Hi Rosa
Depending on the severity of the broken lid....
I fix a lot of plastic items with either super glue or 2 part epoxy resin.
Then for reinforcement at the edges. I take a 2cm (aprox) piece of thin wire. Like a staple. Then heat it with the soldering iron. sliding back and forth until the wire is embedded into the plastic. even slightly covered over.
This often makes a cracked piece of plastic quite strong.
It may not look great but it might hold you over till you find a replacement
Good Luck
Here are some ideas....
Repairing plastic partsHow to Fix Broken or Cracked Plastic or Weld Plastic
Hello, the owners manual can be found at this link http://www.retrevo.com/support/Euro-Pro-EP91-Food-Processors-manual/id/926bh951/t/2/ or by going to this following page on the same site which offers the manual for free http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man if you are unable to see this link by clicking on it try copy and pasteing the link. If you have any issue at all obtaining this manual through these instructions that I have given please message me back and I will look further into provideing your manual for you. If you have any questions please message me those back as well. Please also remember when our chat has fully concluded to rate how this opinion has helped in you finding the instructions that you were looking for.Thank youRick
It is an Acrobat file (PDF). It opens in an Acrobat Reader. Download and install a free Acrobat Reader from Adobe if you don't have one. http://get.adobe.com/reader/
You can get replacement parts for the Euro-Pro Quad Blade by calling (800)798-7398. I got on line at Euro-Pro.com and sent in a complaint to costumer service about not being able to get a replacement lid for this WONDERFUL food processor. They sent me an order form for all parts on the Euro-Pro Food Processor and an 800 number to call and order the parts. The product is good if you are very gentle with the parts.
Look on the floor? It happens, don't laugh. Call the manufacturer or type the manufacturer name and model in the search bar. there should be s service center locator on one of the results you get.
HELLO THERE:
go to the manufactures website and there will be a printable manual there also you can google the make and model of this device and get good results there too ok.
please let me know how this goes for you and dont forget to rate this for me.
best regards
mike
(USN) RETIRED
My wife was given this unit from an elderly gentleman that was done trying to make it work.
I just fixed the same problem as above. Note - I do not have a manual for this unit.
True above about the bowl cover being locked in position but found the key to make it work is also the white lid to the left of the bowl cover. I was locking and unlocking this white lid with no results. Then I removed the bowl cover and found the white lid cover was loose and easily removed this white lid to inspect inside ( why this cover removes I have no clue).
Anyway I was able to snap the white cover firmly on and turn counter clockwise to lock in place ( six o’clock position), then after putting the bowl cover back on and snapping in place it works.
Note - I do not need to turn the white lid cover to install or remove the clear bowl cover, this could be because it looks like one of the clear tabs might be broken on the locking area of the clear bowl cover. If you have two tabs the same shape on the bowl cover you may need twist the white lid clockwise to install and remove the bowl cover and counter clockwise to lock in place so the unit works, but now that my white lid is snapped firmly in place it hardly moves with the force of both hands trying to turn it.
Hope this helps someone.
Good Luck !
Dan L. P.