WARNING: Before you start
troubleshooting remember that you are dealing with electricity that can KILL.
http://www.kitchentablecomputers.com/static.php
- rules
Only work inside the computer case
when the power has been switched off and disconnected. Never open the power
source.
Some of the below steps
recommend removing physical parts within the computer.
While in the computer it is
highly recommend that you be aware of ESD and its potential hazards
Remove the memory modules from their
slots.
Take the
opportunity to clean the slots on the motherboards and the memory module
connectors.
Use compressed air to blow dust away
and clean contacts with a soft cloth.
Do not use a metallic vacuum cleaner
if it touches any component it may create a short and cause damage to the
motherboard or other components.
Do not use
solvent that may attract dust and never poke things like cotton buds in to
slots. lightly rub an alcohol (Methylated
Spirits) on a cloth not to hard let the alcohol do the work on the copper gold
or silver tabs and r
Allow the pins to dry.
They will air dry in a matter of
minutes
If reseating the memory did not
resolve the issue try swapping the location of the memory.
If you have only one stick of
memory in the computer try moving it to another slot and then boot the
computer.
Check the memory module and memory
slot contacts.
They are either copper tin or gold.
The colour will tell you which they
are.
Mixing tin and gold can result in
corrosion that prevents proper contact.
Look for any sign of physical damage
to the memory module, memory slots or the motherboard.
Reseat the memory modules.
You should hear an audible click
when they are in place.
Do not use
too much force to reseat the memory module in to the slot this can cause damage
to the module, slot or motherboard.
Could even
be a virus or malware
Download and install at least one of these all free
depending on your operating system
http://spybot-search-destroy.soft32.com/
Freeware detect and remove a multitude of adware
files and modules.
http://www.majorgeeks.com/Microsoft_Security_Essentials_for_Windows_d6242.html
microsoft security essentials your operating system
must be registered
http://windows.microsoft.com/en-US/windows/products/security-essentials/product-information
malware protection
http://100-downloads.com/download.php?p=615
windows xp microsoft security essentials
http://100-downloads.com/download.php?p=614
windows 7 microsoft security essentials
Thermal compound is a sticky paste that is placed
directly onto the CPU.
http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490
Allowing for a more direct heat transfer between
the CPU and HEAT SINK and preventing air gaps from forming between the CPU and
heat sink.
The hardware that you are trying to access is damaged
or failing.Capacitor
Capacitors, sometimes also called condensers, are
used to store energy in an electric field.
In the context of computing, capacitors are used to
block the direct current being circulated around the motherboard.
A typical capacitor should last up to 15 years, but
some computer manufacturers use substandard capacitors resulting in shorter
lifetimes.
Computer Problems
When a capacitor has gone bad on a computer you may
experience a large range of problems. The computer may have trouble booting up,
or it may shut down without notice after running for only a short period of
time.
The most common problems associated with faulty
capacitors are that they cause unexpected computer crashes and general
reliability issues ranging from read/write issues to distorted screen images.
Identifying a Bad Capacitor
To identify a bad capacitor you will need to open
your computer case and locate the capacitors on your motherboard.
A bad capacitor may exhibit swelling at the top or
the base of the capacitor or it may sit at an awkward angle with the
motherboard, so compare the various capacitors in your computer in terms of
size and placement.
Additionally, a bad capacitor may have a funny smell
or it may have a brownish residue leaking from the top or the base.
Prevention
Manufacturers claim that capacitors may go bad
because a computer is not receiving enough power from a power supply, because
of an overclocked processor or because a computer is operating in an
environment with too much heat or humidity.
However, some capacitors prematurely fail due to
faulty work on the part of the manufacturer.
If you have a bad capacitor be sure to do research as
to the lifespan of other products made by your manufacturer.
Identifying bad capacitors
http://www.youtube.com/watch?v=ngA4k32jLGc
Capacitor replacement
http://www.youtube.com/watch?v=s0Pn2tEjY04
How to check a capacitor
http://www.youtube.com/watch?v=U4tnHA0phcc
Replacing a leaking capacitor
http://www.youtube.com/watch?v=s0Pn2tEjY04The device drivers for the hardware
are faulty or incompatible.
Could be a problem with the Hard
Drive or the Hard drives PCB
http://www.onepcbsolution.com/
There is a connection problem such
as a bad cable
Test all power and data leads that attach to your hard drive SATA
the leads from your MOTHERBOARD TO THE
HARD DRIVE make sure they have a
secure dust free connections and are
not faulty.
Although it would be very rare for
the sata lead to be faulty.
Make sure all leads that are attached to your drives
dvd\cd have secure connections and are not faulty
Computers need power and data to travel through
every working device and continue its cycle and have an end so any faulty leads
will end up with a computer error.
download it again... you can find it on torrent sites, but youll need to download utorrent 1st to obtain it.i cant tell you the name of the site but it has something to do with pirates and bays....
You haven't provided much info on the problem ?WARNING: Before you start
troubleshooting remember that you are dealing with electricity that can KILL.
http://www.kitchentablecomputers.com/static.php
- rules
Only work inside the computer case
when the power has been switched off and disconnected. Never open the power
source.
Some of the below steps
recommend removing physical parts within the computer.
While in the computer it is
highly recommend that you be aware of ESD and its potential hazards
Remove the memory modules from their
slots.
Take the
opportunity to clean the slots on the motherboards and the memory module
connectors.
Use compressed air to blow dust away
and clean contacts with a soft cloth.
Do not use a metallic vacuum cleaner
if it touches any component it may create a short and cause damage to the
motherboard or other components.
Do not use
solvent that may attract dust and never poke things like cotton buds in to
slots. lightly rub an alcohol (Methylated
Spirits) on a cloth not to hard let the alcohol do the work on the copper gold
or silver tabs and r
Allow the pins to dry.
They will air dry in a matter of
minutes
If reseating the memory did not
resolve the issue try swapping the location of the memory.
If you have only one stick of
memory in the computer try moving it to another slot and then boot the
computer.
Check the memory module and memory
slot contacts.
They are either copper tin or gold.
The colour will tell you which they
are.
Mixing tin and gold can result in
corrosion that prevents proper contact.
Look for any sign of physical damage
to the memory module, memory slots or the motherboard.
Reseat the memory modules.
You should hear an audible click
when they are in place.
Do not use too much force to reseat the memory
module in to the slot this can cause damage to the module, slot or motherboard.
hmn.. i would try it on another computer before tossing it out... i would also try to start up the pc with a cd on it and trying to boot from it just to see if windows is the cause of the problem. if it boots from the cd the it works.
You have press the NumLk key (number lock) and this changesthe right hand keys to a number pad.Press the NumLk key (also doubles as the ScrLk key to toggle the Number lock).it is near the F12 function key. When the NumLk has been enabled a LED light is turn on toindicate this function has been selected.b>
A webcam supplements communication with family and friends. It's often used for video chatting. But you could use your webcam to take pictures, as well. Make sure your webcam is connected to the USB port of your computer, installed appropriately, and the computer is on and ready. Navigate to the "Start" menu and type "webcam" (without quotes) in the Search field. If you've previously installed webcam software, the program should appear in the search results. Double-click the selection to launch the webcam application. From the webcam dialog, select the "Quick Capture" icon (the example is for Logitech software, but other applications have similar functions with different Position the camera and person or object that you want to photo capture. Select the desired resolution from the drop-down menu. Click "Take Photo" to take a photograph. Browse to the picture destination to view your photo. Now that your photo is stored on your computer, you can email or print it.
First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty. Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.