20 Most Recent HP DeskJet 722c InkJet Printer Questions & Answers


Congratulations, it probably has the best inkjet printer mechanics in the world. Anyway. The contacts in the carriage are tiny rods on springs. They can loose contact both in front due to ink, or in the back due to softened springs or oxidized carriage PCB. You have to dismantle the carriage to strengthen the springs and to clean their footprints. Second version: probably the flex cable from the main board to the carriage got cracks in the conductor and needs replacement. It happens often with old or heavily used inkjets/design-jets.

C4557-80075 Cable - Carriage assembly flex cable - 40.3cm (15.9in) long

HP DeskJet 722c... | Answered on Apr 23, 2019


sounds like your priming station is full nothing you can do it would have to be replaced and that job will cost you it is a pain and time consuming

HP DeskJet 722c... | Answered on Aug 02, 2017


You need to get yourself a wireless print server to connect to your printer. This will allow your printer to connect to the wireless network and print over wifi.

Here's one I found on Amazon I think will do what you need:
Belkin 802 11g Wireless USB Print Server

HP DeskJet 722c... | Answered on Sep 11, 2016


first if its happening from few days than go for system restore - start - all programs - accessories - system tools - system restore.. select that date on which it worked fine.. or else add printer and install deskjet 990c and than try

HP DeskJet 722c... | Answered on Nov 17, 2014


To reset your printer, unplug from wall and computer. Wait 1 minute. Done. That won't fix your problem. If it prints fine off word processor, the printer is fine. Need some setup for labels.

HP DeskJet 722c... | Answered on Oct 13, 2014


Hi, You could either advertise it on an auction site for spares or your local shop.
You could advertise it "Free to collector" as spare only!!
If you didn't want to do either your local rubbish tip as they will take electrical appliances for no charge and if they can they will also recycle.
Here in the UK some charities will take un-wanted electrical appliances and will repair it or use parts to fix something else, they will then sell it on raising money for charity.
Or you could simply break it up and put it in the bin, with other household rubbish.
Hope this has give you a few ideas!!

HP DeskJet 722c... | Answered on Oct 05, 2014


I'm looking for one now, myself. I decided dig-out the HP 722C and try to get
it work with Windows7 64-Bit, now that I see there's a driver patch for some
of these older DeskJets. I already downloaded and applied the patch (See
message thread in the HP forum).
I'm now shopping for a 36-Pin Centronics Male to USB-A (Male) cable converter.
Be careful on the male Centronics plug - - - The one I'm looking for has 36
small square holes in the center. Do NOT just buy any coverter cable, as some
people report they couldn't get it to work (with Win7 64-Bit). It must state
it works with Win7 64-Bit or customer comments/reviews say it does.

There's another type of Centronics that has 36 contacts spaced closer together
without the 36 square holes. I have that cable and it must have come from an
old Epson dot-matrix printer I once had. It will not fit my HP 722C. I do
have a DB-25 to Centronics (36-Pin) cable I got from RS years ago. Now I
need to get the new cable.

HP DeskJet 722c... | Answered on Oct 02, 2012


HP forum solution here

64 bit Win 7 has been a challenge for many. In some cases you may be able to force the Vista 64 driver to work as well.

HP DeskJet 722c... | Answered on Mar 30, 2011


Yes but do not turn it on. wait until you reach the step in the installation process that asks the printer to be turned on

HP DeskJet 722c... | Answered on Nov 19, 2010


Hi,

Hp has not released the Windows 7 compatible drivers for Deskjet 722C.

There is workaround to this problem which is posted on HP support website. Click here to read the detailed steps

Hope this solves your problem. Thanks for using FixYa.

HP DeskJet 722c... | Answered on Jul 03, 2010


Try doing a self test by holding the paper feed button until the green light flashes. If it prints a test page then you should try a different printer cable. You can also clean the contact points on the cartridge (looks like gold dots) by using nail polish remover or surgical spirits.

HP DeskJet 722c... | Answered on Apr 13, 2010

Not finding what you are looking for?
HP DeskJet 722c InkJet Printer Logo

77 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6080 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DeskJet HP

  • DeskJet HP

Most Popular Question

am installing hp

  • Office Equipment & Supplies
Loading...