20 Most Recent
HP DeskJet 3745 Printer - Page 8 Questions & Answers
I need a driver of hp deskjet3745 for windows7
here is the site just download it.. and install it...
hope it can help you...
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=372336&prodTypeId=18972&prodSeriesId=406455&swLang=8&taskId=135&swEnvOID=228
Can't access toolbox for printer
If you have done so before and thus are sure you are doing so correctly than the most likely issue is driver corruption.
Uninstalling and then reinstalling the printer drivers will probably correct your problem.
If you can't find your printer's utility/drivers disk that came with your printer, a quick visit to the support site for the printer's manufacturer will allow you to download them. You may want to do that any way as newer drivers might be available.
Light blinks and do not stop.
1. check to see if you have cleared the printer Que of all documents ( that is you have canceled all print documents
2. you could have a bad sensor in the printer that is not functional and is sending a printer signal or a improper circuit signal which the processor is triggering the print signal.
My HP Printer 3745 does not get power supply or turn on.
Well, since the adapter does not work, you have nothing to lose by trying to open the case, either by forcibly prying it open, or by taking a fine-tooth saw, and carefully cutting through the plastic case, to determine the cause of the rattle.
It won't print
plz reinstall your printer, if the problem is not solved then try with a new usb slot and change the usb port also. if problem is still there then scan your pc for viruses with updated anti-viurse software.
I am not able to fix the 3 pin wire into my
Buy an adapter cable that has a USB end on it and plug it into your USB port instead of your printer port. You can find this cable at any store selling electronics. Try WalMart or a local computer store.
It doesn't power
Check the power cord from the outlet if it is properly plug in and also check the power cord connection in the back of the printer and be sure that it is properly connected. See if it works.
Want to re-install unit, CD Installer has been
Hi,
Even if you do not have CD Installer, that's alright. Hp do have an option where you could go to their website and download all the driver's without any cost. If you wish, you could also prepare a CD Installer by burning the Driver's in a disc ( Only for personal use ).
The link to download drivers is :-
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=372335&lc=en&cc=us&dlc=en
Select your O.S ( Operating System ) like Windows Vista, 98 or so.
Save the files on the desktop in a Single Folder. Double click those to install in your PC/Notebook.
Let me know, if need further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Printer shows i have half full ink,but when i
i think there is a prblem about the ink cartridge. the noozle maybe it doesnt flow the ink or maybe you filled the cartridge too much of ink. try a new cartridge cartridge but before that try to clean the noozle of your ink cartridge.. - **wanski cebu**
The green light is blinking constantly and the printer won't print
Often happens HP cartridges to overheat.In that case the printer not recognize it and the green lamp blinking constantly.In most case only one of both cartridges defective and need to be replaced.But how to know which one?
Here's how: Open cover, put out color cartridge then close cover.If blinking stops replace color cartridge.If blinking continues put out black cartridge and put in color.If blinking stops replace black cartridge, if not stop replace both cartridges.
My pages are printed mirrorwise
you need to chang the settings for the drivers.
Click on start and then click on printers and faxes.
Right click on the printer icon and then click on properties. turn off the mirror image from there (advance or feature tab)
If you could not locate that option there, then click on printer prefrences and check for the option
Want to install in my computer
Disconnect printer from computer
Install the software from the CD-ROM that came with printer or download the software from support.hp.com.
Make sure printer is on.
Connect printer to computer when prompted by software install or when finished installing.
If this helps, please vote for this solution.
Not finding what you are looking for?