20 Most Recent Samsung 710V 17" LCD Monitor Questions & Answers


you must chang your Mainboard for LCD to fix it

Samsung 710V 17"... • Answered on Oct 21, 2019


do one thing remove your monitor from cpu and turn it on only your monitor if check signal cable display is comming on your monitor means you have your cpu problume
thanks

Samsung 710V 17"... • Answered on Jun 23, 2013


some internal components may be burnt. Try changing the display cable first; if that doesnt work then its probably an internal electrical problem.

Samsung 710V 17"... • Answered on Dec 04, 2011


The ideal way is to crros check to see if the PC or the monitor is the suspected fault. So connect an external monitor to your PC and if this works OK then the PC is cleared. Now check the monitor to confirm. If not there are errors in the signal processing section- the point where the input signal from the PC has to be processed. Possible failure of the input IC.
If however the PC does not output it is failure of the graphics card and must be substituted to confirm and replace.

Samsung 710V 17"... • Answered on Jul 19, 2011


This is an issue with synchro : one of the screen mainboard components wears out with time.You can fix it by soldering a 50 ohm resistor, as shown here : http://teleservice.xooit.fr/t6017-Samsung-SyncMaster-710V-Perte-de-Syncro.htm

Samsung 710V 17"... • Answered on Jun 26, 2011


Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Samsung 710V 17"... • Answered on Jul 02, 2010


Check the DC filter caps in the power supply first.
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed SAMSUNG monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Samsung 710V 17"... • Answered on Jun 25, 2010


Kondenzatori moraju imat mali parazitni induktivitet inace nevaljaju , provjeri mali kondenzator u ispravljaču ( on daje snagu ispravljaču ) provjeri diodu i kondenzator u zaštiti u primaru ispravljača ,

Samsung 710V 17"... • Answered on Feb 18, 2010


Try to change the desktop display settings, see screenshots below, see if it works

Right click on your destop and go to properties > settings

  1. Set your Screen resolution to 1280X1024
  2. Then click advanced and go to Monitor and set the refresh rate to 60 Hertz.
1608c80.jpg
32bddcf.jpg

Samsung 710V 17"... • Answered on Dec 06, 2009


For anyone having this problem i suggest to get a manual from asnerejas. His notes helped me out totally.
Its not something you would spot looking at its inside...


Samsung 710V 17"... • Answered on Apr 30, 2009


the 710V samsung monitor has only vga analog input. so there is no source button

Samsung 710V 17"... • Answered on Apr 14, 2009


Hi...in Brasil, micon OK ?!

But have modification problem no more !

Samsung 710V 17"... • Answered on Apr 11, 2009


to chabge resolution go to click start
control panel
apperance and themes
display
settings
and down towards lower left hand you'll see screen resolution
then move bar to 1024*768
Mark

Samsung 710V 17"... • Answered on Apr 11, 2009

Not finding what you are looking for?
Samsung 710V 17" LCD Monitor Logo

50 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Jean Thiebaux

Level 2 Expert

162 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

aliasger yq

Level 2 Expert

219 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Computers & Internet

  • Samsung Computers & Internet

Most Popular Question

samsun 710v not optimum mode problem

  • Computers & Internet
Loading...