20 Most Recent Miele 24 in. G680 Built-in Dishwasher - Page 7 Questions & Answers

You need to reset to latch by hand - use a small straight slot and pop the lever back up to the open position

http://www.fixya.com/support/t3977519-miele_863_scvi_problem_started_intake

Consult user manual

Heating element may be defective

yes.

I suggest a rinse aid is required.

It's sounds like it needs a new board replacement.

can be anything from bad pump to short in wiring

If drain pump is constantly running, its most likely the relay on the pcb, or mechanical timer sticking if older models without pcb.

Could be a water valve problem

Is the rinse cycle working, you will see water pumped out and here water being pumped in for the rinse cycle.

Contact manufacturer for assistance. See information at link: https://www.miele.com.au/domestic/customer-support-21.htm Miele Customer Support We are here for you

Contact the manufacturer: Phone number or forms on web page: Customer Service Customer Support: 888-99-MIELE Service hours: Monday-Friday 8:00 am - 8:00 pm EST Saturday-Sunday Closed https://www.mieleusa.com/domestic/contact-us-45.htm https://www.manualslib.com/products/Miele-Diamond-G-5975-Scvi-3067117.html

Most likely something has blocked the motor, so it can not turn. That will blow fuse right away. If air passage is blocked, it could have burnt out the motor, that will cause blown fuse, too.