20 Most Recent Philips 23PF9945-37 23" Flat Panel LCD Monitor - Page 9 Questions & Answers

You can go to the website or visit a third party site like the one posted below for a free download of all the available drivers.
http://mtc.mitacservice.com/visitor/v_FileDown2004C.asp

http://cf.ph.gameclub.com/main/cfmain.asp

Yes, the surge protection works on both the switched and unswitched outlets

Its hardware problem. You need to service motherboard and the button switch. Things get stucks sometimes when it become old.

1st You download Webcam Driver.Philips pcvc820b/10 NOT INSTALETER MY COMPIUTERAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.

WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. http://www.kitchentablecomputers.com/static.php - rules Test all power and data leads that attach to your hard drive IDE,SATA the leads from your (motherboard to your hard drive) make sure they have secure dust free connections and are not faulty if its a 40 pin flat ribbon type it will be the first to fail make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even something as small as a faulty electrical fan and its lead can cause you problems computers need all power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error Check your RAM. The RAM is located in the middle of the motherboard. There are tabs that you can push to release the RAM. Remove it and put it back in place until the tabs pop out. Loose RAM can cause your computer not to start properly where you want to see a video signal. Make sure your graphics card is securely seated with no dust built up or in the socket if you remove your graphics check the socket to make sure its dust free Restart your computer then reinstall it this should activate found new hardware wizard Check the vga lead for secure dust free connection or try another vga lead.

Try unplugging your headset, or raising your volume.

http://ptf.com/ssd/ssd+tv+675+techcomuae.com/ http://www.fileguru.com/apps/super_tv_ssd_tv_670_drivers/p2 http://www.fileguru.com/PQ-DVD-To-Apple-TV-Video-Suite/download If these driver packages are not right Rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated.

1st You download Webcam Driver.Need installtion cd for spc2300nc/00After this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.