20 Most Recent
Questions & Answers
Is it a name brand computer, or a custom build? Most name brand computer manufactures provide nearly all the drivers for their computers online, all you have to do is know the model # of your computer, go to the manufacturers website, and find the display driver, download, and install it.
How conect audio the monitor
You need an rca cable with either 1 plug or 2 plugs depending on how many sound ports your monitor and computer has. Connect one end to the monitor and the other end to the computer. These cables are cheapest at
Most Liquid video tv's and indeed most TV's these days use a RCA power cord. They are available cheaply online and in some dollar stores. You may already have one you can use to test the tv with as desktops use them and some laptops use them as well.
Monitor will not turn on
Most monitors require an input signal before they will resume from a low power state. Other possibilities include a faulty back-light inverter, in which case you will be able to see objects that would normally appear on screen, but they will be extremely dark.
Blinking Blue Light.. >.>
check for loose connection of the video cable connection on the system unit (CPU). blinking may indicate that there is no signal transferred from the cpu to the monitor!
I need a driver for
Allow it to search for a driver, it should install a generic driver. LCD's do not require special drivers
My monitor doesn't come on
i faced the same problem some time ago..
i updated graphics drivers and mother board drivers but then that didn't help
then i came to know that problem was with the dust that was on the PCI interface....
i cleared it n since then i didn't have any such problem!
Power on my monitor then
You should try this monitor with another PC first, but I am suspecting to be power supply problem due to bad DC filters caps (bad caps with dome tops).
If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.
Basic LCD monitor and TV troubleshooting guide:
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.
Not finding what you are looking for?