20 Most Recent BenQ FP567s 15" LCD Monitor Questions & Answers

Video Graphics Card in Computer "BAD" !

BenQ FP567s 15"... | Answered on Nov 15, 2017

seems many users face same problem

BenQ FP567s 15"... | Answered on Jan 28, 2017

If you have some electrical equipments like CVT, UPS near to your monitor, please put them away. If the flickering is due to the maganetic interfearence then it will solve your flickering of screen. and even after this if you are not able to use your monitor buttun then please call your technical expert b.coz your monitor may got some physical problem.


BenQ FP567s 15"... | Answered on Nov 23, 2012


The monitor is going bad. There are parts on the power supply board which are failing. You can send it to a company like mine or take it to a local repair person. See my website.

BenQ FP567s 15"... | Answered on Apr 14, 2012

I am looking for the LCD panel from a 567 V2.
If you can't repair the problem e-mail me and I would like to buy one from you for parts.
[email protected]

BenQ FP567s 15"... | Answered on Apr 14, 2012

That is because your monitor has faulty capacitors. Capacitors in your monitor have a job to hold down power as it comes from the source long enough for a proper display. The only way to get around this problem is to open up the monitor (You can get a computer technician to do this for you if you can not do it by yourself). Or you can get a sharp - flat object and start opening (splitting) the two covers apart from the bottom of the monitor. You will notice finger-like structures that are holding the covers together. Make sure you do not break any of those. When you open it up, then check the circuit board where the power supply cable is connected. Check for any bulged or leaking capacitors. When a capacitor is bulged or leaking, it only holds power for at least 2 to 8 seconds then looses it. Buy the same type of capacitors and replace the faulty ones. Make sure you note the polarity of the capacitors before replacing (+ and -). This will definitely take you out of your trouble

BenQ FP567s 15"... | Answered on Feb 21, 2012

The silver hwite/grey screen means that the LCD panel is not getting the signals, 5vdc from the logic board. Try reseating the connections between the logic board and the LCD panel first.
Also check the power supply caps.

Basic LCD monitor and TV troubleshooting guide:

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series

BenQ FP567s 15"... | Answered on Dec 13, 2010

usually for these kind of issues., here are some common steps that helps at times.
1. Check the VGA Cable that connects the Monitor to the Tower (CPU).
2. Reseat the Cable once.
3. Remove the VGA Cable & turn on the Monitor Alone. See if you get any display saying "No Signal" or anything similar. If there is some display, then it means that the problem is with the Tower (CPU) & not with the monitor.

Hope this small sugession helps.
Cheers!!! Have a nice day!!!

BenQ FP567s 15"... | Answered on Sep 14, 2010

The caps has to be low ESR (Equivalent Series Resistance) type, with 105c rating, otherwise they may not last and causes mor damages.

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

BenQ FP567s 15"... | Answered on Aug 17, 2010

what do you mean? You are getting that message when you switch on? Have you checked the signal cable between your PC and your monitor? If you cable is connected properly and you are still getting that onscreen message, it means your monitor main board has failed, and if its out of warranty, its time to get a new one, because few repair shops will touch them, and when they do, it is not cheap.

BenQ FP567s 15"... | Answered on Jun 18, 2010

first check the monitor by pluging in on different source like another pc or laptop and see if pic is still pink if thats the case

check the vga socket in monitor for pins that are bent or damaged try straighten then with some pointed object and see if it works

otherwise if ur pic is still pink then ur monitor is faulty but i think this is not the case
if ur lcd works fine on other pc or laptop then my friend ur vga card is faulty u need to replace it this is the only solution

pls rate me FIXYA if i fixed ur problem

BenQ FP567s 15"... | Answered on May 15, 2010

half of my monitor is white...please help

BenQ FP567s 15"... | Answered on Jan 25, 2010

Normally you will get beep sound at booting if you have a problem with your video card or under some circumstances with your screen.

Try to plug an other monitor on your computer. If it works than probably your monitor is in problem.


try to plug your monitor on an other pc. If it works than your computer video card is the problem.

Hope it will help

BenQ FP567s 15"... | Answered on Jan 06, 2010

Your resolution setting in your operating system are incorrect.
Reboot into VGA mode (if you're using windows) and modify the resolution until it is correct.
Hope this helps, Sherwin

BenQ FP567s 15"... | Answered on Dec 21, 2009

You may have to put the laptop in presenter mode, which tells it to use the attached monitor. There is supposed to be a key on the laptop which does this, its normally the FN key with CRT/LCD (F8). You can also do it via screen properties but since your screen is broke u'll have to use the key shortcut.

If that doesn't work, then your video card may be bad and you'll have to change it.

BenQ FP567s 15"... | Answered on Mar 03, 2009

Not finding what you are looking for?
BenQ FP567s 15" LCD Monitor Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top BenQ Computers & Internet Experts


Level 3 Expert

13434 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Karan Sethi

Level 2 Expert

158 Answers

Are you a BenQ Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • FP BenQ

Most Popular Question

out range

  • Computers & Internet