20 Most Recent HP LaserJet 1320n Printer Questions & Answers


Density Adjustment in HP Laserjet 1320

Firstly I doubt that economode is set by default, but maybe the printer is in economode for some reason. Secondly I would normally expect the problem to be the toner cartridge but assuming you have checked this my suggestions are as follows. 1. Run two internal prints from the printer. a. By pressing the green "go" button briefly. b. By holding the green "go" button for 5 seconds. The first print should give you an indication of the print quality, if it is good then the printer itself is probably behaving normally. The second print will tell you exactly how the printer is set up. This includes whether economode is on or off and what print density it is set for (default is 3, range is 1-5). 2. If economode is on or the print density is lower than 3 the easiest way to fix this is to do a cold reset on the printer as follows. Important note: This will reset the printer to factory defaults, the only setting that is critical is the jetdirect setting. Since you stated that your printer is a 1320 and that you are running DOS I am assuming that it does not have an "n" (for network) suffix eg 1320n. If I am right in this assumption you can ignore the jetdirect comments above, if it is a network printer the second printout from 1a should provide the jetdirect information which you may need to keep for future reference. Cold Reset Procedure:- a. Turn the printer power off b. Press and "hold" the green "go" button whilst turning the printer on. c. Continue to hold the go button for at least 5 seconds and until the amber attention light turns on (triangle with ! in the middle), this should occur before 15 seconds elapses. d. Release the go button. Factory defaults should now be reset and you can check using 1a whether any changes occurred.
7/26/2021 7:06:02 AM • HP LaserJet... • Answered on Jul 26, 2021

Density adjustment

isbcomputer.com is a dedicated online store offers Printer Spare Parts, Formatter Card, Main Board, Power Supply Board, Flat Cables, Fuser Pressure Roller, Gear, Sensor, Scanner Units, HDD Parts, HDD PCB, Hard Disc Drive Spare Parts, Data Recovery, Refilling Products, Jet Image, Toner Powder, Toner Drum, Toner Cartridges, Laptop Accessories, Power Adapters, Computer Accessories, Computer Services, Computer Peripherals and many more Computer and Printer related products at one place with best prices. Visit - http://isbcomputer.com
2/2/2017 9:22:44 AM • HP LaserJet... • Answered on Feb 02, 2017

Error 0x80070057

problem your os please
9/9/2016 9:35:05 AM • HP LaserJet... • Answered on Sep 09, 2016

Mirror printing on hp 1320

you need post script level 3 support printer.You should buy hp laserjet 2200 or 2300 or 4250 it has default post script driver
9/9/2016 9:29:27 AM • HP LaserJet... • Answered on Sep 09, 2016

Printing problem "PCL XL error"

Dear Sir

My printer is laserjet 1320

PCL XL error
Subsystem: KERNEL
Error: Illegal Tag
Operator: 0x1b
Position: 6

Pls. This problem solution give me.
6/24/2016 3:39:13 PM • HP LaserJet... • Answered on Jun 24, 2016

Does not pick page from tray

Clean the pickup roller and separation pad. Pages 52-63 of the manual at the link below http://www.partsnow.com/docs/service-manuals/HP%20LaserJet%201160%201320%20Service%20Manual.pdf
10/13/2015 4:56:30 PM • HP LaserJet... • Answered on Oct 13, 2015

Win8.1 pro 64bit printer drivers

down load the drivers for the printer from the net type in driver down load for the make and model of the machine then down load from the correct page
9/16/2015 10:24:41 AM • HP LaserJet... • Answered on Sep 16, 2015

Pcl xl error, subsystem: kernel,error:illegal tag,operator: ox8, position; 918

reinstall driver
12/29/2013 2:20:55 AM • HP LaserJet... • Answered on Dec 29, 2013

Is there a counter for pages printed on my 1320n

No, the page count is not on the test page. You need the configuration page. Press the GO button and hold for 5 seconds. The yellow light will come on and you can release.
11/9/2013 12:03:54 PM • HP LaserJet... • Answered on Nov 09, 2013

I have problompeper is stuck up side pls solve my prolom your problem for a solution...

hmm i believe you might have a hardware problem. can you explain the problem more in details like your paper get stuck from the feeding place below or before getting out. this kind mostlt called paper jam or stuck
10/20/2013 9:54:17 AM • HP LaserJet... • Answered on Oct 20, 2013

Pcl xl error,subsystem:kernel,error:illegal tag,Oprator:0x1,pos:7

pcl xl error subsystem: kernel error : i llegaltagoperator : 0x2position : 54
10/15/2013 12:09:29 PM • HP LaserJet... • Answered on Oct 15, 2013

I want the printer to print only one side it automatically prints two sides

Try looking in the driver properties for that printer. You should be able to turn on/off the duplex feature. Also try the "Paper Handling" area in the printer's menu.
8/3/2012 10:01:05 PM • HP LaserJet... • Answered on Aug 03, 2012
Not finding what you are looking for?
HP LaserJet 1320n Printer Logo

Popular Tags

129 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4362 Answers

Ben Johnson

Level 3 Expert

686 Answers

Cindy Wells

Level 3 Expert

6649 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

printer jammed beginning feed

  • Office Equipment & Supplies