20 Most Recent RCA CC6384 Camcorder - Page 5 Questions & Answers

We will check our inventory ok, but we have also technology to replace your unit with a universal adaptor on your unit itself

Have you tried running the white balance? These cameras did not have auto white balance. You have to "shoot" a white card in the light that you will be using for taping.

Let us attack this from a different perspective. What is the problem with the camcorder? Typical labor rates will be in the $150 range, so you are looking at that much for the repair without parts. Please update this with a problem description and I'll try to provide you with what needs to be done to fix it.

Thanks,
Dan

Ok, this sounds like a hardware problem, or the screen cable might be cut, but its most likely a circuitboard issue in the camera. Can you post the brand and model?

Hows is your warranty? your warranty should cover fixing this.

To get your LG LV720 video cassette recorder out of safe mode, you can follow these steps: Locate the original remote control that came with your VCR. Look for a button marked as C.LOCK or LOCK. Press this button. This should allow you to exit the safe mode3. If you don't have the original remote, you might face some difficulties. Some users have reported success by pressing the record button for 6 seconds on their Panasonic VCRs but it's unclear if this will work for an LG model.

Hi, which type of system you use ? if your computer is not equipped with the requirement, this will not work properly,

https://search.yahoo.com/search?fr=mcafee&type=E210US1494G91826&p=my+ac-30+Moultrie+trail+cam+says+it+is+busy+and+won%27t+take+pictures This site has several may help with your problem

All question need 'make model (what it is) as first 3 words please. https://www.google.com/search?q=sdr-b853009+reset All answers can be found on Google. ..

I would check the IR lamps work on the front of the camera.

Depends on what type of camera but this site may help you. https://www.instructables.com/Fix-JVC-GR-DV800U-Camcorder-Error-Messages-E01-E02/

https://files.canon-europe.com/files/soft29721/Manual/MV550i_530i_En.pdf

That particular model doesn't seem to be listed anywhere. Contact the maker direct. https://www.google.com/search?q=Wilderness+Innovations+trail+cam+K8B37D+manual ..

This may be bad belts, and what you should check for is the belts on the side of the tape deck toward the lens and pickup(front), and the drive belt in the middle. All the belts are under the circuit board, so you need to remove that to get at them, and then you can replace them with rubber bands of same or slightly smaller size. Use a screwdriver to help get the old belts off, and put new ones on. (In the tight space) Then check if the tape deck opens and closes, and see if the tape moves when you hit play/record. If you put in a tape you know has a video written onto it, then put that in, and try to play it. If you get a noisy or staticky picture, then try wiping the video head drum(Big shiny cylinder that spins, with the small slits in the side.) with some alchohol and a glasses cleaning cloth or paper. Also, wipe the audio/control head, the silver box that the tape runs across just before it goes by the black roller. Also, check for gunk or obstructions that have gotten in the mechanism of the tape deck in the back. Make sure the video drum is spinning, and that the tape is pulled out of the cassette by some small rollers and wrapped around the video drum DURING playback/record. I say 'during' because some camcorders will retract the tape back to the cassette for fast forward and fast rewind. I hope you get your camcorder to work! Thanks! 73 Sincerely, Beauregard42. (<-- My YT channel where I have some tech stuff)

Then what happened ?