Top 10 HP PSC 2410 All-In-One InkJet Printer Questions & Answers

HP PSC 2410 All-In-One InkJet Printer Logo

Question

  • 81,529 People Helped

WHERE COULD I DOWNLOAD THE HP DIRECTOR SOFTWARE

HP Director Software

Where could I download the HP Director Software

Posted by on

Answer

  • Most Helpful of 12 Answers

Try from their official webpage, or use this Driver Update Software for XP Vista 7 8. I hope I have helped. have a nice day
Ryan

Posted on Jan 07, 2015

Question

  • 15,252 People Helped

Error 232 receiving fax

Do you know what error "232" means? I'm not able to receive a fax. Report says "Result" Error 232. I have all in one HP PSC 2000 Series 2410.
I'm able to send faxes


Thank you

Posted by on

Answer

  • Most Helpful of 6 Answers

fax error 232 indicates a communication failure between the sending and receiving units. I'd check for line noise on the phone (you can hear it as cracks and pops) If your fax line is not dedicated, any noise from another phone pickup or an answwering machine can cause the failure.

Posted on Sep 08, 2008

Question

  • 12,340 People Helped

scanning with hp psc 2410 photosmart all in one

i can print whatever i want from any programs, but i cannot scan documents that i want to send via e-mail. Furthermore, when i try pushing the "scanning" button on my 2410 it tells me your scanning options were not defined, install/execute software on your computer. What can i do?

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi flipflop8
intact it is the windows update which has messed up ...
do one thing install the software completely and do not open HP director.
then download the full feature software for a higher version photosmart printer .keep the printer connected and powered on
start the installation for the higher version priner .. when it prompts for installation type chose advanced type then chose custom install. in the next window put a check in the drivers, solution center & photo and imaging device. click next ,it ll prompt u to connect the device . check the box which says connect later and complete the installation.. in this process HP director ll be over written with hp solution center open that from desktop shortcut and scan

to download the software CLICK HERE

Posted on Jun 06, 2008

Question

  • 6,913 People Helped

HP Director software - is it available for download?

Is HP Director software available for download?

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi,

Please click on the web link given below and download the printer software.

Click on the operating system you are using for example : XP or Vista.

Click on download only button and save the file on your desktop.
Please connect the USB cable before installing the printer software.

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&product=303753&lc=en&jumpid=reg_R1002_USEN

Have a great day!

Posted on Mar 28, 2008

Question

  • 3,818 People Helped

Resuming operation after a power failure.

Ever since a recent power failure my HP 2410 has refused to 'come up' powering up the unit results in what sounds like a startup cycle which then continues for several minutes. The power on led continues to flash, hourglass shows in the display and jobs will not print. Needless to say that copier fax and scanner are also nonfunctional. This occured before and HP's tech support via an IM type of interface advised to disconnect the USB cable, disconnect the power supply for a minute, reconnect, repeat 2 times connect the USB cable and reconnect the power supply, this worked in that instance but I have repeated the same proceedure several times with no success. Calls to their tech support people on the 800 number resulted in being told that my printer is out of warantee by less than a year and that I should buy a new printer. Has anybody else had similar problems and what did you do to resolve them Thanks

Posted by on

Answer

  • Most Helpful of 5 Answers

In case of Power Failures / Surges.....we should first check if the h/w of the printer has gone defective... Try the following in the specified order... 1. Unplug the power cable at the back of the printer and replug it and then press the "ON" button on the printer to check if it works else... 2. Unplug the power cable from the surge protector (if you are using one) and replug it and then press "ON" button else just try unplugging from the wall jack and replug the cable (if you are not using a surge). 3. Else , Try a different wall jack 4. You may even try taking the printer to a different room and then check if you get some power. Now if the printer powers up but the "startup cycle" continues...it needs a "semi full reset" to do that-> 5. unplug the power at the back of the printer and 6. press # and "6" at the same time on the front panel 7. while holding these two buttons , replug the power at the back and keep holding till you see "semi full reset" on the screen 8. Now release the buttons and let the reset complete...you may be prompted to enter the language again etc.... Even if this doesnot work...try a "full reset" 9. Which is done by pressing "#" and "9" simultaneously with the same procedure Else the firmware(program inside the printer) has gone bad and may need replacement A good option is to upgrade it by calling the tech support....they do hav an option to exchange your printer with a better model and you will benefit by about 40% over the price of the new printer

Posted on Jan 23, 2007

Question

  • 2,707 People Helped

my printer hp deskjet f2410

my printer hp deskjet f2410 blinking and i cant allign the cartridge, how to reset all cartridge (HP60 black and color) ?

Posted by on

Answer

  • Most Helpful of 1 Answers

Unplug the power cord from the back of the printer while its ON

now Press and Hold

Ok and Cancel button at the same time

While holding them plug in the power cord

Once the printer turns on release the buttons

You will see the Reset message on screen of your printer and in the process it will align the cartridges

Posted on Apr 07, 2011

Question

  • 2,507 People Helped

Message: Remove and check print cartridges

Replaced both color and blak ink and display screen shows check and remove cartridges. Tried unplugging and turning off, but does not help. Computer does not promp to select realignment as manual says.

Posted by on

Answer

  • Most Helpful of 2 Answers

Hi Natalia,

Please click on the web link given below and perform the steps as provided in the web page to fix the issue.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00054461&cc=us&lc=en&dlc=en&product=303753


Perform the steps carefully.
Have a great day!

Posted on Mar 28, 2008

Question

  • 2,437 People Helped

loud clicking noise when turn on printer

when i turn on my printer it goes through the start up checks but then it just starts to make this loud clicking noise and then i have to unplug it for me to get it to stop, because it wont power down

Posted by on

Answer

  • Most Helpful of 2 Answers

I would check wherever possible for foreign objects in the printer. Failing that, a partial reset is available for your PSC 2410:

A partial reset can be done by:

1) Unplugging the power cord (you are already there!)
2) Press and hold the (#) key and (3) key while plugging the unit back in


Posted on Dec 28, 2009

Question

  • 2,343 People Helped

Printer HP PSC 1610 All-in-one Driver

I don't have the DVD driver for printer Printer HP PSC 1610 All-in-one Driver, What can I do?

Posted by on

Answer

  • Most Helpful of 1 Answers

I dont understand about the term DVD driver.

however if you are looking for the printer drivers then following are the link.

for windows xp:

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-30256-1&lc=en&cc=us&lang=en&os=228&product=390315&dlc=en

for windows vista:

http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47767-1&lc=en&cc=us&lang=en&os=2093&product=390315&dlc=en


once you click on any of the above links according to the operating system that you are using, scroll down to step 3 and then click on download only button. once the download is finished, unplug the usb cable from the printer and then run the file.

Posted on Mar 14, 2008

Question

  • 2,165 People Helped

''clicking'' noise started randomly- cant use printer

Today, my printer just randomly started making a "clicking" noise and wouldn't stop. I wasn't even on the computer or using my printer. I had to push the cancel button and shut it down. Once I turned it on and tried to print something, the same thing happened. The screen just has the HP logo on it and I cannot get the printer to copy, scan, or even print anything. Can anyone help me with this? I am not computer or printer savy and cannot figure these things out. Thanks for your help

Posted by on

Answer

  • Most Helpful of 1 Answers

Hi starrz54,

Here is the HP site that talks about resolving unexpected noises (such as clicking)...

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu06191&lc=en&dlc=en&cc=us&lang=en&rule=26695&product=303753

You also might try doing a full reset on the device. Here is how to do that: While switching on the scanner press # and 9 to initialize.
I
This should give you some good directions and if it does not resolve the issue, the next step would be to have it serviced or replaced.

Posted on Nov 16, 2008

747 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PSC 2410 All-In-One InkJet Printer HP

  • PSC 2410 All-In-One InkJet Printer HP

Most Popular Question

could download hp director software

  • Office Equipment & Supplies
Loading...