HP ScanJet Office Equipment &... • Uploaded on Oct 20, 2013
The TMA includes a light source, a positioning plate, and media holders that are placed directly on the top of the scanner glass. Make sure you have all the components of the TMA.
TMA components
1- Negative light shield
2- Negative holder
3- Positioning plate
4- Slide light shield
5- Light source and slide holder
To connect the TMA cable to its port on the scanner
1 Disconnect the power cable from the scanner.
2 On the back of the scanner, find the round TMA port.
3 Holding the TMA cable by its free end, align the connector so that the
arrow is on the top side.
4 Gently insert the connector into the TMA port.
Caution! Do not force the cable into the TMA port. Forcing the
cable can bend or break internal pins.
5 Reconnect the power cable.
To scan standard 35 mm slides or negatives, use the TMA light source and the positioning plate. For negatives, you need the negative holder. When scanning fewer than three slides, you will need the slide light shield; when scanning fewer than four negative frames, you will need the negative light shield.
Please click the manual here.
Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b
32 questions posted
Usually answered in minutes!
244 Questions
109 Questions
80 Questions
73 Questions
80 Questions