20 Most Recent Whirlpool Whirpool 4.8cu ft Electric Range w/ Black - Page 2 Questions & Answers

and the problem is? please post afresh with full details

Sometimes after a power failure the p c board needs re setting. Turn off the power for a few minutes that allows it time to re set. Turn it back on then individually turn on each element for a couple of minutes.

Hi, Recheck the wiring to that switch you replaced, the light circuit was wired wrong, some switch have moved terminals on them so recheck them all. Good Luck I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Lift the top of your stove, then look for a connector or plug, wire that has pushed up near or against the stove top. Where the wires connect to the burners one or more may be loose an needs tightening.

power off to the stove at the electrical switchboard.wait a minute then power on again, set clock again, any better?if not, call the repair man.

We discovered if you press in both the oven control knob and the temperature control knob simultaneously for several seconds, the stop message goes away and the oven returns to normal.