HP PSC 2410 All-In-One InkJet Printer - Answered Questions & Fixed issues


In case of Power Failures / Surges.....we should first check if the h/w of the printer has gone defective... Try the following in the specified order... 1. Unplug the power cable at the back of the printer and replug it and then press the "ON" button on the printer to check if it works else... 2. Unplug the power cable from the surge protector (if you are using one) and replug it and then press "ON" button else just try unplugging from the wall jack and replug the cable (if you are not using a surge). 3. Else , Try a different wall jack 4. You may even try taking the printer to a different room and then check if you get some power. Now if the printer powers up but the "startup cycle" continues...it needs a "semi full reset" to do that-> 5. unplug the power at the back of the printer and 6. press # and "6" at the same time on the front panel 7. while holding these two buttons , replug the power at the back and keep holding till you see "semi full reset" on the screen 8. Now release the buttons and let the reset complete...you may be prompted to enter the language again etc.... Even if this doesnot work...try a "full reset" 9. Which is done by pressing "#" and "9" simultaneously with the same procedure Else the firmware(program inside the printer) has gone bad and may need replacement A good option is to upgrade it by calling the tech support....they do hav an option to exchange your printer with a better model and you will benefit by about 40% over the price of the new printer

HP PSC 2410... | Answered on Oct 01, 2018 | 3,828 views


Go to an office supply store and pickup printer cleaning sheets. They are sticky on both sides. You run a sheet through it a couple of times to remove paper dust from the rollers. The pickup roller is so slick it is drawing in more that one sheet of paper. Cleaning the rollers and the paper path will solve your problem.

HP PSC 2410... | Answered on Mar 20, 2017 | 133 views


you can do it easily by installing the utilities from the disk.

HP PSC 2410... | Answered on Apr 09, 2016 | 47 views


Check the sensor of end position

HP PSC 2410... | Answered on Mar 05, 2015 | 117 views


Try from their official webpage, or use this Driver Update Software for XP Vista 7 8. I hope I have helped. have a nice day
Ryan

HP PSC 2410... | Answered on Jan 07, 2015 | 81,539 views


1. a group or committee of persons sent to a foreign country toconduct negotiations, establish relations, provide scientific andtechnical assistance, or the like.
2. the business with which such a group is charged.
3. any important task or duty that is assigned, allotted, or self-imposed: Our mission is to find the child a safe home.
4. an important goal or purpose that is accompanied by strongconviction; a calling or vocation: She has finally found her missionin life.
5. a sending or being sent for some duty or purpose.
  • HP PSC 2410... | Answered on May 13, 2014 | 80 views


    Remove and reinstall, If you have a disk use it, if not download from HP site and install newest drivers, if using with Windows 8, some machines will not work... Remember to shut off printer and remove the usb cord if you are wiring direct, do not plug in till it tells you to...

    HP PSC 2410... | Answered on May 02, 2014 | 48 views


    INSTALL ORIGINAL DRIVER

    HP PSC 2410... | Answered on Mar 20, 2014 | 338 views


    What type and size memory card? The PSC1350 won't work with SDHC cards even though they fit into the slot.

    HP PSC 2410... | Answered on Dec 27, 2013 | 84 views


    I have experienced this problem numerous times since owning theprinter, and usually a full reset (# and 9 on power-up) has resolvedit. Not this time, however! Following Guest's advice above, I visitedwww.fixyourownprinter.com and found the solution: cleaning the glass. Thank you, Guest!

    Freddy

    HP PSC 2410... | Answered on Sep 21, 2013 | 1,293 views


    fax error 232 indicates a communication failure between the sending and receiving units. I'd check for line noise on the phone (you can hear it as cracks and pops) If your fax line is not dedicated, any noise from another phone pickup or an answwering machine can cause the failure.

    HP PSC 2410... | Answered on Jun 25, 2013 | 15,262 views


    This has been solved in the fixyourownprinter.com forum. Clean the bottom of the scanner glass. You have to take a bit of it apart but it's not hard with the help of this HP site: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00553775&cc=us&lc=en&dlc=en&product=303753&dlc=en&lang=en

    Good luck.

    HP PSC 2410... | Answered on May 20, 2013 | 1,166 views


    Inkjet printer require both cartridges to be installed and have ink to go online. There is no way to bypass this function. If the printer does not detect the cart when it tries to perform a head clean cycle you get the error you have displayed on the screen. All inkjet printers are like this not just HP.

    HP PSC 2410... | Answered on Apr 11, 2013 | 134 views


    try to reset printer , Press and hold # and 3 while plugging in the power cord. Note: For models that are not fax capable, press Plus (+ ) instead of # .

    HP PSC 2410... | Answered on Mar 24, 2013 | 39 views


    It should work, simply plug your PSC to your PC/Laptop and go to devices and printers, you'll see it there and then you'll see "Needs Troubleshooting. Click on your device with the right button of your mouse, and you'll see at the bottom of the drop down list "Troubleshooting" run it and follow instructions, after that should be working.

    HP PSC 2410... | Answered on Mar 17, 2013 | 30 views


    With your printer in a USB port, type WIAACMGR onto Windows start bar line and hit enter. This will establish connection with your printer for scans - only I cannot yet figure out how to do PDF conversions. Hope this helps.

    HP PSC 2410... | Answered on Mar 04, 2013 | 80 views


    The magenta print head nozzles maybe blocked.
    Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
    If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
    It may be more cost effective to buy a later model and better printer than replace the print head.

    HP PSC 2410... | Answered on Jan 28, 2013 | 89 views


    I have the exact same model of printer, I find that it prints faster if you go into printing preferences and change the print quality to fast draft or fast normal. You can also set the printer directly by pressingcopy twice then press3 for copy quality, then select 3 for fast.
    Doing both should produce faster printing for your documents. (NOTE : This will not suggested if you are printiing items that need to have crisp clean printing as the faster it prints the less detailed the printing is.)

    HP PSC 2410... | Answered on Sep 11, 2012 | 108 views

    Not finding what you are looking for?
    HP PSC 2410 All-In-One InkJet Printer Logo

    747 questions posted

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Ekse

    Level 3 Expert

    13434 Answers

    efs_perpends
    efs_perpends

    Level 3 Expert

    1997 Answers

    Cindy Wells

    Level 3 Expert

    6136 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...