Tylo Sauna Heater Parts - Page 9 - Answered Questions & Fixed issues

...on then goes to service and shows 56 Bo means bypass operation which means the heater is being controlled by an outside control.

hayward pool heater service code Questions & Answers (with ...

https://www.fixya.com > Forum > Tags and also https://www.troublefreepool.com/threads/hayward-h150fdn-heater-error-code-56-or-sb-and-resetting-itself.213240/ Make model manual. Should give you trouble codes although they seem to use Letter codes. https://www.hayward-pool.com/assets/documents/pools/pdf/manuals/UniversalH-seriesLowNOx-HxxxFDOwners.pdf ..

The power cord may have become saturated with rain water.

Your heater may have an overheat safety shutoff device that is calibrated for 104 degrees.

circuit failure check and test the high speed relay and circuit board

This is the REAL answer if you see the 6cf error code it's to do with the plug.

I had the error code 6cf and it took hours to work out what was wrong and it was so simple... the pump unit needs to be plugged straight into the mains plug. Wont go away or work of your using an extension cable.

After I plugged it into the mains plug directly error code disappeared fully working.

Hope this helps people and saves them hours of dread thinking they bought a broken unit.

a flocking agent will do the job look for products with brand names such as pool clear , pond clear etc the chemical attracts the floating particles or mud/ algae takes them to the pool bottom to be sucked up with the cleaner or taken to the filter available from most pool supplies shops

The cloudiness could be suspended particles or algae. Use an algae k i l l er as recommended, then a flocculant (water clarifier) as recommended, then vacuum the pool bottom and run the filter overnight. After that check the ph, alkali level, chlorine level, and adjust as needed. That should do it.

Did you drain the pool? How to Vacuum Your Pool and Backwash the Filter Swimming Pool Blog How to vacuum to waste correctly How to Vacuum Pool to Direct Waste http://www.myperfectpool.com.au/backwash-pool-sand-filter-often.html Being in the south, we keep our pools clean and treated year round....check with the pool store where you get your chemicals and ask them about keeping out algee >>>>> Top 10 Algae Prevention Tips Leslie Poolapedia

call tech support

possible put multiport top on wrong

try back washing filter

if calling for heat try safety circuit

Question edited for clarity. Question moved from Larry's Computer category and moved to Pool Pumps. The company no longer make pumps as shown in Larry's link. They now sell inflatables for pools, and certainly didn't MAKE the pump. They did a deal and got a company to put their name on one. Google seems to think this is your pump. If not, it is time for a new one. Buy a brand leader like Grundfoss. https://images.inyopools.com/cloud/documents/pool-pump-owners-manual.pdf https://www.google.com/search?q=Air+Cloud+WT-6006+manual ..

Check the blower fuse.

possible bad temp sensor

Be carefull you probably got a stuck relay on the circuit board its gonna heat up to mush and melt the hoses dont let it higher then 103 turn it off

It should come off but maybe the cleaning cycle came on its anywhere from 2 to 5 hour running time

Post edited for clarity. Post moved from Cars to Pool and Spa. Contact the maker direct.

Pool and Spa Spare Parts - Waterco

https://www.waterco.ca > ... > Spare Parts > Pool & Spa

Downloads. Catalogs · Brochures · Manuals · Spare Parts · Pool & Spa · Water Treatment · Aquaculture. Pool & Spa - Spare Parts. Blowers.

if pump stops bad motor if low flow plugged filter