20 Most Recent HP iPAQ hx2410 Pocket PC Questions & Answers

0helpful
1answer

I bought 2 used ipaq

why mess with old non supported dead products? why not buy 2 old smart phones, 1000x better. ok ask at HP , they need a good laugh today. IPAQ is dead every which way but sunday. no service provider supports it nor MS. nor HP, but do ask. welcome to real HP support (we are not) https://h30434.www3.hp.com/
8/8/2017 9:19:07 PM • HP iPAQ hx2410... • Answered on Aug 08, 2017
0helpful
1answer

How do i change the baud rate on the com port?

lesson 1: not all Uart chips are the same. many and vast chips can not do 115k buad. why not read the spec on this old long ago non supported device. or ask on real HP forum. this.>?>?> RS232 was my bag for many years, could make any work. Im sure this is in the manual , if I had a PC the book would be in my possession, at all times, why let luck rule here. the luck of find books on old products.>?? 168 page manual, i see, and no stinking index. wow. gota love that. no? rs232 . history, some apps set it others dont, for the who history of that. so if the APP dont that leave what, the OS, does it. end history. the manual stinks in this regard, http://h10032.www1.hp.com/ctg/Manual/c00267893.pdf il now read your manual to you (google found it in 1sec) IDENTIfying the Communications Port You can identify the virtual COM ports used to create a serial port connection. You may need to identify these COM ports for activities such as printing. Use the inbound COM port when other devices initiate a serial connection. Use the outbound COM port when you initiate a serial connection to another device. To identify the communications port: 1. From the Today screen, tap iPAQ Wireless > Bluetooth > Settings > Services tab. 2. Under Services, tap Serial Port and tap the Advanced... button. 3. Note the names of your inbound and outbound COM ports. 4. Tap OK (and no other hits in this manual this topic) if you run and APP and the exit it and see the port baud wrong you learned your APP is no good. the spec page in this manual skips RS232 chip totally. my guess is HP thinks its not needed. one other hard thing to learn? is RS232 is Not TTL 232, RS232 real uses +12 and -12vdc levels, it bet your DEVICE unstated uses TTL232.. 5v TTL signalling. RS-232 is for modems, and has lots more wires that just 3. so if its 3 wire, (aka, 2wire Rx /Tx) its not ever called RS232 its and Ad hoc , 232. per the wiki on that... why not use a real PC to do this why not then use the USB-232 adaptor dongles sold for $3 use that to communicate, I can show you how to do all that. using any PC running windows, and 1 extra USB port. 115k FIRST THE CHIP THERE MUST SUPPORT THIS. THE OS IS NEXT... (the book skips all these details) and the APP is last, the APP must support it and the OS must let the APP, set it, (some dont, even when hardware CAN) see? i could not even find a docucment on what are all the chips inside this relic pocket, pc. nada, or id have shown the data sheet too.
7/13/2017 2:30:02 PM • HP iPAQ hx2410... • Answered on Jul 13, 2017
0answers
0helpful
2answers

Hx2410 general wi-fi questions

Have you been able to connect through your router at home? I'd get that set up and running first. Then doing it on the road will merely be variations on a familiar theme. If you've tried at home but it hasn't worked, let us know something about your home network (what kind of router? using security/encryption?), and about what you've already tried so we can try to help.
11/15/2012 9:52:56 PM • HP iPAQ hx2410... • Answered on Nov 15, 2012
0helpful
1answer

HP Model 2410 iPAQ shuts

P Smith,

The OS may have got corrupted. Please reinstall the operating system. If that does not work then try to replace the battery with the same model as the present one as it may have become old and not holding charge (unlikely as it should then run while being charged on the cradle).

The corrupt OS is most likely the reason for the unit to malfunction.
1/11/2011 4:09:02 PM • HP iPAQ hx2410... • Answered on Jan 11, 2011
0answers
0helpful
2answers

How do you fix a touch screen that does not

Have you already performed a clean reset? You might know that it will restore your device to its factory settings, thus deleting everything you have installed, as well as your personal data and settings. So, it is strongly recommended to backup your data beforehand.
Anyway, to perform a clean reset, press and hold the Calendar, Power, and Messaging buttons, and, whilst keeping them pressed, press and hold the reset pin with the stylus pen. When your device restarts, release the buttons and the stylus pen from the reset pin.
Hope it works for you.
Cheers! Carlos
5/12/2010 12:32:41 PM • HP iPAQ hx2410... • Answered on May 12, 2010
0helpful
1answer

Will not save a location

contack maufact. reinstalled solfware
1/26/2010 6:05:14 PM • HP iPAQ hx2410... • Answered on Jan 26, 2010
0helpful
2answers

Start up problems

I had the same problem few years ago with my 3950

I kept it on the charger and it just kept doing that, and finaly died totaly.

I send it to repairs and found out it was a motherboard / chipset problem and the motherboard would need to be replaced.
4/30/2009 7:00:08 AM • HP iPAQ hx2410... • Answered on Apr 30, 2009
0helpful
1answer

When i reinstall the Bios on my Ipaq Hx2410 is fail.

I think you've know already (as an experienced technician) that opening h/w case won't solve anything..
The normal BIOS write is about 20 min (or more), longer than that it could be a problem with ActiveSync or your PC connections.
I'm afraid the ROM chip cannot re-restore because flashing basically format and write your BiosRom chip. Just pray that doing "hard reset" will turn your 'tiny' IpaQ to come alive.
4/21/2009 7:34:34 AM • HP iPAQ hx2410... • Answered on Apr 21, 2009
0helpful
1answer

Hx2410 won't connect with the computer, i'm put as guest

Its a ActiveSync that you have on your CD (bundled with u'r own IpaQ) that I think it's suite best, because I've once installed ActiveSync v4.3 (upgrading..), device connection is intermittent, and some syncronizing process fails.
4/21/2009 7:27:05 AM • HP iPAQ hx2410... • Answered on Apr 21, 2009
0helpful
2answers

Screen allignment hp ipaq hx2410 pocket pc

Try Realigning the Touch Screen
1. Tap Start > Settings > System tab > Screen.
2. Tap Align Screen and follow the instructions.

4/21/2009 7:21:25 AM • HP iPAQ hx2410... • Answered on Apr 21, 2009
0helpful
1answer

Hx2410 iPAQ broken after unsuccessful ROM upgrade

try to connact onther pc
1/5/2009 10:05:50 AM • HP iPAQ hx2410... • Answered on Jan 05, 2009
0helpful
1answer

Hx2410 Pocket PC

im still looking for some solutions
8/31/2008 4:17:41 PM • HP iPAQ hx2410... • Answered on Aug 31, 2008
0helpful
5answers

PDA will not display

is the battery fully charged.

has the phone dropped in water or some where else?
8/31/2008 12:51:06 PM • HP iPAQ hx2410... • Answered on Aug 31, 2008
0helpful
4answers

ROM FLASHING INTERUPTED

hi there,

is there any incident that you have not properly disconnect the unit into your PC, or have you upgraded the firmware unsuccessfully>>?
8/10/2008 4:44:47 AM • HP iPAQ hx2410... • Answered on Aug 10, 2008
0helpful
1answer

Ipaq hx2410

reinstall windows thats the best i've got...
5/22/2008 9:37:31 AM • HP iPAQ hx2410... • Answered on May 22, 2008
0helpful
1answer

Application Buttons

take the battery off for 15 seconds then put it back... try doing this atleast once a week. hoping this will help your problem. goodluck
1/28/2008 7:12:52 AM • HP iPAQ hx2410... • Answered on Jan 28, 2008
0helpful
2answers

Screen

Firstly this depends on whether the touch screen is cracked or just the outer layer is scratched badly.  If you see cracked glass or a liquid in the screen then the touch screen is broken. I have personally had this happen to one of my PDAs and after doing some research www.ipaqrepair.co.uk is the best bet for getting an ipaq repaired reliably.  However touch screens are very expensive.  I just looked at the site and a new screen for your PDA is $227.  I believe that is the price just for the part but not totally sure.  Your best bet would either be replace it yourself maybe buying a broken PDA of the same screen type on ebay and try to replace it yourself (which is very difficult) or just upgrade and buy a new PDA.  However no matter what happens I strongly suggest buying an aluminum case.  They are relatively cheap and will save you in the long run.  The invisible screen protectors are nice as well against scratching.  If you have any questions don't be afraid to contact me.  And by the way this is my first post so any feedback would be great reguardless. 

Curtis
10/31/2007 1:35:27 AM • HP iPAQ hx2410... • Answered on Oct 31, 2007
Not finding what you are looking for?
HP iPAQ hx2410 Pocket PC Logo

43 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

iPAQ HP

  • iPAQ HP

Most Popular Question

screen

  • Computers & Internet
Loading...