20 Most Recent
Hotpoint RVM1625 Microwave Oven - Page 4 Questions & Answers
Control panel not working
If you can open up, try to clean the ribbon connector. My oven was sending "1" all the time, filled the memory and caused permanent beeping! I wanted to cut off the "1" connection but after opening I found that the panel was diffuclt to disassemble. I just cleaned the ribbon connector and put it pack. It needed a few attempts to get it to work all the buttons properly. But then it has been working for more than year without problem!
10/16/2013 8:28:00 PM •
Hotpoint...
•
Answered
on Oct 16, 2013
How to remove RVM43003
You can
download GE
owner's manuals and installation instructions
here.You can find
helpful exploded view diagrams and order parts by entering your full
model number from the tag on the oven here.
We're happy
to help you with free advice and we'd appreciate your thoughtful rating
of our answer.
1/17/2013 4:31:52 AM •
Hotpoint...
•
Answered
on Jan 17, 2013
Hotpoing microwave
use the logically, clearly, fix it .God bless youa stuck key or non-responsive key, most of the time you will have to
replace the keypad for this microwave oven repair. If your keypad is
connected to your control board by a flat ribbon wire, try disconnecting
it and clean the silver contacts with an ordinary pencil eraser. After
cleaning, plug it back in and try it. If it doesn't fix it, replace
the keypad unit. Some units actually have keypad tests to confirm your
diagnosis of a bad key.If your keypad and control is the same
unit, replace that unit. Another note, unlike stove/oven keypads and
controls, most microwaves do not have error codes or tests to
distinguish whether it is truely the keypad or control. Most of the
time, it is the keypad that needs replacing, but a small percentage of
the time it can be the control. Check the tech sheet if they can point
you to the right part.
8/3/2012 9:50:55 AM •
Hotpoint...
•
Answered
on Aug 03, 2012
Microwave control sparked
There is a major short in the keypad control board, this may be a good time to consider a new microwave oven. The parts and service call will easily cost more than a new one.
6/25/2012 10:51:13 AM •
Hotpoint...
•
Answered
on Jun 25, 2012
Microwave keypad dont work
The problem is in the keypad control board, cost will run high making a new microwave oven attractive.
4/7/2012 4:05:45 AM •
Hotpoint...
•
Answered
on Apr 07, 2012
Not finding what you are looking for?