20 Most Recent Acer AL1714 17" LCD Monitor Questions & Answers


if you know how to open it its simple replace the switch botton on your monitor replace all

Acer AL1714 17"... • Answered on Sep 18, 2015


[u][b]LCD Monitor Shadow Effect[/b][/u]
This problem is best described as the LCD monitor "Shadow Effect".
The solution to this very simple. No software or hard ware changes required.
The cables that are connected to the LCD monitors are causing the problem. Its also called as electromagnetic noise or electrical noise.
[u][b]Solution: [/b][/u]Keep the two cables - (power cable and moitor display cable), that are connected to the LCD monitor as far away as possible with each other and also away from other electrical cables.
Thats it. Your shadow effect is fixed.
Thank you.

Acer AL1714 17"... • Answered on Nov 06, 2014


Just Unbrighten It Like A Mathlomagitionlenzeno

Acer AL1714 17"... • Answered on Jan 29, 2013


HI again,

I think you will have to go for a repair but anyways i suggest you to ask the other experts.Like Irish druid or bestdarngood.

Acer AL1714 17"... • Answered on Oct 28, 2011


Look for buttons on the monitor, there should be a menu button allowing you to select a bunch of editable settings, usually including a brightness setting.

Acer AL1714 17"... • Answered on Jul 27, 2011


The power consumption for the model monitor is 51 watts.
For the specification go to this WEB site :-
http://www.dealtime.com/Acer-AL1714/prices

Acer AL1714 17"... • Answered on Oct 04, 2010


Hi! Looks like the monitor is in stressed and can't stand long time use. Replacing these parts plus labor is like buying a new one for it will take time and the availability of the parts. I strongly suggest that you buy a new one which can cost you less. HOpe this helps and thank you for using FIxYa!

Acer AL1714 17"... • Answered on Oct 03, 2010


Can you feel that it click when you push on it? It is a momentary type tactile switch that you can get from <a href="http://www.mouser.com">www.mouser.com</a> that you need to match the size and dimensions.<br /> You may have problem some where else.<br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">If you are going to DIY and have proper tools and know safety precaution then please read on:</span><br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: <a href="http://s807.photobucket.com/home/budm/allalbums">http://s807.photobucket.com/home/budm/allalbums</a></span><br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Post back what you see inside so we can guide you further and it will help out other people in the future also.</span><br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'"><a href="http://en.wikipedia.org/wiki/Capacitor_plague">http://en.wikipedia.org/wiki/Capacitor_plague</a><span style="mso-tab-count: 1"> </span></span><br /> <span style="FONT-SIZE: 10pt; FONT-FAMILY: 'Arial','sans-serif'">Capacitors kit: <span style="mso-spacerun: yes"> </span><a href="http://lcdalternatives.auctivacommerce.com/">http://lcdalternatives.auctivacommerce.com/</a><span style="mso-spacerun: yes"> </span>he can make you a set of caps for you.</span><br />

Acer AL1714 17"... • Answered on Aug 26, 2010


jorickfranke, A picture is worth a thousand words!! Or in your case, a "video clip" at YOUTUBE! ! ! Search This "lcd monitor disassembly" or "lcd monitor repair" I'm sure you will find out how to do it. Just don't use sharp cutting instruments for "parting" the rear cover from the "front bezel" of unit. Cost of repair increases 10 fold if trip to hospital "ER" is required.
Good luck. 12fixlouie

Acer AL1714 17"... • Answered on Aug 25, 2010


Check the caps in the power supply/inverter board.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net
Capacitors kit: http://lcdalternatives.auctivacommerce.com/

Acer AL1714 17"... • Answered on Aug 08, 2010


You need to download the drivers here for your ACER: http://support.acer-euro.com/drivers/index.html

Acer AL1714 17"... • Answered on Apr 15, 2010


For best display on LCD monitor, you need to set the PC video resolution to the native resolution of the monitor, this monitor native resolution is 1280 x 1024 @60Hz.

Acer AL1714 17"... • Answered on Mar 29, 2010


use graphic adapter options and you will see the key to change the orientation it is something like alt alt arrow key etc ..which you need to find in the adapter key settings..

Acer AL1714 17"... • Answered on Feb 26, 2010


Yes you can remove the screen in same model LCD. If screen is OK.

Acer AL1714 17"... • Answered on Dec 11, 2009


mccampbell71 Probably a failure of inverter circuit(dc to ac 600-1100vac) to light-up (sustain) "cold-cathode-fluorescent lamps" causing the "switch-mode-power-supply" to go into full or partial SHUTDOWN mode. Black Screen of Death strikes again!!! The Question I have is why did you BUY a "black-brick" supply? Did the other one fall out of the car or get run over by a train? Only you will be able to make the decision of to REPAIR or Trade-in for new. You are no different than 5000 others worldwide (all brands) who have monitor's with BSOD! Yes, some (75-90%) can be saved to work 1-3 more years! Read some of my other responses in my profiles (12fixlouie aka louie12fix) to learn of the options you have open to you. Bye for now 12fixlouie If this info was of some use please rate on fixya.

Acer AL1714 17"... • Answered on Nov 13, 2009


There is a symbol of Two monitors on F3 Or F4 button

1. Press Fn key and hold it
2. by holding Fn key press F3 key

Your monitor will start displaying

Acer AL1714 17"... • Answered on Oct 05, 2009


HI,

I am not a LCD Tv expert so my advice won't be of use to you.I suggest you to ask the same to Ginko or Benimur.

Acer AL1714 17"... • Answered on Jul 22, 2009

Not finding what you are looking for?
Acer AL1714 17" LCD Monitor Logo

51 questions posted

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Brad Brown

Level 3 Expert

18631 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

AL Acer

  • AL Acer

Most Popular Question

bright

  • Computers & Internet
Loading...