HP PhotoSmart 7350 InkJet Printer - Answered Questions & Fixed issues
Prints test page ok but not anything else
Hi Rick ,did the cartridges alline after you put them in ? I know the test was ok , so lets go into your printer software and check under settings to see if the printer needs to be told it has new cartridges , write me back and let me know if this works , if not , i will readvise ..........................Good luck Roy
Ink cartridge leaked inside HP photosmart 7350.
Lots of Q-tips! I'd also use some small pieces of cotton cloth--be careful it doesn't leave strands of cloth in the bottom of the printer. I've had this happen and I just stuck with it until it got reasonably clean.Oh--and warm water will work just fine. Most of the ink is water-soluble
Hello
The Canon SD1000 will work with SDHC cards, up to 32GB in size. Stick with any of the major brands and you won't have problems.
The HP 7350 will NOT work with SDHC cards, limited to SD cards 2GB and smaller.
Not drivers
pls. visit this site so you would be able to download the driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=72886&cc=us&lc=en&dlc=en&product=72886&tmp_track_link=ot_search
Hope this helps and pls. rate this solution thanks
Printer has started to print
You might have to uninstall the printer restart your computer then reinstall your printer
click start control panel administrive tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port you might see a yellow?question mark this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options plus you can troubleshoot
scroll to the bottom toolbar (bottom of screen) right click you can select task manager applications also processes you will see whats running on your computer you might have a virus also select users you will see who is using your computer
hope this helps
Printer says both print cartridges should be
The printer is reset and has some conflicts with the PC. So remove printer and reinstall afterr uninstalling the driver software first.
After which you can connect the printer to be detected and installed.
Now make sure before this that the roller and mechanical movements are correct.
Take a test print. If not check on the mechanism for errors.
How to install printer without cd to computer
mcdevito75 here, You may or may not need the CD to install your printer. I would try in search from your home page the exact name of the printer and istall, you just may get the instalation instructions online or the ability to buy ther install CD. In either case there will most likely be a charge, but you"ll just have to see during your search.
Photos
Well, go to your local Ink Link franchise and ask them to clean the print heads on your cartridges, that should solve your problem. They should have the proper tools for that and you won't be wasting any more ink on software cleaning.
Not finding what you are looking for?