Top 10 HP PSC 1510 All-In-One InkJet Printer Questions & Answers

Hi,

 

Tri this link

 

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=428800&lc=en&cc=us&dlc=en&submit.y=10&submit.x=13&lang=en&cc=us

 

Don't forget to rate me "Solved".

Here is HP's answer to your question




http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00473778&lc
=en&cc=us&dlc=en&product=428800&lang=en

A lot of HP printers print a page to enable the print head alignment and calabration. This normally orcurs when a cartridge has been changed. If the alignment page fails then it will reprint alignment page until it can align.

So, you need to get that page it prints and place it on the glass and press scan, then it will complete alignment and be ready to rock.

See Here

Cheers

Yes the download are the same for all the models..this is the link to download the driver for vista...

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&cc=us&dlc=en&softwareitem=mp-37852-1&os=219&product=428800&

I hope this helps
**Please rate accordingly**
Thank You
Computerrep

what happens whenever you are trying to scan.... any error message or any error number?

try scanning from the printer to the computer using the scan to option on the front panel of the printer.

try scanning from hp solution center installed in your computer.

try scanning from mspaint. to do so, open paint and click on "file-->from scanners and camera".

how did you installed the driver. have you got the correct cd to install the printer in windows vista???

if not that may be the problem. the printer can print and copy well as you are having the drivers which will work in win vista. but for the scanning functionality you need to get the cd to install the printer in windows vista. you can download it online.

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47767-1&lc=en&cc=us&dlc=en&product=428800&os=2093&lang=en

the above link will help yu to download the win vista software and drivers for this particular printer.

Thanks and regards
Agnel

i lost the software of psc 1500 all-in-one can you help me?

Right click on setup.exe. Properties -> Compatibility -> Run this program in compatibility mode for: Windows XP

Hello,

You can approach this a few ways:

Cleanup A Problem Setup

• It may be as simple as inserting the original disc that came with the printer.
  If you don't have the disc, it may be included in the download found at the following link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-64285-1&lc=en&dlc=en&cc=us&lang=en&os=228&product=3177566
• As an alternate, you can find info to cleanup this error at the following link:
  http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=nps05679

An additional possibilities if the above info doesn't do the trick:

Remove PhotoGallery (you can reinstall it afterwards if you use it):

• Check to see if you can find PhotoGallery in the ADD/REMOVE programs list (in START menu / CONTROL PANEL). If you use Windows Vista this will be called Programs And Features.
• If it is listed, click on it then click on the UNINSTALL button or link (either to the right or near top of the window).
• Once removed, shut down the computer (not RESTART), wait 20 seconds, then power back up.
• The errors should be gone

If the problem persists, try the following:

• Download the Windows Installer CleanUp Utility which is free from here (about 1/3 down the page for the download link):
  http://support.microsoft.com/?kbid=290301
• Install the utility
• Run the cleanup utility (usually found on the START / (ALL) PROGRAMS menu).
• Scroll down until you see 'PhotoGallery'
• Select Remove
• Shut down the computer (not RESTART), wait 20 seconds, then power back up.

Hope this helps out,

Chris

You should have recieved software with the printer to do this, Look in the Hewlett-packard folder in the programs menu. It might be listed as HP Director. From there you should choose scan to as the option, one of the choices should be "to Fax".

This may be difficult if you just leave the color slot open. Some printers recognize that it is empty. Most times you can bypass this by placing the old cartridge back into the unit and it will think it is a new one.
Go to the printer properties and select black and white or grey scale.