20 Most Recent HP PSC 2410 All-In-One InkJet Printer - Page 8 Questions & Answers


No , there is no fuse in it. These voltages are just the main ones, from the power pack, have you checked the presence of the 5 volts one for the processor? The voltage is obtained from the 16 volts one by using a regulator - it looks like a big,flat transistor. If the voltage is there then the processor has failed and in this case the printer is dead - replacing the mainboard would cost you more than a new one.

HP PSC 2410... | Answered on Dec 01, 2010


If you are using a genuine copy of Windows 7 , then Just click the Windows update Option after connecting to internet ...
Please Rate my answer Fairly and Support me . Thanks and Regards Deepak Richard

HP PSC 2410... | Answered on Dec 01, 2010


HP PSC 2410 PHOTOSMART ALL IN ONE PRINTER PROBLEMS
FOR EVERYONE OUT THERE WHO IS AT YOUR WITS ENDS WITH YOUR HP PRINTER THAT IS TOTALLY ABSOLUTELY STUCK IN STARTUP
AND MAKING THAT AWFUL CLICKING NOISE ---- LET ME TELL YA ---I TRIED EVERYTHING--I MEAN EVERYTHING
I WAS JUST ABOUT TO PULL ALL MY HAIR OUT--- I READ ALL THE POSTS AND DID EVERYTHING RECOMMENDED
FROM POSTS OF OTHER USERS AS WELL AS THE SORRY HP WEBSITE!
I DID NOT WANT TO TAKE APART AND CLEAN GLASS AND STRIPE B/C I WAS AFRAID TO DO THIS, BUT I THOUGHT I AM GOING
TO THROW IT AWAY TODAY ANYWAY AFTER WHAT I HAVE BEEN THRU SO I STARTED TEARING INTO IT AND -- EVENTHOUGH I AM NOW
IN TEARS B/C IT REALLY WORKED---LOL I DIDNT REALLY KNOW WHAT I WAS DOING SO LET ME TELL YOU HOW TO DO IT NOW THAT
I KNOW --LOL LIFT THE LID FOR YOUR SCANNER AND THERE WILL BE TWO SCEWS ON THE LEFT. I USED A TINY ALAN WRENCH
(WORKED GREAT) TAKE THEM OUT AND THEN OVER ON THE PANEL SIDE, TAKE A SCREWDRIVER AND LIFT FROM THE BACK-JUST POP IT OFF.
I DID NOT TAKE ANY OF THE RIBBONS LOOSE. 2 SCEWS WILL BE UNDER THE COVER, REMOVE THEM, ALSO REMOVE THE SCANNER LID BY PULLING
TAB TOWARDS YOU ARE LIFT THE LID STAIGHT UP. I JUST LET EVERYTHING HANG AGAISNT THE WALL WHILE I WAS WORKING. I TOOK THE GLASS
OUT AND USED MY SPECIAL LIL CLOTH THAT CAME WITH MY FLAT SCEEN TV AND CLEANED THE GLASS REALLY WELL, PAYING VERY CLOSE ATTENTION
TO THE BLACK/WHITE AND MIRRORED STRIP. (MAKE SURE THE BLACK/WHITE STRIP IS DOWN PUT IT ALL BACK TOGETHER ) I DIDNT EXPECT IT TO WORK
BUT IT DID!!!!!!!!!!!!!!!!!! I KNOW THIS IS LONG BUT GOSH I HOPE IT HELPS EVERYONE!! TAKE CARE ALL, KATHY

HP PSC 2410... | Answered on Dec 01, 2010


check the cartridge holders !

HP PSC 2410... | Answered on Nov 30, 2010


Try using the HP Scan Diagnostic Utility in Windows - HP Customer Care (United States - English).





If you need more help come back.Post / thumbs / testimonial are welcome!

HP PSC 2410... | Answered on Nov 27, 2010


Try using the HP Scan Diagnostic Utility in Windows - HP Customer Care (United States - English)


If you need more help come back.Post / thumbs / testimonial are welcome!

HP PSC 2410... | Answered on Nov 27, 2010


What kind of printer. Ihat happens after those lights go off is ther ea message or blink pattern?

HP PSC 2410... | Answered on Nov 18, 2010


Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English).


If you need more help come back.Post / thumbs / testimonial are welcome!

HP PSC 2410... | Answered on Nov 16, 2010


First Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English).

Then If you need more help come back.Post / thumbs / testimonial are welcome!

HP PSC 2410... | Answered on Nov 16, 2010


you might have to unstall then reinstall it
control panel add and remove programs select the printer to uninstall or the printer might have its own uninstaller click start all programs navigate to the printer and see if it has its own uninstaller
or you might have to install drivers
control panel admistrive tools,computer management,device manager scroll down you could see a yellow question mark? right click to reinstall drivers or ports(com&lpt)+ to expand then you will see communications port or ECP printer port right click update driver
hope this helps

HP PSC 2410... | Answered on Nov 15, 2010


go here and select your operating system (Windows version) and then you can download all the drivers and software you need to scan and print

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=uk&product=303753&lang=en&

HP PSC 2410... | Answered on Nov 10, 2010


I too have this problem and I have found how to correct it. It worked for me and hopfully it will work for you and others. Turn off your printer. Open the scanner cover. Turn your computer back on. That is what I did and it fixed it for me for now. Please send me an E-Mail if it fixed it for you. I have a sneaky suspecion that it just started working again and me opening the scanner cover was not the fix. Thanks, Wayne

HP PSC 2410... | Answered on Nov 08, 2010


Please reinstall his driver again.

HP PSC 2410... | Answered on Nov 07, 2010

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

747 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6135 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

could download hp director software

  • Office Equipment & Supplies
Loading...