20 Most Recent HP Pavilion a705w PC Desktop Questions & Answers


What is exactly the problem, Does your computer have the software and the CD burner in it? What are the steps you follow to burn music?
Normally to burn the music from the computer , use Media player or any other software that can burn CD. Pick the music files to be burned from the local drive. Insert blank CD in the CD burner. Hit the burn to CD button from the CD burning software.

HP Pavilion... | Answered on Mar 25, 2020


Hi,

If you're looking to download music,

http://www.limewire.com/ will get you where you gotta go.

Download the program, run it, and search for whatever you want. Be wary of files with strange names for they can be dangerous.

Good Luck :)

HP Pavilion... | Answered on Feb 20, 2020


Dear Anonymous,
http://h10032.www1.hp.com/ctg/Manual/c00225826.pdf pages 11->19 show detailed instructions on removing/replacing the HDD on this model computer. N.B.: Make sure the jumper link on the socket end of the new HDD is in the same/equivalent position as the old HDD. (If in doubt "C.S." or "Cable Select" is always a safe position.) Kind regards - 'b'ye, Bruce Gilbert.

HP Pavilion... | Answered on Jul 31, 2014


Most card readers are plugged into a usb header on the main board.

HP Pavilion... | Answered on May 04, 2014


Try booting with a Linux disk and see if sound works. If so you most likely have a driver issue.

HP Pavilion... | Answered on May 04, 2014


short the wires and put them back

HP Pavilion... | Answered on Apr 01, 2014


You should check in Device Manager to see if your audio driver is installed and working properly. If not, reload it. You could also check in the BIOS setup to see if the onboard audio has been disabled. There is also a possibility that the onboard audio has failed. You can order a sound board to install in the nachine to restore audio capability. Just disable the onboard audio in the BIOS, install the card and load the drivers supplied with the card. Hook your speaker to the jacks on the new card and you're back in action.

HP Pavilion... | Answered on Dec 07, 2013


You need to find the Mother Board diagram or manual, that will tell you were the pins are to plug it back in.

Contact HP here is your motherboard: Giovani-GL6, Giovani2-GL6

HP Pavilion... | Answered on Oct 26, 2013


Need to call your Internet provider

HP Pavilion... | Answered on Sep 04, 2013


do you motherboard i don't think you can.oem-pruduct.

HP Pavilion... | Answered on Apr 04, 2013


Windows was writing to a file when the power went off. Now windows files are damaged. I'm assuming you have Windows XP on the machine. Do you have your Windows XP cd?

HP Pavilion... | Answered on Mar 16, 2013


You might have some viruses and malware......

Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". Now get some or ALL of the FREE programs below.

Download, Install and Run Malwarebytes Anti-Malware:
http://majorgeeks.com/download.php?det=5756
When Installing choose the non-pro version.

Download, Unzip, Install and Run TDSSKiller:
http://majorgeeks.com/Kaspersky_TDSSKiller_d6895.html

Download, Install and Run Super Anti-Spyware:
http://majorgeeks.com/SUPERAntiSpyware_d5116.html

If you have an outdated Anti-virus program then Download, Install and Run Avira Anti-Virus:
http://majorgeeks.com/Avira_AntiVir_Personal_-_FREE_Antivirus_d955.html
Make sure to select ALL of the "threat categories" when you install or configure Avira...

You should be in pretty good shape if you run and install all of these programs.

HP Pavilion... | Answered on Jun 29, 2012


Basically, the HPSU-0004 Error states that one or more DLLs (libraries) needed for the Update utility to run are missing.

The libraries were deleted, or pointers to irrelevant libraries were left in the Registry.

2 Possible Solutions:

The EASY solution:

1. Remove all of your HP (Hewlett Packard) Printer software from your computer and do a fresh install from the CD that came with your printer.



The Hard Solution (only do this if the easy one doesn't work):

1. Download a current version of the FULL drivers+applications (single HUGE file) for your printer;

2. Start running the file downloaded in the previous step, until it offers the option to install the software (other options might be there, such as "read the Readme file");

3. Do NOT click on "Install", but rather simply exit the Installer (cancel, exit, ...) - the reason for step 2. above was to just have the downloaded file extract in an orderly manner all the files that it (and YOU) would use for its (and YOUR) further processings;

4. Locate on on your drive the installation folder created in step 2., and -- under it - the folder "setup\hpupdate" (the whole thing should be located somewhere under the TMP or TEMP folder - just run a Search/Find for it, using your search engine of choice);

5. IF (and only if) you have located the HPUPDATE folder in the previous step (you will, normally), continue:

6. Under Windows Control Panel, start the "Add/Remove Programs" applet, and -- in the list of applications it presents -- look for "HP Update";

7. Remove the HP Update application as you would any other application (the uninstall process might end with some errors for files not found - this is normal in this case, as we already know that some files are either missing, or mistakenly pointed at, as stated earlier in this text);

8. Now go to the setup\hpupdate folder located in step 5. above, and run (double-click on) the only *.msi fie found within it (this will reinstall the version downloaded of the HP Update utility);

9. When Installation (previous step) is completed, run the newly installed HP-Update utility, to find further updates both for itself (you might not have had the most recent version) and for any other HP application that might reside on your drives.

10. This completes the process

Good Luck!

HP Pavilion... | Answered on May 17, 2012


Unplug your device from any power source or devices. Open it up and locate the hard drive, which is usually located near the CD drive(s). Unplug all the cables from it, and unscrew any screws you find on it. Then, do whatever you need to do with the drive (I recommend taking it to a professional).

If you don't feel comfortable opening up the tower, take the whole thing to somebody who would know what they're doing.

HP Pavilion... | Answered on Apr 22, 2012


Your system is failing the POST, I think. You'll need to troubleshoot it by opening the case and unplugging everything but the CPU and memory and video. Now power it on. If there still is a problem, try removing one of the sticks of memory.
Once you isolate the problem, you can replace the part that has gone bad.

HP Pavilion... | Answered on Feb 17, 2012


start ,control panel, add and remove programs find the advertisement program uninstall it.

HP Pavilion... | Answered on Feb 11, 2012


The blinking button is an error code. You need to call HP and they will help you determine what the code means and how to fix the problem.

HP Pavilion... | Answered on Jan 16, 2012

Not finding what you are looking for?
HP Pavilion a705w PC Desktop Logo

194 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Ekse

Level 3 Expert

13434 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pavilion HP

  • Pavilion HP

Most Popular Question

application hpsu 0004 missing from

  • Computers & Internet
Loading...