20 Most Recent
Proview PL913B 19" Flat Panel LCD Monitor - Page 5 Questions & Answers
I stopped having sound coming from the speakers.
Make sure all your connections are tight and you have power to your speakers...Then go Start>Control Panel>Sound and Hardware>Sound, after you are in here make sure that your speakers are selected as default device.
Hope this helps, pls rate
3/19/2010 1:40:10 AM •
Proview...
•
Answered
on Mar 19, 2010
My proview 558 monitor has a 1/2 inch black line at the bottom
ms_biguns, You need to test one or the other, The tower should output and drive a substitute known good monitor, or a known good pc should be able to display the WIN-desktop screen on your Proview 558. Could it also be that the software in pc not set up for driving a Proview558? 12fixlouie
3/1/2010 3:09:28 PM •
Proview...
•
Answered
on Mar 01, 2010
No power working fine walk out of room come back
If you want to repair, you will have to take it apart. The fault is the power supply. after you take it apart look for cap with the tops bluging. if you want post an picture of the power supply board..
2/23/2010 7:28:09 PM •
Proview...
•
Answered
on Feb 23, 2010
Monitor makes a cracking frying sound as it booted
The bulb in those older Monitors dont last too long. Many times whenever you hear that sound its like the tungsten filament burning out or breaking. That's the crackling sound you hear as it boots up. My suggestion would be to get another monitor at this point in time.
11/19/2009 5:05:35 PM •
Proview...
•
Answered
on Nov 19, 2009
I have a Proview (Product #PRO558, Model #568). I
Hello, Linda.
Give this a try:
Hold down the Fn key and press the function key with "CRT/LCD" or picture of a CRT (usually F4 or F8). Toggle through and hopefully the Proview will work.
It also could be a problem with the settings.
Check the BIOS on the PC and make sure the video is set to Default to your video
card rather than AGP or integrated.
It's also a possibility that the VGA port is not working.
Hope this helps.
9/19/2009 9:28:22 PM •
Proview...
•
Answered
on Sep 19, 2009
Power cord for the Proview Model 800
http://www.cablestogo.com/product_list.asp?cat_id=1024
http://cgi.ebay.com/AC-Adapter%2fAdaptor-Power-Cord-For-PROVIEW-LCD-Monitor_W0QQitemZ150338552665QQcmdZViewItem
8/26/2009 6:55:49 PM •
Proview...
•
Answered
on Aug 26, 2009
Our monitor would work fine for a minute after it
you need to go to desktop and right click on a place where there is no icons. than go to properties. then go to screen saver. select power always on and this will stop this. also select no screen saver. good luck and good day
saw
7/6/2009 1:29:37 PM •
Proview...
•
Answered
on Jul 06, 2009
ProView PL716s U101 roasted
I would change the caps anyway, they're cheap. The IC's may be running hot trying to make up for the bad caps.
1/30/2009 2:26:15 AM •
Proview...
•
Answered
on Jan 30, 2009
Monitor power indicator blinks but doesn t show desktop.
you have to put the proper secreen resolution. you do these
1. you checked it with another pc when it shows the screen then change the display properties screen resolution as minimum lke 600X800.
2. you also change the screen refresh rate to 60 Hz to solve this problem.
ok
thanks
11/16/2008 5:25:48 PM •
Proview...
•
Answered
on Nov 16, 2008
Guru
turn the power off to the monitor for 30 50 minutes buy the power point then back on let me know how that Geo's it should reset the monitor
9/10/2008 10:11:56 AM •
Proview...
•
Answered
on Sep 10, 2008
Como cancelar el winter driver
EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,
I need a product key
Have you actually purchased Visio, or are you just trying to get it for free?
As a software guy, I would have to advise against piracy. :)
There are several ways to get Visio for cheap. If you are a student, there are discounted versions available online and in stores. Also, you can check with your school for even cheaper options sometimes. Try the university bookstore if available. Or a Computer Science department maybe.
If you are working, and your company uses MS Office applications, find out if they have the "Microsoft at Home" program. You can get MS Office applications for really cheap that way. I can get Visio through my company's "Microsoft at Home" program for a few dollars.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Not finding what you are looking for?