon connector from it to the main board is probably loose, and needs to be reset. This will require the unit being serviced and possibly disassembled, which isn't for everyone. If you take it into a camera repair shop, get an estimate first, since the cost of repair can often justify buying another camcorder.

This is usually caused by a failed component in the moisture detection circuitry within the camera and can usually be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

it's the bus line was broke somewhere. You have to change the whole bus line!

I need grd-70 dr?ver.thanks.all.

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I

This is usually caused by a failed component in the moisture detection circuitry within the camera and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Try warm air from a hair dryer over the mechanism with the cassette door open for a couple of minutes. do not over do it. The dew sensor is sending an active signal to the control cct to prevent tape damage in use.

At times the "failed to build a preview graph" error measage appears when the editor has a problem with the capture file format. By STUIO 8 I presume you mean PINNACLE STUDIO 8? Try changing your capture settings, like MPEG to AVI or vice versa.
Otherwise download the latest patch for Studio 8 from www.pinnaclesys.com . It's free if you have registered your copy of the software.
Let's hear from you again. All the best.

probably the ccd imager assembly has failed. The imager in this camera is reasonably priced and easy to replace

the other day i found a thing for a problem like this. someone said to use one of these. not sure. i would try one but my video camera got lost in a fire :( if you try one, post on here if it works please
http://cgi.ebay.com/Easycap-USB-2-0-Video-TV-DVD-VHS-Audio-Capture-Adapter_W0QQitemZ170435042087QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27aeb85b27