20 Most Recent Bravetti Platinum Pro Quad-Blade Food Processor - Page 8 Questions & Answers

Contact Kitchen Aid, they have some replaceable parts. :-)

It should have come with a charger if the battery is rechargeable. Contact manufacturer. :-)

Try manualsonline.com or the manufacturer

Use some good old Duct tape on the spindle. :-)

1. Peel and grate the ginger, and also grate jaggery. Add water to tamarind and boil it till tamarind becomes soft.
2. Take a kadai add 2 tbs oil and fry the grated ginger for few minutes or till it changes colour to light brown.
3. Then grind together garlic, ginger, turmeric, jaggery, chilli powder, salt and tamarind pulp into a fine thick paste don't add water, grind it with tamarind pulp.
4. Heat a kadai and add 10 tbs of oil to it. Now add mustard seeds, chanadal as well as urad dal, and when the mustard seeds splutter add the ground paste to it and fry for a few seconds. This pickle goes well with idlis, dosas, and also with rice.
5. Shelf life - 2-3 weeks.

manufacturer small appliance repair shop online search

Type in the search bar the brand and model of your unit. There should be a resource in the results that return. Good Luck, Ned

Put name and model number into google

There is no best choice than this. What else to say.

Try the manufacturer.

https://www.manualslib.com/manual/1280003/Ambiano-Z3050.html

return it for one that works

Try this site that I have used. https://www.manualslib.com/

Refer to the instructions that came with item and check warranty section.

Have tried putting heating the food pusher with hot water then putting some crushed ice in the cup? This may help

Too much caffeine can cause heart palpitations.Best ask your doctor to be sure.

Afraid that it might but you can clean the stain if you use a few drops of bleach in water in the processor or what I do is leave a denture cleaner tablet in water in the processor for about half an hour then rinse thoroughly.

Email where you bought it from and include your photograph. Tell them you would like a replacement as soon as possible please. You should not have to pay for it or for shipping. If you have any trouble contact manufacturer. :-)

SOLVED: Why won't my blades turn? - Oster Blend-N-Go My Blend - iFixit

https://www.ifixit.com/Answers/View/259808/Why+won't+my+blades+turn

3 answers Oct 1, 2015 - The blades may not be turning because the blade assembly is not fully ... Blades do not turn but the motor runs. ... this is a touch and go motor so it is easy to start the motor withoutproperly ... The blade should turn, if not they need to be replaced. ... My blender isn't even a year old and blades wouldn't turn. Why is my Magic Bullet just humming, but the blades ... 1 answer Oct 29, 2015 Why are the blender blades not rotating? - Ninja NJ600 6 answers Apr 30, 2015 More results from www.ifixit.com

http://www.fixya.com/support/t21485929-need_replacement_cups_turbo_chopper