20 Most Recent HP PSC 2410 All-In-One InkJet Printer - Page 4 Questions & Answers


It has something to do with the power supply.
1. Remove the printer from any UPS supplies, additional power supplies, or power strips.
2. Plug the printer into a wall outlet and see if this resolves the problem. 3. If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used. 4. The line voltage and current source at the printer location might need to be inspected to ensure that it meets the printer's electrical specifications.

HP PSC 2410... | Answered on Oct 13, 2011


Ensure that original CD must, Switch off the printer uninstall the printer software, run thy CD when it checking for the printer switch on the machine finish it up, then check...

HP PSC 2410... | Answered on Sep 08, 2011


sounds like your print head needs cleaning
make sure you have ink in the cartridges

open up your printer properties and look for a maintenance section and choose head cleaning
print a test page to comfirm that the head is clean
some printers need a deep cleaning
when the test page comes out without any imperfections, it should print fine.

HP PSC 2410... | Answered on Aug 22, 2011


Hello.

First, remove the existing installation. Go to Printers and Faxes and remove the HP PSC 2410 printer.

Disconnect the USB cable.

Restart your computer.

Reconnect the USB to your computer.

Your computer should see your printer. Install the printer driver.

If you are still getting an error, you will need to repair MDAC 2.8. Here's how:

http://www.macropool.com/en/download/mdac_xp_sp2.html


Hope this helps.

HP PSC 2410... | Answered on Aug 09, 2011


try uninstalling the driver then reinstall again then check if it work

HP PSC 2410... | Answered on Aug 09, 2011


Sometimesyou will have an error message on your HP printer, which means that you willhave to correct the error before continuing to print. If you see a messagesaying that you have an incorrect ink cartridge, or you are told to remove thecolor cartridge, you should follow these steps to correct the problem if youare sure you have installed the correct color ink cartridge. Follow these steps: 1. Cleanthe cartridge contacts: a) Turn on the printer and openthe cover where the ink cartridge is located. Remove the cartridge. b) Remove the cartridge and use aclean, lint-free, dry cloth to gently wipe the contacts. c) Wipe from the top of the contact to the bottom. Do this foreach contact. d) Place the HP ink cartridge back in the carriage. Turn theprinter off for a minute. e) Turn the HP printer on. Use the printer to print a testpage. If this does not correct the problem, move onto option (c). 2. Nowreinstall the ink cartridge and turn the printer off for a minute. You may need to reset your HP PSCall-in-one printer after completing above process. For that follow these: a) Turn on the Office jet or PSCall-in-one printers. b) Unplug the power cord from theback of the printer and wait one minute. c) Plug the power cord back into theprinter. Press the On button and hold until printer turns on. d) Print a test page to see if this hasfixed the problem. If not, you will need to buy a new color ink unit. Hope this will help you. Good Luck.

HP PSC 2410... | Answered on Aug 09, 2011


Perform a semi-full reset on your PSC 2410 by holding the button combination given below, while plugging in the power cord.
Press and hold # and 6 on the front panel keypad, while plugging in the power cord.

If we are talking about the cartridge jamming then

http://www.fixyourownprinter.com/forums/inkjet/30434

HP PSC 2410... | Answered on Aug 07, 2011


Go to the following link and download the manual
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=303753
and for the driver go to this link
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=303753
After downloading you can save the same on your computer and refer to it whenever required.
You can also sort your problems by going to support section HP printers site.

HP PSC 2410... | Answered on Aug 07, 2011


Well, either the 4GB card contacts are grotty, or the HP PSC 2410 doesn't like your SDHC card somehow; though SDHC cards are supposed to be able to ratchet down to SD for compatibility and a driver update could possibly fix this, it hasn't yet. Use a card that isn't SDHC; this probably limits you to 2GB or 4GB (see the readme in the HP print driver setup package you use.)

HP PSC 2410... | Answered on Aug 06, 2011


Go into your control panel, and in add/remove software, or under programs & features, look for HP's Smart Web Printing. Uninstall it.
That's it, should FixYa right up!

HP PSC 2410... | Answered on Jul 24, 2011


You can download it from the HP Official Download Site, please click this LINK, select your Operating System and click "Next", and then click "Driver - Product Installation Software", read the description of the blue links (if there is more than two links) and click one of the blue links to download the available/suitable driver. On the next page, follow the onscreen instructions to download your driver/software. If you need further help, let me know with the name of the operating system installed on your computer.
Good Luck.
Thanks for using FixYa.

HP PSC 2410... | Answered on Jul 22, 2011

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

747 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6135 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

could download hp director software

  • Office Equipment & Supplies
Loading...