Top 20 Sony Handycam DCR-HC42 Mini DV Digital Camcorder Questions & Answers

Tape is by itself also abrasive so you might just try running a long length tape from the beginning to the end to see if that does the trick. If that does not do it then you either have a badly clogged video head or a bad unit. You might also want to consider using Carbon tet or equivalent chemical on head assembly.

Google tha make and model, followed by the word manual

Could be the recording head is dirty. Run a cleaning tape through it and see if that makes a difference. Do NOT stick anything in the works to try and clean the heads by hand.

i am very sure the flexible cable connecting the view finder is faulty

kjnm

is you charger working?if you have background in eletronics you may use the multimeter and see if the required voltage is present.if the voltage(required written on your adapter) is present,make sure the cable is correctly connect and then if the problem persist you can change the battery(get a new or put another from your friend to see the real problem)thank you

You can't make the DCR-HC42 work with an SD card. This camcorder uses DV tapes, or Memory Stick Duo or Memory Stick Pro Duo memory cards.

These error codes indicate a problem in the cameras tape transport system. This can be caused by several problems including the transmission gear in the tape mechanism not engaging properly, a defective clutch in the take-up spool or a faulty rotary mode switch. This will require disassembling the camera to repair and can be done fairly inexpensively. However, it's not really a user serviceable problem and should be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This is usually caused by a failure in the tape mechanism and can be quite complicated. This will require disassembling the camera to repair and can usually be done fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Tape mechanism problems can be quite complicated. This will require disassembling the camera to repair and can usually be done fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

This can be caused by several problems including the transmission gear in the tape mechanism not engaging properly, a defective clutch in the take-up spool or a faulty rotary mode switch. This will require disassembling the camera to repair and can be done fairly inexpensively. However, it's not really a user serviceable problem and should be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

The C31 indicates that there is a motor movement problem. I don't have the manual handy at the moment, but the :23 will indicate which movement is having the problem. This is not typically a DIY repair. I woul d strongly suggest that you check the fixed repair cost from a Sony authorized service center. This will not only repair the unit, but also reset it back to factory specifications.

I'll look up the error code tonight and try to update this.

Dan

The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

on camera auto eject

Greetings - you can get the needed drivers, manuals, etc at the Sony support website.

Click on HERE to get the files you need.

Good Luck and have fun.

Mikeywaf

The most likely cause for this is a damaged or defective flexible ribbon cable that connects the LCD to the camera body and can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Tape mechanism problems can be quite complicated. This will require disassembling the camera to repair the tape mechanism and can be done fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Tape mechanism problems can be quite complicated. This will require disassembling the camera to repair and can be done fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Cleaning the head is usually not required if you are recording fairly often. If you recorded after a long gap, then the problem could be due to dirty head, which affects tape playing as well. Buy a head cleaning cassette and see if it helps.