20 Most Recent
NetTV DTV-29XF3 29" TV - Page 6 Questions & Answers
Onn TV troubleshooting-cycling video Rd-Gn-Bl-Wh-Bk
Based on the information you provided, it sounds like your Onn TV is stuck in a boot loop, where it continuously cycles through a sequence of colors without progressing to the actual boot-up process. Here are some troubleshooting steps you can try:
- Power cycle the TV: Unplug the TV from the power source and wait for a minute before plugging it back in. Then try turning on the TV and see if it progresses past the cycling colors.
- Reset the TV: Check the manual to see if there is a reset button on the TV or a combination of button presses that can reset the TV to factory settings. Try resetting the TV and see if it resolves the issue.
- Check the power supply: Use a multimeter to test the voltage output of the power supply board to make sure it is within the specified range. If the voltage is outside of the specified range, then the power supply board may need to be replaced.
- Check the LED backlight: Use a digital oscilloscope to check the voltage output of the LED backlight driver board. If the voltage is unstable or missing, then the LED backlight driver board may need to be replaced.
- Check the T-Con board: Use a digital oscilloscope to check the signal output of the T-Con board. If the signal is unstable or missing, then the T-Con board may need to be replaced.
If none of these steps resolve the issue, then it may be necessary to contact Onn customer support for further assistance.
Sled-40fhd software download
I'm sorry, but I would need more information to assist you with your request. What is the brand and model of your TV? Additionally, what kind of software are you looking to download? Please provide as much detail as possible so I can better assist you.
My Dstv receiver model 65 is not responding to dstv remote control model B4, what should I do?
If your DStv receiver is not responding to your remote control, here are a few troubleshooting steps you can try:
- Check the batteries: Make sure that the batteries in your remote control are fresh and properly inserted. Weak batteries can cause the remote control to stop working.
- Reset the remote control: You can try to reset your remote control by removing the batteries, pressing any button for 5 seconds, and then reinserting the batteries.
- Clean the remote control: Sometimes, dust or dirt on the remote control's buttons can interfere with its functionality. Clean the buttons with a dry cloth or a slightly damp cloth to remove any buildup.
- Reset the DStv receiver: Try resetting your DStv receiver by unplugging it from the power source, waiting for 30 seconds, and then plugging it back in.
- Re-pair the remote control: If none of the above steps work, you can try re-pairing your remote control with the DStv receiver. To do this, press and hold the "Shift" and "TV" buttons on the remote control for 5 seconds, then enter the 4-digit code that corresponds to your DStv receiver.
If none of these steps resolve the issue, you may need to replace your remote control or contact DStv customer support for further assistance.
Hi, I'm looking for the remote code for a sinotec MD-001 XTREME MEDIA CENTRE
The remote code for the Sinotec MD-001 XTREME MEDIA CENTRE may vary depending on the brand of universal remote you have. You can try the following codes to see if they work with your remote:
If none of these codes work, you can also try using the auto-search function on your universal remote to find the correct code. Consult your universal remote's user manual for instructions on how to do this.
Why my soniq tv stuck on where says soniq when turn on wont go to next step
Onsce you try simple fixes such as unplugging the TV and after 30 seconds, plugging it back in you can try rebooting the router if such is connected to it. I just kill the power to the TV and the router, wait, and turn them back on from a power strip. If that doesn't work and you don't have weak batteries in the remote, the fix gets a lot more heady. That is, you can try, with no guarantee of success, to update the firmware. https://forums.whirlpool.net.au/archive/2418355
You may have to contact Soniq support if the page referred to above does not lead to your model.
Behringer B115 flashing lights on control panel
If the flashing lights on the control panel of your Behringer B115 persist after trying the basic steps, it could be indicative of a more technical issue. Here are a few additional steps you can take:
- Check the amplifier: The flashing lights on the control panel could be an indication that the amplifier is malfunctioning. You can try checking the amplifier by connecting the speaker to a different amplifier and seeing if the issue persists.
- Check the capacitors: Faulty capacitors can cause flashing lights on the control panel. You can try visually inspecting the capacitors on the circuit board for signs of bulging or leaking. If you find any faulty capacitors, they will need to be replaced.
- Check the power supply: The flashing lights could be a result of a power supply issue. You can try testing the power supply with a multimeter to see if it is functioning properly. If the power supply is faulty, it will need to be replaced.
- Check the circuit board: It is possible that there is a problem with the circuit board. You can try visually inspecting the circuit board for any signs of damage or loose connections.
Hello I received the BN96-51826A Main board power supply for un50tu7000fxza the television opens my leds work but I have no image is there something to do, a program or other
It's possible that the new main board power supply you received is defective or not compatible with your TV. You can try a few things to troubleshoot the issue:
- Double-check all cable connections and ensure they are secure.
- Check the TV's settings to ensure they are configured properly.
- Try resetting the TV to its default settings.
- If none of the above steps work, you may need to contact the manufacturer or a professional technician to diagnose and fix the issue.
It's also possible that the issue is not related to the main board power supply and may be caused by another component in your TV. A professional technician can help diagnose the issue if you are unable to resolve it on your own.
My pvr 2 shows stby on screen and footprint on tv
The "stby" message on your PVR 2 likely means that it is in standby mode. This can happen if you have turned it off, if there is an issue with the power supply, or if it is experiencing a technical issue.
The "footprint" message on your TV may indicate that the TV is not receiving a signal from the PVR 2. This can happen if the cables connecting the two devices are not properly plugged in, if the cables are damaged, or if there is an issue with the PVR 2 itself.
To resolve the issue, you can try the following:
- Check the power supply to the PVR 2 and ensure that it is properly connected and turned on.
- Check the cables connecting the PVR 2 to the TV and ensure that they are properly plugged in and undamaged.
- Try resetting the PVR 2 by unplugging it from the power source for a few minutes and then plugging it back in.
- If none of these steps work, contact your service provider or the manufacturer for further assistance.
Sleep timer shuts off picture but not the sound
It's possible that the power outage could have affected the TV's settings, including the sleep timer function. You may want to try resetting the TV to its default settings to see if that resolves the issue. To do this, you can usually find a "reset" or "factory reset" option in the TV's settings menu.
If resetting the TV doesn't work, it's possible that there is a software or firmware issue with the TV. In this case, you may need to contact Hisense customer support or bring the TV to a repair shop for further diagnosis and repair.
How to play movies on a fussion 32" TV with out a remote
If your Fussion 32" TV does not have any physical buttons on it to control playback, then you may need to get a replacement remote or a universal remote that can work with your TV.
However, some TV models have hidden buttons located on the sides or bottom of the screen that can be used to navigate through the menus and control playback. Check the TV manual to see if this is the case for your model.
Another option is to use a smartphone app that can function as a remote control for your TV. Search for apps in your device's app store that are compatible with your TV model.
If none of these options work for you, you may need to purchase a replacement remote specifically designed for your TV model.
How do I get picture as well as sound on ewtn when it in on locked on the clearview box
To unlock the Clearview box, you will need to locate the remote control for the box. Look for a button or key labeled "Lock" or "Parental Control" and press it to disable the lock. If you are unable to find the remote control, check the box itself for a physical lock switch or button.
Once the box is unlocked, you should be able to access the EWTN channel and get both picture and sound. If you are still having issues with the picture, make sure that the television is on the correct input or channel for the Clearview box. You may also want to check the cable connections between the box and the television to ensure they are secure.
I get the sound but not the picture because green lite is shining on locked I have satellite to get EWN How do I get the picture and sound together for ewtn
It sounds like your TV may be set to a channel that is locked or not available through your satellite subscription, which is why you can hear the sound but not see the picture. Here are some steps you can try to get the picture and sound together for EWTN:
- Check your satellite subscription: Make sure that your satellite subscription includes EWTN. You can check your subscription package or contact your satellite provider to confirm.
- Check your TV channel: Make sure that you have selected the correct channel for EWTN on your TV. You can refer to the channel guide that came with your satellite subscription or check online for the correct channel number.
- Check for parental controls or channel locks: Your TV may have parental controls or channel locks that are preventing you from accessing EWTN. Check your TV settings or parental control settings to make sure that EWTN is not blocked.
- Check your cable connections: Make sure that your TV is properly connected to your satellite receiver and that the cables are securely plugged in. You can also try unplugging and reconnecting the cables to make sure there is a secure connection.
If you have tried these steps and are still not able to get the picture and sound together for EWTN, you can contact your satellite provider for further assistance.
Masterlink V2 OS was working great for months via digital connection from DAW. Suddenly there's pops and crackles in the recordings, but not coming from the DAW. Help Please!
Pops and crackles in recordings can be caused by several factors, including issues with the audio interface, cables, or the digital connection. Here are some troubleshooting steps you can try to narrow down the problem:
- Check the cables: Ensure that all audio cables are properly plugged in and not damaged. Try swapping out the cables to see if the problem persists.
- Check the audio interface: Test the audio interface using different input sources and output devices to see if the pops and crackles still occur. If so, it may be a problem with the audio interface.
- Check the settings: Check the sample rate and buffer size settings in your DAW and the Masterlink V2 OS to ensure they match. Mismatched settings can cause pops and crackles.
- Check for interference: Move any electronic devices away from the audio interface and cables as they can cause interference.
- Update firmware and drivers: Check for any firmware or driver updates for the Masterlink V2 OS and your audio interface and update if necessary.
If none of these steps resolve the issue, it may be best to contact the manufacturer or a professional audio technician for further assistance.
DC Blue and PLUS reset ? remote lost, connect new but memory full
If you have lost your remote for your DC Blue and PLUS garage door motor and need to connect a new remote, but the memory is full, you will need to reset the motor to clear the memory before programming the new remote.
To reset the DC Blue and PLUS motor, follow these steps:
- Locate the reset button on the motor. It is usually located near the bottom of the motor and may be labeled "Reset" or "Learn".
- Press and hold the reset button for about 10 seconds until the LED light on the motor flashes rapidly.
- Release the reset button and wait for the LED light to turn off. This indicates that the motor has been reset and the memory has been cleared.
Once you have reset the motor, you can program your new remote by following the instructions in the manual. If the memory is still full and you are unable to program the new remote, you may need to delete some of the stored remotes from the motor's memory to make room for the new remote.
To delete stored remotes from the motor's memory, follow these steps:
- Press and hold the "Learn" button on the motor for about 10 seconds until the LED light starts flashing.
- Press the button on the remote you want to delete from the memory.
- Wait for the LED light on the motor to flash rapidly, indicating that the remote has been deleted from the memory.
Repeat these steps for each remote you want to delete from the memory until you have enough space to program your new remote.
If you are still having trouble programming your new remote or resetting the motor, you may need to contact a professional technician for assistance.
My car Ford Territory 2007 iCC unit problem
Unfortunately, if the ICC unit screen has turned white, it is likely that the unit has failed and needs to be replaced. If the car is still under warranty, you may be able to get a new ICC unit from the manufacturer or your local dealer. If not, you can look for a replacement unit online or at an auto parts store.
There is no power to the front panel
If you have replaced the circuit board and there is still no power to the front panel, there could be a few things causing the issue. Here are some things you can try:
- Check the power cord: Make sure the power cord is securely connected to both the TV and the wall outlet. You can also try plugging the TV into a different outlet to see if that solves the issue.
- Check the power supply: If the power cord is connected properly and the TV still isn't receiving power, there may be an issue with the power supply. Check the power supply for any visible damage or loose connections.
- Check the internal fuse: Some TVs have an internal fuse that can blow out, causing a loss of power. Check the owner's manual to see if your TV has an internal fuse, and how to check and replace it if necessary.
- Contact a professional: If none of the above solutions work, there may be a more serious issue with the TV that requires professional repair. Contact a qualified technician or the manufacturer for assistance.
Devant 50DTV700 & 50UHD 202 SERVICE MODE...
To enable the auto power on function on your Devant TV, you can try the following steps:
- Turn on your TV and go to the menu.
- Navigate to the "System" settings.
- Look for the "Power Management" option and select it.
- Look for the "Auto Power On" option and select it.
- Set the "Auto Power On" function to "On".
- Save your changes and exit the menu.
Once you have enabled the "Auto Power On" function, your TV should turn on automatically when it is plugged in after being turned off.
Original password for Phillips dvd player HTS3020/12
There is no specific original password for the Philips DVD player HTS3020/12. However, if you have set a password and forgotten it, you can try resetting the player to its default settings, which will erase any stored password.
To reset the player, follow these steps:
- Turn on the player.
- Press the "Home" button on the remote control.
- Select "Setup" and press "OK."
- Select "Reset" and press "OK."
- Select "OK" to confirm the reset.
After the reset, the player should be restored to its default settings and any previously set password will be erased.
Not finding what you are looking for?