20 Most Recent HP PSC 1610 All-in-One Printer, Scanner, Copier - Page 3 Questions & Answers

0helpful
1answer

Having problems printing the exclamation point is

chech you cartridges and use a genuine ones
4/3/2010 8:13:38 AM • HP PSC 1610... • Answered on Apr 03, 2010
0helpful
1answer

Printer will not complete initialization boot

Reset the product
The error message might disappear after you turn off the product and turn it on again. After you make any adjustments to the cartridges or the printhead, reset the product in order for the error message to clear completely. Follow these steps to reset the product.
  1. Press the Power button to turn off the product.
  2. Disconnect the power cord from the back of the product.
  3. Wait 30 seconds.
  4. Reconnect the power cord to the back of the product.
  5. Turn on the product by pressing the power button.
Check the product control panel display. If the error message disappears, you are done, and you do not need to remove, clean, and reinstall the printhead.

Regards,
Riztech
3/25/2010 3:19:40 AM • HP PSC 1610... • Answered on Mar 25, 2010
0helpful
1answer

Scanner failure

Sounds like you need to install, or reinstall the scanning software on your computer.
Select your OS on this page, and you should be able to get what you need: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=390315&#
3/21/2010 8:41:44 AM • HP PSC 1610... • Answered on Mar 21, 2010
0helpful
1answer

I have a hp psc 1610ie all-in-one printer. Had my

Hi,

First go to: HP PSC1610 Support

(You may want to bookmark this site for future reference.)

Click on Software & Driver Downloads.

Next select your Operating System.

On most you can either download just the driver or full feature software. (NOTE: Full feature files are very large, so be patient.)

I recommend choosing SAVE when you get to the download window and direct it to save the file to your Desktop.

When the download is complete, prepare your printer: Ink, Paper, Power ON, but make sure the USB cable is DISCONNECTED.

Run (double-click) the file that you downloaded. Follow the prompts and connect the USB cable when directed.

Thanks for using Fixya. If you should have any problems, just use the coment button.
3/16/2010 5:54:07 AM • HP PSC 1610... • Answered on Mar 16, 2010
0helpful
1answer

Can I scan a hard copy into Word from an HP PSC 1610?

the cd that came with your printer should have an OCR program included with it. if not, you can download a free trial of a known OCR program here. btw, OCR stands for Optical Character Recognition. it's the only way to scan documents to an editable form.
3/16/2010 12:32:58 AM • HP PSC 1610... • Answered on Mar 16, 2010
0helpful
1answer

Will not scan to my computer

Reinstall the driver software .
Hope this helps. Please rate my response.
Thanks.
Have a good day.

3/13/2010 5:43:04 AM • HP PSC 1610... • Answered on Mar 13, 2010
0helpful
1answer

How do you replace a cartrige in a hp1610 printer

Copy and paste the link below into your browser window and follow the on screen instructions.

Hope this helps.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00257066&tmp_task=useCategory&lc=en&dlc=en&cc=uk&lang=en&product=390315
3/8/2010 9:48:25 PM • HP PSC 1610... • Answered on Mar 08, 2010
0helpful
1answer

Hp psc 1610 what tri colour should i use

Hi
Your printer is not made for A3 it only for A4 so how are you getting a larger size than an A4 I not understand?
But if you need to print different sizes you need to get an Art or a paint program on your PC that what do, I use Paint Shop Pro to do my scanning on and I can print any size from 1 inch up to an A4.
If you ever think of getting art program of such then makes sure it has tools on it to scan then you can do all sort sizes.
Anyway I have put a PDF manual for your printer on my website for you to look at or download Hope it will be some help for you.

Click Link = http://www.4all2sell.com/pdf/hp-User-Guide-for-1600-1608-1610-1610v-1610xi-1613.pdf

You will need a adobe reader to see this file If you not got an Pdf reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

2/28/2010 8:15:02 PM • HP PSC 1610... • Answered on Feb 28, 2010
0helpful
2answers
0helpful
1answer

Paper Jam, paper feed issues

dear sir good day this printer have a common problem in the separation pad part and it need to simply replace ... so please take your printer to the tech company to replace it for you or buy it from it ((mention the printer model for the co.)) and download the service manual from the printer manf. site and do simply install the spare part and it'll work thank you
1/8/2010 9:54:30 AM • HP PSC 1610... • Answered on Jan 08, 2010
0helpful
3answers

Printer error

Just had this problem myself on my HP PSC 1610 All in one. After some fiddling, I found out that the power connector in the back was not fully inserted and must have slid out a little over time and with movement. After pushing it the whole way in, it started up fine and didn't give the error.

To make sure that was in fact the problem, I pulled the connector out slightly and started it up to find it gave me the error again. Then pushed it in the whole way, and it started up fine with no error.

Hopefully this works for others as well.
1/2/2010 6:50:56 PM • HP PSC 1610... • Answered on Jan 02, 2010
0helpful
1answer

My printer prints pages

The print job properties screens vary depending upon your OS and the version of your printer software. When you click "Print..." from the File menu in an application, the current job properties come up. You need to look for a box that you can tick or un-tick that has to do with reversing the print order of the resulting pages.
12/12/2009 3:41:14 PM • HP PSC 1610... • Answered on Dec 12, 2009
0helpful
1answer

I have lost the disk to the printer and I need to reinstall

go to hp.com support downloads, enter model number then operating system get the full version and then re install..also, plug your all in one directly into the power outlet.
here's that link
11/29/2009 5:58:22 PM • HP PSC 1610... • Answered on Nov 29, 2009
0helpful
1answer

Will scan but will not print

Insert CD prog/CompleteUninstall/Restart/install Save any docs you have not backup!
11/16/2009 1:06:46 AM • HP PSC 1610... • Answered on Nov 16, 2009
0helpful
1answer

How to install hp psc 1610 scanner

Click on the Link to download the driver :

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=390315&lc=en&cc=us&dlc=en&lang=en&cc=us

Select your OS;
Select the Full feature Driver;
Click on Download ;
Save to your desktop;
and then run the software;

Remember do not connect the USB cable until it ask you to do so .

Regards
Soumajit
10/11/2009 9:27:54 PM • HP PSC 1610... • Answered on Oct 11, 2009
0helpful
1answer

When i want to scan it says there is no

Yes friend, you have to install the drivers for this scanner. There must be a CD that came with it. Insert it into the drive and let it run. It will install the drivers. The you connect the scanner. Windows will then detect the scanner and load its drivers. After that you run its prog and you will be able to scan.
9/21/2009 5:21:55 PM • HP PSC 1610... • Answered on Sep 21, 2009
Not finding what you are looking for?
Office Equipment & Supplies Logo

90 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4362 Answers

Ben Johnson

Level 3 Expert

686 Answers

Cindy Wells

Level 3 Expert

6587 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

will hp 96 work hp 1610

  • Office Equipment & Supplies
Loading...