20 Most Recent HP DeskJet 6122 InkJet Printer - Page 2 Questions & Answers

Put back the old cartridges try if print sucsess swap the cartridges find which was faulty.

Go to start->control panel->printer->right click on the default printer(your mut be deskjet 6122)->go to properties..there you will see print test page

Thanks

Power the printer off. If you are unsure how to clear your printer queue restart the computer.

Hi there.

Take out all the cartridge and clean the gold contacts with a soft and clean cloth. Then put the cartridge back, give it a little wiggle, making sure that the cartridges are seated properly.

On your printer software, look for the Maintenance mode or tab. Do a print head cleaning. If problem persists, manually clean the print head.


Let me know if you need further assistance.

Thank you!

for print jobs stuck in the print queue,open link below or copy and paste in your browser's main address bar http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&cc=us&lc=en&dlc=en&product=83027&tmp_track_link=ot_search#N107

Eiter your color ink cartridge is low or the nozzel end of the cartridge has a clog. The clog can be cleared by wiping gently with a lint free cloth dampened with warm water.

in office adjust the page settngs from here file - page setup and make it default

best regards

Hi,
Which program are you using? Check margins Check paper size
Regards,

Left the top lid if you cant get it out that way a lot of these hp printer have door in the back look and see if your printer has it if does just open that back door and take out the paper.

sounds frustrating

best of luck

hi

If You need to clean the printhead

check here how

http://www.youtube.com/watch?v=ZAwYIbjswV0

Make sure the printer paper feed is not blocked with any paper. then check that the rollers are clean.


Also you need to make sure that the paper feed has the correct size settings (Usually a slide across guide labeled from a5-a4/letter)

This might be a problem with the connection or corrupted file, try to cancel the print job and try again. -if your using USB connection try to unplug and replug the cable from the PC and the printer side.

FixingBlinking Lights on a 6000 Series Printer ..check here .