20 Most Recent HP PSC 2210 All-In-One InkJet Printer - Page 4 Questions & Answers

Hi kennthbray
There are three different models of your device available at HP's . Select the correct one and download the right OS before download . Here is an example :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=79499&lc=en&cc=us&dlc=en&lang=en&cc=us
But go first here to select the correct device : http://www8.hp.com/us/en/support-drivers.html
Best regards ,
fanaudi .

have the same problem with my hp 2110 aio . sorry no solution yet .
hope some one can help us

make sure that you inserted the ink correctly

Try using the HP Print Diagnostic Utility in Windows.


If you need more help post back!
Thumbs and testimonial are welcome!

bypass the alignment by press &hold setup button and press option button

Hi
I have had a look in the manual myself for you but not see any F4 there.
I have put a PDF files on my website for you to download.

Just click on the links it will download for you.

Click LINK= http://www.4all2sell.com/pdf/HP-PSC-2210-2210v-2210xi-Manual.pdf

You will need a adobe reader to see this file If you not got an PDF reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Hi

This is a common problem with these models. Any ways this is a problem with the cable connecting from logic board to the scanner assy. replacement is the best solution

hello

go to this link -- select the OS you require and download the drivers -- this will work for you
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=ca&lang=en&product=79499&




hope this hleps !

HP PSC 2100 series

HP PSC 2200 series
Press and hold the Setup button, and then press Options (or Copy Options ).

Please follow the sequence below:
Unplug the device from the computer.
From Control Panel->Ad Remove Progs uninstall the device.
Reboot the computer.
Reinstall the device.
Plug in the device and allow Windows to auto detect the device and load its drivers.
Use the program provided by HP to scan.
And cheers.

Please provide more details.
What exactly happens when you try to print?
Is there any error messages or blinking LEDs?

make sure its not the cartridges that are electrically dead causing the error

Here's the tutorial from HP, click HERE, and follow the instructions.
Note: Make sure your printer is turned on and connected to your computer. You also need to have the HP Softwares installed on your computer.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

HP service bulletin

http://goo.gl/G2PuF

Hi,

The problem could be that the black colored cartridge is low in ink, you may need to replace your black cartridge, but if you just did that, you can try reset your printer by following this procedure to reset it,

1. Without turning the unit off, unplug the power cord from the back of the product.
2. Press and hold # and 6 keys.
3. While holding those keys plug the power cord back in.
4. Wait until the screen goes blank before you release those keys.
5. Follow on printer screen instructions.This should fix the problem.

Sometimes it can be due to failure of the printer head, failure of ink catridges. In some cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.

Please review the 'terms' of use page for full explanation of fees associated with this site.

Thumb nail ... You can have a Expert call you for about $30.00 ... you can chat on line for about $20.00, you can ask a question in the paid section for another amount, you can subscribe on a monthly basis and ask lots of questions for another price ... or you can ask free questions such as you have here, for no fee.

This site is powered by volunteer question answering people (just like me) working when they want from our homes offices and shops ... taking the questions we want to answer. If you pay for the service, your question will be directed to a Expert who is currently on line and your question will remain at the top of the listing until it is answered. In the free section, your question may or may not be caught before it falls below the first couple of pages. Some people go looking for specific types of questions, as a rule, I don't.

When you ask your question please be brief but specific. Please post your question under an appropriate section. State what if anything you have done to correct the problem. Good questions get good answers at FixYa.com

Feel free to peruse my profile - click on my (or any other Expert) name to get a lot of details on questions I have answered in the past.

Thank you for using FixYa.com today.

The drivers for all HP printers are available on their website for free download.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=79499&lc=en&cc=us&dlc=en&lang=en&cc=us

Go to the site above, select your operating system from the dropdown menu and download the driver. Some new Windows operating systems (Vista or 7) don't need downloadable drivers. If that is the case then connecting the printer to the computer via a USB cable should be enough. The Windows Update system will do the rest.

I hope this helps! Good Luck!