Scubapro UWATEC Smart Com Console Dive Computer - Answered Questions & Fixed issues


I have a smartcom very nice dive computer this issue can ONLY be repaired by scubapro themselves the smartcom is obsolete they will give you trade dollars toward a galleo or luna which are better dive computers

Scubapro UWATEC... | Answered on May 16, 2014 | 547 views


Oral inflate bcd and place in water watch for bubbles if in bladder send it back to scuba pro for repairs dump valves have seals that can be replaced

Scubapro Scuba... | Answered on May 16, 2014 | 260 views


these are controlled by scubapro due to they need specail testing equipment to repair regulators E..G now IP pressure is 135 psi and there is no adjusting screw shims and springs then the cracking effort test to see if you have pressure flutter or creep. these can not be seen with out testing equipment.

Scubapro Scuba... | Answered on May 16, 2014 | 401 views


yes thats all you have to do, just make sure the lock ring is in place correctly. good luck and have a great holiday.

Scubapro Scuba... | Answered on Nov 04, 2010 | 281 views


Try to spray the commercial available mist to lower surface tension in order to avoid build-up of condensed water

Scuba Diving &... | Answered on Nov 02, 2018 | 359 views


get that from <a> here </a>masskarafestivals.com/masks/

Scuba Diving &... | Answered on Nov 11, 2017 | 726 views


Hey Candy,
I am sorry to tell you that NO ONE on fixya can help you,, we have NO WAY to find out any information of that type,, PLEASE contact the carrier AND the company that sent you the package... and your credit card company..(if that's how you paid for it!) ..and from now on - ALWAYS get something sent with SIGNATURE REQUIRED!!

Scuba Diving &... | Answered on Sep 17, 2017 | 1,219 views


the law of buoyancy is the principle that describes why some objects float over water and some others sink: when you put something in water, it receives an upword force equal to the weight of the water it displaces.
this is important in diving in many ways.. and in particular, in diving, you always want to have a neutral buoyancy: this means that if you are standing still in water and you have a neutral buyoancy, you don't sink nor come back to surface

you have a neutral buoyancy if you "displace" always the correct volume of water.. in other words, you always need to occupy about the same volume: if you go in deep water, the water pressure will "reduce" your volume, so to mantain a neutral buoyancy you have to inflate air in your buoyancy compensator jacket to expand its volume.
otherway, if you're coming back to surface, pressure reduces and your body occupies more volume, so you have to deflate your jacket.

Scuba Diving &... | Answered on Jul 30, 2017 | 2,008 views


it depends on the quality of the mask and it depends on how you stored it (if you leaved it at sunlight, if you washed it thoroughly after using it in the sea...)
i have a mid quality mask Mares mask, i have been using about 20 times for snorkeling, then i used it to take diving certifications in pool, then i used it for about other 20 dives in the sea... i always stored it in a dark bag (the mask is now about 8 years old)
you can check if you mask is still in good shape, and the silicone has not worn out, in this simple way: just put the mask on your face without straps.. remove all the air inside the mask by inhaling with your nose.. then look at your feet (keep inhaling): if the mask remains on your face you can keep using it

Scuba Diving &... | Answered on Jul 29, 2017 | 2,007 views


The two main types of dive computers are wrist dive computers and console dive computers. Wrist dive computers are actually just like wrist-watches (a little bigger) and are worn on the diver's wrist. Right now, they are smallest dive computers available.

Console dive computers are attached to the diver's equipment by a hose. Main difference between console dive and wrist dive computers is that console dive computers include pressure devices in them.

Scuba Diving &... | Answered on Nov 29, 2016 | 2,299 views


You need to consult with a factory technician. Your life depends on these devices. I am certified in USD Survivair and no one can set those after a rebuild kit without special tools and measuring devices.

Scuba Diving &... | Answered on Jul 26, 2015 | 1,550 views


They have eight legs and are Cephalopods.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCYQFjAA&url=http%3A%2F%2Fen.wikipedia.org%2Fwiki%2FCephalopod&ei=EB0FVaWtI8zLsAT30IE4&usg=AFQjCNETlGDK7Bi6L4BhBnDiJq2tqVBCQw&bvm=bv.88198703,d.cWc

Scuba Diving &... | Answered on Mar 15, 2015 | 875 views


Yes...the octopus does exist.

Scuba Diving &... | Answered on Mar 02, 2015 | 806 views


Please see Page 28 of the manual http://ns.suunto.com/Manuals/Companion/Usermanual/Companion_usermanual_EN.pdf

Scuba Diving &... | Answered on May 16, 2014 | 870 views


how to make schools project's jaws of life

Scuba Diving &... | Answered on Mar 03, 2016 | 3,267 views


I noticed another FixYa guru here answered a question on another strand that applies to yours:
Also, please note this person on FB claims to be the Lemax fix-all guru. You can ask them more specific questions:http://webcache.googleusercontent.com/search?q=cache:0YBPB3sM28kJ:https://www.facebook.com/eHobbyTools%3Ffilter%3D2+&cd=10&hl=en&ct=clnk&gl=us

The Knex website has building help for this problem. There answer is as follows:
Make sure all rods and connectors are fully hooked together, especially the blue and gray connectors. Even one peice not fully hooked together can twist the model just enough to jam the gears. (You may have it hooked together correctly prior to jam problems so it is good to check since I found a loose on holding the motor.) The chain links need to all be attached in the same direction, and fully hooked. The chain also needs to be on the tower with the hooks facing down and in as the chain runs on the outside of the tower. (Chain should be outside on the front and inside in the back with the 5 yellow bar side in the front.) Check that all gears are positioned correctly according to the instructions and the teeth facing the correct way. If you are still unable to get the seat to drop, you may remove the top yellow cross rod that the chain runs over - the model will also work with this piece removed.

I did all of these steps with my son and his still had trouble dropping all the time. It still seems light so the seat didn't have enough weight to drop with gravity during the non-moving cycle of the orange half gear. We decided to tape on 2 marble passengers to see if that helped. It did!!! When searching for other solutions, I noticed a UTube video that added people also so this seems to be a common solution. Try it or some other light weight added and see if it solves your problem.

Scuba Diving &... | Answered on Nov 20, 2013 | 342 views


Hello, There is one thing on some computers that will restart it like the day you bought it, see if there is a very small symbol that looks like a shooting star taking off from the ground and making a U turn and back down that\'s the best I can do for what it looks like, it will be only about 1/8 th in. tall and 1/16 th in. wide very small, it should be close to the power on button on your comp. this is a Rescue System to start all over from day one, I have a Lenovo G570 Laptop and it has one of these, thank god as my comp. got a very sick and would not even let Windows start up I pushed this button and I was able to clear all the stuff that was stopping it from opening, if your lucy you will have something like this on yours, Look it over real close to find this symbol, sorry I don\'t have a pic. for you, you could also check if there is a Tech. help line for your brand of comp. Well I hope this may help in some way, and get you back on line.

Scuba Diving &... | Answered on Aug 22, 2013 | 448 views


What I think will solve your problem is dynamite????

Scuba Diving &... | Answered on Mar 30, 2013 | 377 views


Dave,
Good luck with that...... A MUCH more reliable way to go is a small pony bottle, say a 13cf with an inexpensive reg and a pressure gauge /plug or better yet a regular SPG.. That way you have a real reg with a whole lot more air with which you can more comfortably share air or hopefully save yourself or do a bit of a safety stop on the way up.

Scuba Diving &... | Answered on Mar 12, 2013 | 484 views


Dive computers display a large variety of information relevant to the diver's needs. Such information includes: Current depth, elapsed dive time, and how much time remaining the diver has before having to make decompression stops.

Scuba Diving &... | Answered on Feb 06, 2013 | 489 views

Not finding what you are looking for?
Scubapro UWATEC Smart Com Console Dive Computer Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Scubapro MK25/G250 Hp Regulator
Scubapro MK25/G250 Hp Regulator

5 Questions

Scubapro Full Face Mask, All
Scubapro Full Face Mask, All

2 Questions

Scubapro MK17/S555 Regulator
Scubapro MK17/S555 Regulator

2 Questions

Scubapro MK17/X650 Regulator SCUBA Equipment
Scubapro MK17/X650 Regulator SCUBA Equipment

2 Questions

Scubapro MK2 Plus/R295 Regulator
Scubapro MK2 Plus/R295 Regulator

2 Questions

Top Scubapro Scuba Diving & Snorkeling Experts

Bill Boyd

Level 3 Expert

53816 Answers

ray gallant

Level 3 Expert

71004 Answers

Tom Chichester

Level 3 Expert

61131 Answers

Are you a Scubapro Scuba Diving and Snorkeling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...