20 Most Recent Camco Copper And Zinc Standard Hwd Water Heater Screw-in Fold Back Element - Page 3 Questions & Answers

It's probably the outlet then. It should be 220v with a 13a fuse. Maybe the fuse is blown, breaker tripped?

Contact Atwood to determine the correct setting.

here mate try this it worked for me.

Press left key

Scroll till page 15

Code will say 000 - should be 1000

Press right key once change first digit to 1

Press right key again

Will be on C1 in top right hand corner

Scroll through C pages till A1

Two A1 pages looking for one that says de..utch

Click right key once and change to d.. English

check pressure switch also try turning only hot water on

DOWNLOAD LINKhttp://www.dl4all.com/aka/tag/osaka+gas+fan+heater+user+manual.htmlORhttp://www.osakagas.co.jp/indexe.html

Jennifer, the instructions posted by Rheems on the heater are wrong. You must first rotate the dial clockwise, use force (in our our case) to get the pilot to its position. The folks at Rheems are nuts not to check their instructions before printing them and plastering them on their hot water tanks. Disgraceful, period.

if leaking from tank, replace it. If leaking around fittings have them repaired. Personally since it is a small unit I would replace it and not look back.

follow the gas line into unit remove front panel or panel closest look for small silver tube going to burner should be close to it

On my NPE-210S you need to switch dipswitch #4 to the "on" position, or up on mine. Dip switches are found behind the main panel on the control board. you'll have to also open up the plastic case housing the control board. 4 screws for the main panel and 4 screws for the control board housing.

If you are watching the 1950s version of Quatermass and the pit, the triffid is just about to leave the pit. No idea what you are refering to as you do not mention a make or model. Please try again with the relevant information.

Google it as one word its on there .

did water stop if not problem can be with install --or faulty valve https://www.reddit.com/r/Plumbing/comments/lzde4a/rheem_marathon_install_vacuum_relief_valve/

All things are fixable Mary. I can't find much details on this heater. It appears to be available only in New Zealand and the Far East. We are in North America. Look locally for a service centre and have it looked at. Because it is gas, it has to be fixed by a registered gas technician. https://www.google.com/search?q=paloma+wallman+cute+18+water+heater ..

Just order them by length or take one down to Home Depot. https://www.google.com/search?q=halogen+heater+ES126%2C+replacement+element ..

If the thermocouple is not holding then it must be the power unit on the gas valve not holding and shutting off .

It is That long you may have a pressure problem with the reg . or the injector in the pliot assembly has gone .

Yes they are.

WaterWeld Epoxy Putty ' J-B Weld

https://www.jbweld.com > product > waterweld-epoxy-... WaterWeld™ will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, ... US$7.99 · ‎In stock https://www.homedepot.com/p/Amtrol-BoilerMate-41-Gal-Indirect-Fired-Water-Heater-CH41Z/205193077

The Service Stop Washer Kit and the o-ring with normally fix drips.. https://www.guillens.com/GRO/34436.htm ..

Did you double check the breaker?