20 Most Recent HP StorageWorks Modular Smart Array 1000 Hard Drive Array - Page 3 Questions & Answers

If you are experiencing issues with HP Support Assistant, here are a few steps you can try to fix it:

1. Update HP Support Assistant: Make sure that you have the latest version of HP Support Assistant installed. To check for updates, open HP Support Assistant and click on "Settings" > "About".
2. Restart the HP Support Assistant Service: Press "Windows key + R" to open the Run dialog box. Type "services.msc" and press Enter. Scroll down and look for "HP Support Assistant Service", right-click it and select "Restart".
3. Clear the cache and temporary files: Open HP Support Assistant and click on "Settings" > "Health Analysis". Click on "Clear selected" to clear the cache and temporary files.
4. Run HP Support Assistant in compatibility mode: Right-click on the HP Support Assistant icon on your desktop, select "Properties" > "Compatibility" tab. Check the box for "Run this program in compatibility mode for" and select the previous version of Windows.
5. Reinstall HP Support Assistant: If none of the above steps work, try uninstalling and then reinstalling HP Support Assistant. To do this, go to "Control Panel" > "Programs and Features" > "HP Support Assistant" > "Uninstall".

If you continue to experience issues with HP Support Assistant, you can contact HP support for further assistance.

There could be several reasons why your HP laptop is not turning on and not charging even after installing a new power button board and DC in port. Here are a few possible causes and troubleshooting steps you can try: Battery: Even if the laptop is connected to the charger, if the battery is faulty or dead, the laptop may not turn on. Try removing the battery and plugging in the charger directly to the laptop. If the laptop turns on without the battery, then it's likely that the battery needs to be replaced. Charger: Check if the charger is working properly. You can try using another charger with the same voltage and amperage to see if the laptop starts charging. If the laptop starts charging with a different charger, then your original charger may be faulty. Power Jack: Make sure the power jack is properly connected to the motherboard. If it's loose or not properly seated, the laptop may not charge or turn on. You can try reseating the power jack or replacing it if it's damaged. Motherboard: If none of the above steps work, then the problem may be with the motherboard. A damaged or faulty motherboard can prevent the laptop from turning on or charging. In this case, you may need to take the laptop to a professional repair technician or consider replacing the motherboard. In summary, the laptop may not turn on even when connected to the charger if the battery is dead or faulty, the charger is faulty, the power jack is loose or damaged, or the motherboard is damaged. It's important to troubleshoot each of these components to identify the root cause of the issue.

It sounds like you have a faulty battery or the laptop has suffered a power surge. To resolve the issue, you can try a few things. First, try resetting the laptop by holding down the power button for 30 seconds. If that doesn't work, try replacing the battery with a new one. If the laptop still won't turn on, it's likely that you sustained a power surge in the DC port and will need to get it serviced at an HP authorized service center.

open cover and you will see the answer to your question. 2 AA batteries required use alkaline to a brain surgery easy to do.

Question edited for typos. Sounds like something not quite right. Did you remember to Save Out as you left to make the setting stick..

Question moved from Laundry Dryers to one of the laptop categories. All questions need 'make model (what it is)' and in the case of a laptop the Service Tag number. You also don't tell us what 'the units' are either. Printers are connected via USB to the Laptop. The socket with 3 or 4 prongs is likely the external mouse socket. It may even be the mains adapter socket. ..

If you have forgotten your password and do not have a password reset disk, there are a few options you can try to regain access to your computer. Here are some of the methods you can use:

1. Use the built-in administrator account: Windows has a hidden administrator account that can be used to reset your password. To access this account, restart your computer and press F8 before Windows starts. Select "Safe Mode with Command Prompt" and log in as the administrator. Then, open the command prompt and type "net user [username] *". Replace [username] with your account username and press Enter. Follow the prompts to create a new password.
2. Use a password reset tool: There are several password reset tools available online that can help you reset your password. One popular tool is called Ophcrack, which can be used to recover your password by cracking the password hash. You can download Ophcrack from its official website and create a bootable USB or CD to use on your computer.
3. Reinstall Windows: If you are unable to reset your password using the above methods, you can reinstall Windows. This will erase all data on your computer, so make sure to backup any important files before proceeding. To reinstall Windows, insert your Windows installation disc or USB and restart your computer. Follow the prompts to install Windows and create a new user account with a new password.

Note: These methods should only be used to reset a password on a computer that you own or have permission to access. Resetting someone else's password without their permission is *******.

The device may require a new battery to turn on if the problem is caused by a dead battery. You could try replacing the battery, or you could take the device to a repair shop to have it replaced if you can't find one. You may also need to perform a hard reset or reinstall the operating system if the issue is caused by software. However, it is essential to ensure that the battery is functional prior to attempting any software-related fixes. I believe you can get a similar one via https://amzn.to/3EvPtqr

A mains cable is $5.80 https://www.newegg.ca/c2g-6-ft-black-power/p/N82E16812196313?item=N82E16812196313 There are only 3 connections on that, live neutral and ground. The wire on the other end or the mains transformer has a single plug with live and neutral as shown here. Not sure where you are finding 7 wires? https://www.battdepot.com/ca/model/notebook+adapter/compaq/presario+cq56-200sg/ac19v90k3.aspx Don't start messing with the motherboard connection over $5.80. Head down to Goodwill, you find them for $2 complete. ..

Question edited to tidy up the written English. I have this issue on a wired Desktop computer that uses a plug in gadget that takes the internet from my basement rec room where the television and router is and sends it via the house wiring to the 3rd floor where the computer is. Put the App Speedtest on your smartphone and run it when the computer network drops out. My 50mbps internet drops to 11.6 or worse. Not sure why Bell Canada has this issue, but I notice my Internet is now labelled 'Century Link'.

English only on Fixya please. Ici la en Anglaise.

HP Photosmart 912 User Manual - ManualsLib

https://www.manualslib.com > ... > Digital Camera > 912 View and Download HP Photosmart 912 user manual online. Hewlett-Packard Digital Camera User's Guide. Photosmart 912 digital camera pdf manual download.

HP 912 Digital Camera - Hewlett-Packard

http://h10032.www1.hp.com > Manual > bpy60036 PDF Welcome to the HP 912 Digital Camera User's Guide. This guide will help you take high-quality pictures quickly and easily with your HP 912 digital camera.

If your HP CP4525 printer is hanging on every restart with the error code 49.FF03 device failure, it may indicate a problem with the printer's hardware or firmware. Here are some steps you can try to fix the problem:

1. Restart the printer: Try restarting the printer to see if the issue is resolved. To restart the printer, turn it off and unplug it from the power outlet. Wait a few minutes, then plug it back in and turn it on.
2. Check for firmware updates: Make sure that the printer has the latest firmware installed. You can check for updates on the HP website or through the printer's web-based interface.
3. Check for hardware issues: Check the printer for any visible damage or issues with the hardware. Make sure all the cables and connections are secure and not damaged.
4. Reset the printer: If the above steps do not help, you may need to try resetting the printer. To reset the printer, turn it off and unplug it from the power outlet. Then hold down the power button for 30 seconds and release it. Wait a few minutes, then plug the printer back in and turn it on.

If none of these steps help, you may need to contact HP or a technical support team for further assistance. It is also a good idea to check the documentation or manual that came with the printer for any troubleshoot

well that is simple, in concept the Bluetooth on this series has 2 kinds of ways. the most common is, Bt IS PART OF THE WIFI CARD AMAZING IS, THE FACT THAT THE HP, SERVICE GUIDE COVERS ALL THIS AT HP..COM, HP DOT COM. A COMPLEX URL, NO? I OWN 8540W So know them well the card BT is a seperate card here, narrow. and has its own socket, see them used on ebay, just by one . now the gotcha it has special cable so if your PC never had BT ,yes you need the cable too.. seen here clearly https://www.manualslib.com/manual/1123083/Hp-Elitebook-8470w.html?page=81&term=Bluetooth+Module&selected=1#manual

If the door of your HP Officejet J5783 printer is not closing properly, there may be a few possible causes for the issue. Here are some steps you can try to fix the problem:

1. Check for debris: Make sure there is no debris or foreign objects blocking the door from closing properly. Remove any debris or objects that may be causing the issue.
2. Check the hinges: Check the hinges of the door for any damage or looseness. If the hinges are damaged or loose, try tightening them or replacing them if necessary.
3. Check the alignment: Make sure that the door is properly aligned with the printer. If the door is not aligned properly, try adjusting the alignment.
4. Check the door latch: Check the door latch for any damage or looseness. If the door latch is damaged or loose, try tightening it or replacing it if necessary.
5. Check the printer software: Make sure that the printer software is up to date and that there are no conflicts with the door. You can check for updates on the HP website or through the printer's web-based interface.

If none of these steps help, you may need to contact HP or a technical support team for further assistance. It is also a good idea to check the documentation or manual that came with the printer for any troubleshooting tips or recommendations.

To download the Alexa app on a Windows 10 PC, you can follow these steps:

1. Open your web browser and go to the Amazon website.
2. Click on the "Account & Lists" drop-down menu in the top right corner of the page and select "Your Devices" from the list.
3. Click on the "Add Device" button and select "Alexa Devices" from the list.
4. Choose "Alexa App" from the options and click on the "Download" button.
5. The Alexa app will start downloading. Once the download is complete, click on the "Run" button to start the installation process.
6. Follow the prompts to complete the installation process.
7. Once the Alexa app is installed, you can launch it and link it to your Echo Dot by following the on-screen instructions.

Alternatively, you can also download the Alexa app from the Microsoft Store. To do this, follow these steps:

1. Open the Microsoft Store app on your Windows 10 PC.
2. Search for "Alexa app" in the search bar.
3. Click on the "Alexa" app from the search results and select "Get" to start the download.
4. Once the download is complete, the Alexa app will be installed on your PC and you can launch it and link it to your Echo Dot by following the on-screen instructions.

The error "Instruction referenced memory 0x40028e28 referenced memory at 0x00000000" may indicate that the program you are using is trying to access memory that is not allocated or has been corrupted. This can be caused by a variety of factors, including software conflicts, hardware issues, or malware. Here are some steps you can try to fix the problem:

1. Restart the device: Try restarting your device to see if the issue is resolved.
2. Check for updates: Make sure that all the software and drivers on your device are up to date. Installing any available updates may fix the issue.
3. Check for malware: Run a malware scan to check for any malicious software that may be causing the issue.
4. Check for hardware issues: Check for any hardware issues that may be causing the problem. This can include damaged or failing hardware components, such as the memory or hard drive.
5. Repair or reinstall the software: If the above steps do not help, you may need to try repairing or reinstalling the software that is causing the error. Make sure to follow the instructions provided by the manufacturer or technical support team to properly uninstall and reinstall the software.

If none of these steps help, you may need to contact a technical support team for further assistance. It is also a good idea to check the documentation or manual that came with the software or device for any troubleshooting tips or recommendations.

https://www.google.com/search?q=Driver+for+HP+DVDRAM+GT50N ..

use cmd option

It is unlikely that your HP LE1901w monitor has a password, as monitors do not typically have password protection. If you are unable to access the settings or menu on your monitor, it may be due to a different issue, such as a faulty control panel or a problem with the cable or connection to the computer. To troubleshoot this issue, you can try the following steps:

1. Check the connections between the monitor and the computer to ensure they are secure and functioning properly.
2. Try using a different cable or a different input on the monitor to see if the problem persists.
3. Check the monitor's control panel and buttons to see if there is any damage or if they are not functioning properly.
4. If the problem persists, you may need to contact the manufacturer or a qualified technician for assistance.

If you are unable to access the settings or menu on your monitor, you may want to consult the user manual or contact the manufacturer for further assistance.

If your HP z74 CRT monitor is not turning on, there could be several potential causes. Some common causes of power failure in CRT monitors include:

• A faulty power supply: The power supply is responsible for providing power to all the components of the monitor, so if it is not functioning properly, the monitor will not turn on. You can test the power supply by using a multimeter to measure the voltage at the output connectors. If the voltage is not within the expected range, the power supply may need to be replaced.
• A faulty flyback transformer: The flyback transformer is a critical component of a CRT monitor, as it converts the high voltage AC input from the power supply into the low voltage DC output required by the other components of the monitor. If the flyback transformer is faulty, the monitor will not turn on. You can test the flyback transformer by using a multimeter to measure the voltage at the output terminals. If the voltage is not within the expected range, the flyback transformer may need to be replaced.
• A faulty or blown fuse: The fuse is a safety device that protects the monitor from damage due to excessive current. If the fuse is blown, the monitor will not turn on. You can test the fuse by using a multimeter to measure the resistance across the fuse. If the resistance is very high or infinite, the fuse is blown and will need to be replaced.

To diagnose the specific cause of the power failure on your HP z74 CRT monitor, you may need to open the monitor and perform some basic tests using a multimeter. This will help you identify the specific problem and take the appropriate steps to fix it. It is important to note that working on electronic equipment can be dangerous, so if you are not familiar with electronics repair, it is best to seek the assistance of a qualified professional.