20 Most Recent
Panasonic Panafax UF-9000 All-In-One Laser Printer - Page 2 Questions & Answers
I'm getting the error code e01-31
try checking the scanner cable . look through the glass back right . you will see a usb cable.. check both ends.. if there connected properly and you still get the error.. you need to replace the whole scanner unit
10/23/2009 5:59:45 PM •
Panasonic...
•
Answered
on Oct 23, 2009
Uf-9000 Memory not printing
it seems to be locked up, just turn the power off then on .. you wont lose your docs and you should be working
10/23/2009 5:57:26 PM •
Panasonic...
•
Answered
on Oct 23, 2009
Error Message Reads: Check Scanner Unit E01-31
try checking the scanner cable . look through the glass back right . you will see a usb cable.. check both ends.. if there connected properly and you still get the error.. you need to replace the whole scanner unit
10/23/2009 5:50:33 PM •
Panasonic...
•
Answered
on Oct 23, 2009
Resetting the key operator password
You must return the fax to factory defaults.
press
Function
7
monitor key slowly 4 times
* (asterisk key)
6
scroll down to SHIPMENT SET
set
2
set
wait for machine to reboot
7/28/2009 1:55:32 AM •
Panasonic...
•
Answered
on Jul 28, 2009
How do you set the IP address for network use?
Go to Start>> Control Panel>> Network Connections>>
Right click your Local Area Connection and select Properties. Scroll
the list for the entry titled: Internet Protocol (TCP/IP). Click the
entry and select Properties. Under the General tab, tick the box
titled: Use the following IP address. Enter the IP address and Subnet
mask that you would like to use. eg - IP address = 192.198.0.1 & Subnet mask = 255.255.255.0.
6/24/2009 1:46:11 PM •
Panasonic...
•
Answered
on Jun 24, 2009
Codes mean?
We have exactly the same problem, no manuals, no explanations of all codes.
Thank you!
5/8/2009 8:06:55 PM •
Panasonic...
•
Answered
on May 08, 2009
What does mean communication code error 634
The solution to the problem is as fallow
Press the button: Function
Scroll the menue of function from 1 to 9
Choose the function (F9) Edit File Mode
Press: Function (F9) Presst (Set) then choose from the directory: (1) Filie List
(2) Chage Time /stn
(3) Delete File (Please Choose (3)
by pressing (Set) let it ring then Press (1)
to stop and then press (2) to delete.
(4) Print File
(5) Add Document
(6) Retry Income. File
By choosing this function you will resolve the problem.
please do accept the solution.keep upodated.thank you for using fixya.
4/28/2009 8:06:38 AM •
Panasonic...
•
Answered
on Apr 28, 2009
Communication code 404
it is on the receivers end, saying either the modem is defective or they diconnected the line during transmission
12/16/2008 6:10:57 PM •
Panasonic...
•
Answered
on Dec 16, 2008
Has an E04-01 on the display printer error
This error is to do with the fuser warm up temperature. I would recommend replacing the fuser. I don't know how technical you are, but it is quite a job to replace (the copy module has to be removed as well as all the covers). Hope this helps.
11/27/2008 9:01:44 AM •
Panasonic...
•
Answered
on Nov 27, 2008
Not finding what you are looking for?