20 Most Recent
- Page 4 Questions & Answers
Install hp psc 1610 without disc
you can go to the hp website, www.hp.com, then after that search the model (psc 1610) then you can see a link there, so just click it then download a driver to install
Printer won't feed paper
Your paper is with excess of moisture. Try to keep the paper in a peper dryer, and do not use to leave the sheets not used in the printer, keep them in a dryer, or a dry place.
Can't print to 1410 after I upgraded to Leopard
I believe I had a similar problem. Try this:
Go to System Preferences > Print & Fax > '+'
Select the Epson 1410 and then under Print Using go to Select a driver to use the Epson Styls Phot 1410 - Gutenprint v5.1.3
I hope it helps.
HP paper jam
That is usually caused by the paper feed rollers being cover with paper dust. Take a clean cotton pad and alcohol and clean the rollers :turninig each roller as you clean it. if it has a rear dor, open it to get better access to the rollers.
Please remember to rate all users who assist you for free :)
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
hve u tried removing the paper jam from a proper place.hp has provided a door behind the printer to clear paper jam.open that door n check out 4 any paper part left out in it.wish u success
HP PSC 1610 All-in-One paper jam
ur printer paper feeder gears r jammed or misaligned. kindly get ur printer serviced from a good technician.dont worry its a normal problem.wish u success
Printer - colour cartridge will not print
mine is about 2 years old and does the same thing on certain paper try a different paper if that dont it then then try cleaning the ink heads with a q-tip and alcohol
My hp laserjet m 5035mfp showing error 50.00
Error 50.00 in HP Laserjet M5035MFP usually indicates a problem with the fuser unit. To resolve the issue, try these steps:
- Turn off the printer and unplug it from the power source.
- Wait for a minute, then plug it back in and turn it on.
- If the error persists, check the fuser unit for any visible damage or obstructions.
- If the fuser unit is damaged, it needs to be replaced.
If the issue persists after trying these steps, consider contacting HP support for further assistance.
Hp laserjet printer 3052 Scanner error 2 turn off and then turn onn
The "Scanner error 2" message on an HP LaserJet 3052 printer typically indicates a problem with the scanner assembly. To resolve this issue, you should turn off the printer, unplug it from the power source, and wait for a few minutes. Then plug the printer back in and turn it on again. This will often clear the error and restore normal operation of the scanner. If the error persists, you may need to contact HP technical support for further assistance.
1/19/2023 4:55:23 PM •
on Jan 19, 2023
Not finding what you are looking for?