20 Most Recent Handspring Visor Prism Handheld Questions & Answers


Have lost my instructions for VisorGo CE0678 Model No: BTSTLO

Handspring Visor... • Answered on Jan 01, 2017


Put your bluetooth on your phone..
On the supertooth is a green button..press and hold to turn on for around 5 secs and watch for red and blue lights to flash..its pairing mode..now activate phone discoverable. .and pair..enjoy

Handspring Visor... • Answered on Feb 12, 2015


To recreate your problem, I have setup the my Visor with no username, placed it in the cradle, and connected the cradle via USB port.

In this configuration, I do receive the same error message that you reported. Multiple issues can cause this error to be generated.

1. Place your Prism in the blue charging cradle. Confirm that the green charging LED is flashing or illuminated (below the power button on the Prism). If the green LED is not lit, then reposition the Prism until it is. If the green LED still doesn't illuminate then check the cradle and it's connectors for dirt and debris. Also check the copper connectors on the Prism for dirt and debris.

2. Depress the grey HotSync button on the charging cradle. The error message will appear. Press OK to clear the error display. If nothing happens when you press the grey button you need to check the copper connectors in the blue cradle and the bottom edge of the Prism for dirt and debris.

3. Check the upper right hand corner of the Prism display for the HotSync application. If any characters appear on the top line, opposite the HotSync header, then that is your username. If no characters are present, then there is no username in the PDA.

Regardless of whether there is a username in the Prism, the HotSync should still be possible. Once you successfully connect the cradle to the USB port and successfully connect to the desktop computer, a popup window will ask you to Create or Select the HotSync User.

Do you receive this popup window on the PC?

If not, your setup or connection probably has an issue.

4. Look at the Prism HotSync screen. Underneath the HotSync icon in the center of the display is a Drop Down selection. The options are
a. Direct USB/Serial
b. IR to a PC/Handheld

Since you are using the cradle, you should select option a.

Once you have confirmed this setup, you need to confirm the desktop computer setup.

5. Be sure to start the HotSync Manager Application on the desktop computer.

6. Left Click on the desktop computer HotSync Icon in the system tray, and confirm that Local USB has a checkmark beside it.

7. Depress the grey HotSync button on the charging cradle again. If the HotSync popup still does not appear on the desktop computer, left click on the HotSync icon and uncheck Local, Modem Network and Infrared and then depress the HotSync Button again.


There is a hidden method in the Prism for deleting the user name.
  • Open the Memo application on your Prism.
  • Tap New.
  • Enter the ShortCut character.
  • Enter a period '.'
  • Enter the number 5.
Whether you entered the shortcut character, period and 5 correctly or not, the characters you've entered will disappear and the memo pad will remain blank. To see if you succeeded:
  1. Depress the Grey HotSync button on the cradle
  2. Your user name appears in the upper right corner of the screen: if it's blank, then your user name has been deleted. The next time you HotSync with this device, you will be asked to create a new user name.
Note: Creating a new User name, will not affect the data stored in the Prism, other than initializing the user name.

There is a freeware application to Change the user name on the Prism, but you would need to HotSync to the desktop or beam the application from another Palm PDA to install it.

Handspring Visor... • Answered on Jan 16, 2015


Factory Setting is usually 0000. In order to pair with your mobile (Max 8 phones), Depress green button on ST ONE R57 for 5 seconds approx. Light will flash red & blue, indicating that device is in pairing mode. Phone should have "Bluetooth" switched on (in settings) and search mode activated. Good luck

Handspring Visor... • Answered on Jul 31, 2014


If both items have Bluetooth! The pairing code is 0000 (4XZero)

Handspring Visor... • Answered on Jun 10, 2014


The code is 0000 (4xZero)

Handspring Visor... • Answered on Jun 07, 2014


press and hold the on button on speaker. when lights flash red and blue, search for the device with your phone. when found the enter the pin. the factory set pin is 0000

Handspring Visor... • Answered on Oct 01, 2012


Go to http://www.supertooth.net/down_light.html. It is almost the same

Handspring Visor... • Answered on May 26, 2012


Hi. I have already uploaded this for other members.

http://www.primarycomputers.co.uk/downloads/seal.pdf

Hope this helps

regards

Colin

Handspring Visor... • Answered on May 26, 2012


I have the instructions if you would like to give me your e-mail address i will send them to you

Handspring Visor... • Answered on Jan 15, 2011

Not finding what you are looking for?
Handspring Visor Prism Handheld Logo

81 questions posted

Ask a Question

Usually answered in minutes!

Top Handspring Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18626 Answers

Are you a Handspring Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Visor Handspring

  • Visor Handspring

Most Popular Question

pairing code fore sun visor handfree

  • Computers & Internet
Loading...