Top 20
HP PSC 1610 All-in-One Printer, Scanner, Copier Questions & Answers
My HP printer/copy/scaner makes a loud clunking noise when printing
Just unplug the power cord and remove the cartridge and clean it and also It require servicing open the cover and apply some lubricant oil on the steel rod inside in the printer on which print heads move ,that you can do with lubricant oil it will fix the problem otherwise show it service center.Have a nice day and do not forget to rate please...!
I get a vertical black
The first step is to clean the glass in the scanner tray with a mild cleaner. If that does not correct the line, then you could try a Duster spay can (CRC Duster or Ativa Cleaning Duster, etc.) to try to blow on the arm that moves under the glass. Be careful as the can should be used in short spurts or it will get very cold and stop spaying or freeze something in the machine.
If still no luck, try to see if this site will properly guide you:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&product=390315&lc=en&jumpid=reg_R1002_USEN
Good luck..................Pete
Received error message 0X07d54dd6 &
You must be using HP94 95.
Have you refill your cartridge at all?
If you did, gentely wipe out the cartridge circuit part with Q-tip (with bit of alcohol).
And wipe out the circuit part in the printer where cartridge goes in as well.
And try back.
Sometimes by having some dust or bit of ink make cartridge unreadable.
If you used brand new, do same thing to cartridge circuit part.
Otherwise, there got to be some circuit shot happen in printer.
For your reference, HP 1610 is not a new model and has not cause major problem.
Good practical and durability is good.
If you would like to save money, try refill kit by "ROADINK".
Not only they are easy, but also the printing quality is good.
For your better understanding pls check out my youtube video.
And will see how easy ink refill can be done.
I want to reversa an
If you would like to reverse an image--by reverse, I assume you mean flip horizontally--then you will need an image editor.
GIMP 2.0 is a powerful editor that you can get much more use from with t-shirt making. Download GIMP, select your image, right click and select flip horizontally.
Additionally, some operating systems will allow you to right click the image and select "flip horizontally" or "reverse".
I got a message "Remove and check color
you can try to remove and clean the chip contacts of the cartridge and or the cartridge housing. if it still doesnt work try resetting the printer ink counter.
Receive the message "no scan options" when
browse through your printer installation cd and go to setup
folder, then to destinations folder, and then right-click on the
destinations.msi (microsoft installer package) and then click on repair.
hope that helps
or
have you tried uninstalling and reinstalling the software?
hope that helps. ciao.
When I try printing from
I had the same problem on mu HP 1200 series all in one printer; I have two of the same printers.
I couldn't believe that the ink cartridge was the problem because BOTH cartridges, black and color were fairly new and giving good copy results;
Finally after taking the printer apart, checking transformer and gears, and cleaning up the cartridge faces... STILL the same problem;
I replaced the both black AND color cartridge with a brand new one, and it worked perfectly.
So now I am stuck with 2 cartridges, half-used, that the printer will not accept.
I am using the hp
sounds like a memory error. Try unpluging the printer power and the data cable and plug the power back to see if it makes any changes
Not finding what you are looking for?
