20 Most Recent
Canon P27Dh Calculator - Page 7 Questions & Answers
Hello, as soon as i turn on my canon imagepress c1 photocopier, i have this error message E000073-0001 how to solve it . thanks
The E000073-0001 error code on the Canon ImagePRESS C1 photocopier is related to a problem with the temperature sensor in the fuser unit. Here are some steps you can take to try to resolve this issue:
- Turn off the copier and unplug it from the power source. Allow it to cool down for a few minutes.
- Check the fuser unit for any visible signs of damage, such as wear or burn marks.
- Check the temperature sensor and its wiring for any signs of damage, such as frayed wires or broken connections.
- Reconnect any loose or disconnected wiring and ensure that the fuser unit is properly seated and connected.
- Power on the copier and see if the error code has cleared. If it hasn't, you may need to replace the fuser unit or the temperature sensor.
If you are not comfortable performing these steps or if the error code persists after attempting to troubleshoot the issue, it is recommended that you contact a professional technician or service provider who is experienced in repairing Canon photocopiers. They will be able to diagnose and fix the problem.
Canon ir 4570 error code 744-3030 What Can I do
Error code 744-3030 on a Canon IR 4570 indicates a problem with the toner hopper. Here are some steps you can take to try to resolve the issue:
- Turn off the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
- Check the toner: Open the toner hopper and check to make sure there is toner inside. If the toner is low, refill it.
- Check the toner hopper motor: The toner hopper motor may be malfunctioning, causing the error code. Check the motor to see if it is working properly. If it is not, it may need to be replaced.
- Check the toner hopper sensor: The toner hopper sensor may be dirty or malfunctioning, causing the error code. Clean the sensor and make sure it is working properly. If it is not, it may need to be replaced.
- Reset the printer: Reset the printer to clear any error codes. To do this, turn off the printer, press and hold the "1" and "9" buttons, and turn the printer back on. Release the buttons when the display shows "Initializing."
If the above steps do not resolve the issue, it may be necessary to contact a professional technician or Canon support for further assistance. They can help diagnose and fix the problem safely and effectively
Canon Imageprograf pro-2100 error EC1C-2036
It sounds like you may be experiencing a mechanical issue with the Canon Imageprograf Pro-2100. The error code EC1C-2036 is related to the lower drive nipe arm unit, which is responsible for moving the different components of the printer in order to produce prints. This error can be caused by foreign objects becoming stuck in the unit, or by the unit itself becoming worn out or damaged. To resolve the issue, you will need to first inspect the unit for any foreign objects, and if none are found, then you will need to replace the unit. If you are unable to locate the part or don't feel comfortable attempting a repair, then it is recommended that you contact a professional for assistance.
Iowa State canon TR 4520 I cannot get come on how can I fix it
The best way to reset your Canon printer is to find and hold the reset button on your printer. This usually consists of a small pinhole or recessed button located on the back or side of the printer, depending on the model. Press and hold the button for a few seconds until the printer resets itself.
Canon advance 4235 ir error code E000602-0101 problem
I'am making over $15k a month working online. I kept seeing how some people are able to earn a lot of money online, so I decided to look into it. I had luck to stumble upon something that totally changed my life. After 2 months of searching, last month I received a paycheck for $15376 for just working on the laptop for a few hours weekly. I was amazed how easy it was after I tried the copy below web...
www.join.hiring9.com
My Canon MX320 printer showing error occurred 5b00.i follow what YouTube said and now it's saying service mode. And the alarm light is still blanking. What I should do next??
The error message "error occurred 5B00" on a Canon MX320 printer typically indicates a problem with the waste ink absorber. The waste ink absorber is a component in the printer that absorbs excess ink that is expelled during cleaning and other maintenance operations. When the waste ink absorber becomes full, it can cause this error to occur.
Here are a few things you can try to troubleshoot the problem:
- Reset the printer: You can reset the printer by unplugging it from the power source, waiting a few minutes, and then plugging it back in.
- Service mode: You can enter the service mode by pressing the "Menu" button, then "Copying", then "Functions", then "Maintenance" and then "OK". Once in service mode, you can try to reset the waste ink counter.
- Clean the print head: Clean the print head to ensure that the printer is properly aligned and functioning correctly.
- Replace the waste ink absorber: If the waste ink absorber is full, it will need to be replaced.
How can you help me fix my Canon MX320? It won't work,the green and yellow light flashing and it's says 5b00 error occurred. Can you help me please!!!
- Turn off the printer and unplug the power cord.
- Open the printer cover and locate the ink absorber. It is a small, sponge-like pad that absorbs excess ink.
- Use a dry cloth to gently clean the ink absorber and the surrounding area.
- Replace the ink absorber with a new one. If you do not have a replacement ink absorber, you can purchase one from the Canon website or from a third-party supplier.
- Reinstall the printer cover and plug the printer back in.
- Turn the printer back on and test it to ensure that the error message has been cleared.
If you are not comfortable with the process or don't have the necessary replacement parts it's better to contact canon's customer support, they will guide you through the process and make sure that the issue is resolved.
Not finding what you are looking for?