20 Most Recent
NetTV DTV-29XF3 29" TV - Page 4 Questions & Answers
My proline W258CUQ remains dark, even if I try turning the brightness higher. Please help
It sounds like there may be an issue with the display on your Proline W258CUQ laptop. Here are a few troubleshooting steps you can try to identify and resolve the problem:
- Check the brightness settings: Make sure that the brightness is not set to the lowest level. You can adjust the brightness by pressing the Fn key along with the brightness key, usually represented by a sun icon.
- Check for external factors: If you are using your laptop outdoors or in a brightly lit room, the screen may appear dark due to the ambient lighting. Try moving to a dimly lit room or using a laptop screen hood to block out the light.
- Update the graphics driver: Check if there are any updates available for your laptop's graphics driver. You can do this by going to the manufacturer's website or using a third-party driver update software. Or vice versa, try to roll back the driver update.
- Restart the laptop: Sometimes a simple restart can fix the problem. Shut down your laptop, wait for a few minutes, and then turn it back on.
- Check the display cable: If the above steps do not work, it is possible that there may be an issue with the display cable. You may need to take the laptop to a technician to have it checked and repaired.
If none of these steps work, it may be best to contact the manufacturer or a qualified technician for further assistance.
How do I reset Onn Soundbar model 100069413 with or without using the remote control?
To reset your Onn Soundbar model 100069413, you can try the following steps:
- Using the remote control:
- Press and hold the "Volume Down" button and the "Source" button on the remote control simultaneously for about 5 seconds.
- The soundbar should turn off and back on, indicating that it has been reset to its default settings.
- Without using the remote control:
- Unplug the power cord from the soundbar and wait for about 30 seconds.
- While the power cord is unplugged, press and hold the "Power" button on the soundbar for about 5 seconds.
- Reconnect the power cord to the soundbar and turn it on.
If these steps do not work, you may need to refer to the user manual or contact the manufacturer for further assistance.
Does the flow sensor have anything to do with the sleep indicator?
You posted to the Category Televisions and obviously not that. There are over 10,000 categories to choose from.
All questions need FULL 'Make model (what is is)' as the first 3 words in every question. The site software should suggest the right category, or you can choose.
'flow sensor; 'timer', 'sleep indicator'? Water Bed? Dehimidifier? Hot tub? AC Unit? Water Cooled PC? Well Pump? Sump Pump?
It is all guesswork.
My pvi was working then it shut down... no power.... where is the internal fuse located?
I'm assuming you are referring to a Personal Video Recorder (PVR) device. The location of the internal fuse can vary depending on the make and model of the PVR. However, the internal fuse is usually located on the power supply board inside the PVR.
To locate the power supply board, you may need to open the PVR casing. The power supply board is typically a small circuit board located near the back of the PVR where the power cord is plugged in.
Once you have located the power supply board, visually inspect it for any signs of damage or burn marks. If you see any damage, it's possible that the fuse has blown and needs to be replaced. The fuse is a small cylindrical component with metal ends, and it's typically located near the power cord input.
If you're not comfortable opening the PVR casing or working with electronics, it's best to take your PVR to a qualified technician for repair.
What video format does element
This program is basically useless anymore. It says an upgrade is available but you cant get the upgrade to work, nor is there a way around the upgrade option. So the program is installed but stuck in the upgrade failed loop and useless.
I have optimum tv and
Hit the ellipsis upper right hand of the screen and select the cc box. Some channels (fox news) start up with it off
How do i reset my digital skyworyh tv to factory settings
The steps to reset a Digital Skyworth TV to factory settings may vary slightly depending on the model, but generally, the process involves the following:
- Press the "Menu" button on your remote control.
- Navigate to the "Settings" or "System" menu using the arrow keys.
- Look for an option that says "Factory Reset" or "Restore Default Settings" and select it.
- You may be prompted to enter a password. If you have not set a password before, try entering "0000" or "1234".
- Confirm that you want to reset the TV by selecting "Yes" or "Confirm".
- Wait for the TV to restart and go through the initial setup process, which may include scanning for channels and setting the language and time zone.
If you are having trouble finding the reset option, you can consult your TV's user manual or contact Digital Skyworth customer support for further assistance.
Rowe R-81 box and the arm will not swing over to play the record any ideas Thanks Tom
If your Rowe R-81 jukebox arm is not swinging over to play the record, here are a few things you can try:
- Check the power: Make sure the jukebox is plugged in and turned on. If it's not getting power, the arm won't be able to move.
- Check for mechanical obstructions: Check the mechanism that swings the arm over to make sure there are no obstructions blocking its movement. This could be something as simple as a piece of debris or dust, or it could be a more serious mechanical issue.
- Lubricate the mechanism: Over time, the mechanism that swings the arm can become stiff and difficult to move. Try lubricating the mechanism with a small amount of oil or grease to see if that helps.
- Check the belt: The mechanism that moves the arm may be driven by a belt, which can wear out or break over time. Check the belt to see if it's intact and properly tensioned. If it's worn or broken, it will need to be replaced.
- Seek professional assistance: If none of these steps work, it may be necessary to seek professional assistance. Jukeboxes can be complex machines, and attempting to repair them yourself could cause further damage. Consider contacting a professional jukebox repair service or a manufacturer's representative for assistance.
Rdr-gx257 says no title after recording
If your Sony RDR-GX257 DVD recorder says "no title" after recording, it could be due to a few different issues.
One possibility is that the disc was not finalized after recording, which can cause playback issues on other devices. To finalize the disc, you will need to access the disc menu on the DVD recorder and select the "finalize" option.
Another possibility is that the disc was not recorded properly, which can cause the "no title" error to appear. This can be caused by a variety of factors, including a dirty or damaged disc, a malfunctioning recorder, or incorrect settings on the recorder.
If you continue to experience issues after finalizing the disc and checking the recording settings, it may be necessary to seek assistance from a qualified technician or contact Sony customer support for further assistance.
Change picture size firetv
To change the picture size on Fire TV, follow these steps:
- Go to the Settings menu on your Fire TV.
- Select "Display & Sounds" or "Display & Sound" (depending on your Fire TV version).
- Scroll down to the "Display" section and select "Calibrate Display".
- Choose the option that matches the aspect ratio of your TV (e.g. 16:9 for most modern widescreen TVs).
- Follow the on-screen instructions to adjust the picture size and position until it fits your screen properly.
- Once you're satisfied with the changes, select "Save" to apply the new settings.
Alternatively, you can also adjust the picture size and zoom level directly from the video playback screen. While watching a video, press the "Options" button on your Fire TV remote and select "Picture Size" or "Zoom" to adjust the settings.
Note that the exact steps and menu options may vary depending on your Fire TV version and software version.
My Bruhm 32 curve tv is stuck in usb mode, and i dont have remote
If your Bruhm 32-inch curved TV is stuck in USB mode and you don't have a remote, there are a few different things you can try:
- Try using the buttons on the TV itself: Some TVs have buttons on the side or bottom of the screen that can be used to navigate menus and settings. Look for buttons labeled "menu," "input," or "source" and see if you can use them to switch to a different input or exit USB mode.
- Unplug the TV: Unplug the TV from the wall outlet for a few minutes, then plug it back in and turn it on. This can sometimes reset the TV and clear any issues with the USB mode.
- Obtain a replacement remote: If you don't have a remote, you may need to purchase a replacement. Check with the manufacturer or a retailer that sells Bruhm TVs to find a compatible remote.
- Use a universal remote: If you have a universal remote, you may be able to program it to work with your Bruhm TV. Consult the manual for your universal remote or contact the manufacturer for assistance in programming the remote.
If none of these steps work, you may need to contact Bruhm customer support for further assistance.
A220z1H01_Lcd right vartical barrs problem
It seems that you are experiencing an issue with vertical bars on your LCD screen. This problem can be caused by various factors, including hardware issues or software glitches.
Here are some steps you can try to troubleshoot and resolve the issue:
- Check the cables: Make sure that all cables connecting the LCD to the computer are securely attached and not damaged. Try disconnecting and reconnecting them to ensure a proper connection.
- Update drivers: Ensure that your graphics card drivers are up-to-date. You can check for driver updates on the manufacturer's website.
- Run a diagnostic test: Many LCD screens come with built-in diagnostic tests. You can run these tests to identify any hardware problems that may be causing the issue.
- Check for software issues: Try booting the computer in safe mode to determine if any software conflicts are causing the problem. If the bars disappear in safe mode, you may need to uninstall any recently installed software or update your operating system.
- Consider professional repair: If none of the above steps resolve the issue, it may be necessary to take your LCD to a professional repair service for further diagnosis and repair.
I hope these steps help you resolve the problem with your LCD screen.
Tv is displaying a white screen.
If the TV's clock is unable to match the internet's server.The TV can't download pictures and a white screen will show up instead.
I have an Olin HVBT-4100S Set Top Decoder.
Try doing a factory reset on it to reload the software and channels. This is from a different Olin model, but is worth a try.
Restore Factory Defaults
*WARNING* Restoring Factory Defaults will remove all saved channel information and settings.
All Scheduled recordings will be deleted. Please use with care.
Press the OK button to begin and then enter the password.
Press the OK button to confirm.
OR press the EXIT button to return to the previous screen without Restoring Defaults.
Another possibility is that you have inadvertently set it to show HD Channels only instead of All Channels. You could try disconnecting from the mains supply for 5 minutes and plug it back in, a SOFT Reset. More here
Not finding what you are looking for?