20 Most Recent Sharp Viewcam VL-Z1 Mini DV Digital Camcorder Questions & Answers

please send to me driver for Mini dv sharp viewcam VL-Z1

Sharp Viewcam... | Answered on Aug 26, 2017

Can't connect my viewcam to PC

Use a fire wire if your PC is up to date and Nero capture sofware its and great software that can make a nce Video clip for you.

Sharp Viewcam... | Answered on Feb 04, 2016

1 Answer

How can I download and burn a CD?

hi,
first of all you won't download the clips, but stream them to be able to be recorded...
for that you need a fire wire cable to connect the cam to the PC... (assuming that the PC have an FW plug !)
then you'll need a video editor software, like movie maker or premi?re the first is a minimalist and free, the second is a professional one and costs a lot...
then after editing you'll have the option to burn a DVD or stream to youtube or whatever you wan to do with the final result...
cheers
mich

Sharp Viewcam... | Answered on Nov 27, 2014

0 Answers

Want to transfer videos from a mini DV cassette to computer.

YOU NEED THE SHARP CD-ROM TO LOAD THE VIDEO DRIVERS ON YOUR COMPUTER TO RECOGNIZE THE CAMERA...PART # IS CDSKAA028WJ01

Sharp Viewcam... | Answered on Oct 28, 2013

2 Answers

I have had the mini DV camera below for some 5

DEW means it's got damp inside the camera body and it must dry out. A warm setting on a hair-dryer (NOT TO HOT) should do or just leave the cassette housing ejected in a warm room overnight is best this should solve the problem. .

Sharp Viewcam... | Answered on Oct 28, 2013

pdf Manual

Viewcam VL-Z1 Mini DV Digital Camcorder Manual

Sharp Video Cameras | Uploaded on Aug 22, 2013

0 Answers

Sharp Viewcam Z AV socket problem

Sharp Viewcam... | Posted on Jun 02, 2013 | Be the first to answer

0 Answers

E007 z1

Sharp Viewcam... | Posted on May 05, 2013 | Be the first to answer

2 Answers

Cancorder not wrking-e007 error message

moisture in the cassette holder. Take out the cassette, leave the holder door open for a couple of hours in a dry, warm location, and it should work again.

Sharp Viewcam... | Answered on Feb 11, 2013

0 Answers

How to transfer video from sharp vl-z100

Sharp Viewcam... | Posted on Oct 18, 2012 | Be the first to answer

0 Answers

Sharp slimcam 64x digital zoom/what connector to us for computer

Sharp Viewcam... | Posted on Sep 04, 2012 | Be the first to answer

1 Answer

Where to download driver of Sharp viewcam VL-Z1 Mini DV

Sharp website,,should have driver downloads ,,search online,,make sure its driver for your version windows os,,good luck

Sharp Viewcam... | Answered on Jan 07, 2012

0 Answers

Sharp viewcam vl-z100

Sharp Viewcam... | Posted on Jan 05, 2012 | Be the first to answer

1 Answer

I do not have any rca or s-video input on my computer. How do I plug it in to copy it on computer?

Have you checked if it has other connectors? Typically, it might have a 3mm round plug, that is the same as your 3mm headphone stereo plug socket. The one on my camera has this but is has 4 coaxial connections along the shaft, instead of the 3 that you would see on a headphone plug. You will then need a suitable cable which would have RCA plugs on the other end. Alternatively, check the manual. Remember, if you don't have a manual for it, just go onto the Sharp website, and download one. They usually have them available for free.

Sharp Viewcam... | Answered on Dec 12, 2011

1 Answer

No power my wife plugged in the lead for the

Possible that the power supply is damaged, there is a fuse link but you must be lucky to have it blown before any damage is done. So you need to open the set to confirm, attempt to open the panel and check on the power supply only if you are equipped.

'

Sharp Viewcam... | Answered on Oct 25, 2011

1 Answer

How do I locate the

The dew sensor is located in the cameras tape mechanism. This will require disassembling the camera to remove the tape mechanism and repair. This can usually be done fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Sharp Viewcam... | Answered on Aug 21, 2011