20 Most Recent HP LaserJet 1010 Printer Questions & Answers

In the Attention state, the Attention light is blinking and the Go and Ready lights are off. This state can be reached in the following circumstances:

● Paper tray is empty
● Door open
● Toner Cartridge Missing
● Paper jam/ Tray Misfeed

Pressing Go attempts to reset after a jam is cleared or is ignored in the other error cases. It may be necessary to clear the error manually and press Go or close the top cover. If the error still persists, the device will return to the Attention state.

The LJ1010 product series does not have paper out sensors. When the printer is in an Attention state because the paper tray is empty, the user must reload paper and press Go.

HP LaserJet 1010... | Answered on Jul 01, 2020

There are 2 cause for this problem
1st possible cause is the fuser ( either resistance doesn't go to correct temperature, or temperature sensor is damaged and doesn't read the correct temp )
2nd formatter board needs to be replaced or the main chip needs to be replaced

HP LaserJet 1010... | Answered on May 22, 2019

Try a hard reset of printer and/or reinstall the software, Check cartridges for ink and operation.

HP LaserJet 1010... | Answered on Dec 02, 2018

buy the cilp or senons

HP LaserJet 1010... | Answered on Oct 19, 2018

Try this link


HP LaserJet 1010... | Answered on Sep 24, 2018

im kosova drvers hp laserjet 1010 pleas

HP LaserJet 1010... | Answered on May 02, 2018

Try disconnecting power (not just shutting it off) and data input. Reconnect power and start over again. Something else to check: Look at device status. There may be documents jammed up in queue. I had to abandon my 1010 when upgrading to Windows 10; there was no compatible driver!

HP LaserJet 1010... | Answered on Mar 18, 2017

ijust solved this issue

WHOA ...

my printer is HP 1020,, and i was printing a huge number of sheets, which USED TO GET STUCK IN AGAGIN AN AGIAN... coz, i was using a low quality damned paper..

now,, it began to gave error ,tht either the front cover door not closed , or its toner cartridge missing.

Well,, simple solution for me was (which is basic i think)

>> Remove the metallic plate on the back of the printer
>>there you 'll find , on the right side, near the socket for poer cable, a "lever" like thing, thats the lever for the "barrier" between the SENSOR... move it and u'll get an idea..
>> if its jammed ,, then free it..
(mine was stuck into dont know wht, and i freed it, and all is fine)

>> if spring adjusment is wrong, correst it(you may get idea by moving it again n again, whether it comes bbacl to its orgignal position or not...

> remore the tonor cartidge and insert it back while looking on the lever movements.... and you ll get whats the matter with it..

PLEASE note it,,, that i think,, the sensors are NEVER damaged !!! mind it.....my knowlegde says , sensors are hardly damaged ..

-----Adios.... Tauseem Omer...Ravian Kemcolian.

HP LaserJet 1010... | Answered on Jan 02, 2017

Not supported, purchase a new printer. This is a home printer, never intended for server environments. This is a host based printer and has no internal PCL board to convert print stream from current windows.

HP LaserJet 1010... | Answered on Dec 01, 2016

Try a different cartridge, blank horizontal would point towards a possible drum issue. Does the defect repeat down the page?

HP LaserJet 1010... | Answered on Sep 14, 2016

clutch unit problem .You should service

HP LaserJet 1010... | Answered on Sep 09, 2016

Fixya does not sell driver software.

HP LaserJet 1010... | Answered on Aug 15, 2016

Check your toner savings settings and adjust it accordingly.You may also experiment with the right kind of paper.
Regards, Mike.

HP LaserJet 1010... | Answered on Apr 07, 2016

Means that your cartridge is still functional but of older date. HP warns because the age of cartridge may negatively impact print quality. It is just annoyance, you should print without any problems. Regards, Mike

HP LaserJet 1010... | Answered on Apr 07, 2016

put hp Genuine Cartridge

HP LaserJet 1010... | Answered on Apr 04, 2016

check pressure spring
lubricate fuser under film
ensure well assembling

HP LaserJet 1010... | Answered on Nov 15, 2015

In my opinion it might be the lsu unit , or the high power supply is not having a proper contact on the cartridge

HP LaserJet 1010... | Answered on Sep 10, 2015

Not finding what you are looking for?
HP LaserJet 1010 Printer Logo

334 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6163 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

hp lase printer 1010 driver

  • Office Equipment & Supplies