20 Most Recent Hotpoint RLA50 Refrigerator Questions & Answers


Hot compressor is one of 2 things, Flat charge or the system is plugged up keeping refrigerant from moving. Or the compressor is shot.
If the compressor is staying off for a long time, after running more then likely it has thermal over load protection built in to it (Basically kills power to the compressor, after the compressor reach a certain temp), contact a appliance repairman

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_54ae41aaaffbab00

Hotpoint RLA50... | Answered on Aug 15, 2013


Check the fridge sensor. On my Hoover HNMF2805AL80 f/f, first I replaced control module - still freezing.
Have just replaced cheap fridge temperature sensor. Part No. 97061619. Trouble is you have to cut into insulation at back of fridge to replace. I just plugged in sensor & placed inside fridge at back at the bottom - so far so good, only lettuce freezing now, everything else v. cold but not frozen. :)

Hotpoint RLA50... | Answered on Aug 15, 2012


You may have the settings incorrect. I would try the middle setting to set if that would be better. Here is the manual:

http://kitchen.manualsonline.com/manuals/mfg/hotpoint/rla50.html?idRes=599970

Hotpoint RLA50... | Answered on May 08, 2012


FREEZER FAN MOTOR MAY NEED REPLACED. THE EASIEST WAY IS TO TAKE OFF THE BACK PANEL IN FREEZER AND REMOVE THE FAN
MOTOR, TAKE IT TO THE NEAREST APPLIANCE PARTS STORE WITH YOUR MODEL NO.
EASY JOB.
I'm including my article on Refrigerator Repair for your help and convenience.;
Please click or copy and paste into browser for Article

http://www.fixya.com/support/r5816737-fix_refrigerator_psychologically

need more help go here:

http://www.applianceaid.com/procedures.html

MORE TIPS AND TRICKS:
-----------------------------------------------------------------------------------------------------
STOP PAYING FOR EXPENSIVE WATER FILTERS FOR YOUR REF. DO THIS====
http://www.fixya.com/support/r9962087-stop_paying_high_price_refrigerator
-------------------------------------------------------------------------------------------------------
WATER SPLASHING IN FREEZER AT ICEMAKER
THE FILL TUBE IN BACK OF REFRIGERATOR CAN SLIP
AGAINST THE FILL RESERVOIR CAUSING A PARTIAL BLOCKAGE
OR BECOME CLOGGED WITH ICE.
REMOVE THE ICEMAKER AND INSPECT THE FILL TUBE.
RUN WATER IN TUBE TO ELININATE BLOCKAGE AND CHECK
TEMP IN FREEZER. IF TEMP IS BELOW 0 DEGREES, THATS
OVERKILL AND USUALLY A WASTE OF ELECTRICITY TO KEEP IT THAT COLD, NOT TO MENTION THE FILL TUBE FREEZING UP
----------------------------------------------------------------------------------------------------------------------
Thanks for using fixya
Leo Ponder
imufo2
Please VOTE FOR ME AND GIVE ME YOUR TESTIMONIAL IF POSSIBLE, IF THIS WAS HELPFUL
ITWILL BE MUCH APPRECIATED.

Hotpoint RLA50... | Answered on Sep 20, 2011


clean the condensation pan in the bottom as mold has grown in this water

Hotpoint RLA50... | Answered on Sep 11, 2011

Not finding what you are looking for?
Hotpoint RLA50 Refrigerator Logo

43 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Refrigerators Experts

jdthefixer

Level 3 Expert

747 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Hotpoint Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hotpoint Refrigerators

  • Hotpoint Refrigerators

Most Popular Question

39 ve got hotpoint

  • Refrigerators
Loading...