20 Most Recent HP LaserJet 2430 Printer - Page 7 Questions & Answers

the change the power borad

Check for bad cartridge, or out of paper, possible small piece of per still jammed. Unhook the usb and see if you can print a manual test, usually depress the one of the buttons on top will print an engine test...

Usually a failed formatter is the problem on smaller printers where they will not come to ready. Try disconnecting any data cables going from your computer to your printer and restart. If it comes to ready, you might have a corrupted print job stuck in the print spooler. If it does not come to ready when not connected to a computer then the formatter is done.

49=Firmware error.......... Recycle the printer power (off/on). Test. Switch off then disconnect all printer cables. Recycle the printer power (off/on). Check Err. Switch off and Reboot PC. Connect all and test. Try another app to print from. Try print a different file.

The fuser may need renewal. This is the 'heated roller' that melts the toner powder into the paper fibers. A techie needs to check and renew.

problema 49.38.07 color LaserJet cp5525

just happend, today, yesterday was ok, same setup? or just got this from a garage sale and ... or found it or barrowed it or >? tell the story please. no PC stated no OS stated (windows what?) to run a printer on USB the printer needs to be reset first. to USB mode, this is covered in the manual, lost that? the USB port needs to be working , try them all/? the HP software needs to be loaded too. omg its 14 years old today. click software and then click change. then pick your UNSTATED OS,in the huge list of operating systems this printer supports even up to w10 https://support.hp.com/us-en/product/hp-laserjet-4350-printer-series/412160/model/412162/manuals

that means it needs service ask for help at real HP.com here. free to ask and best way to get help, DIRECTLY. https://h30434.www3.hp.com/

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwijhtCt-eXWAhVBJMAKHbtDBFkQtwIIJTAA&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DlqG_nmi3vC4&usg=AOvVaw2a7GM7wADfDTvveUPHELg0

Go to your menu and pick that cassette out and make sure it is set to the proper size envelope. ten to one it is not os it shows a jam cause it is looking for another size.

optical unit is defective: Reconnect the connectors of the laser driver pca (j501) and the dc controller pca (j108, j109). If the problem is not solved replace the product. Per the service manual

printer error 58 3 HP LaserJet 4100 Service Manual Page 217

Hello, P{lease visit the following link on the HP website for suggestions on how to fix this issue. error E3 on my HP laserjet M1132 MFP printer Good Luck! Rich Lilja

Please restate your answer in the form of a question.

take printer outside of building pull out toner cartridge and drum carerfully Spray inside of printer to get rid of split extra toner with a can of compressed air - usually available from an electronic supply shops Check the drum has no tone split on it . Put drum and toner cartridge back into the printer

The ink level in the color cartridge has three different colors in it. You may need a new cartridge. Magenta is usually the first to go out.

Book says that it is the cyan drum drive assembly that needs replacing. Part number RG5-7723-000CN. DO NOT attempt to do it yourself. A tech needs to do it.