20 Most Recent Whirlpool Stove / Oven / Range Cooktop - 5706X570-88 Questions & Answers

I have a whirlpool flat top stove on the big front burner switch what colors go we're like the h1 h2 and the rest that hooks up

It sounds like either a floating neuterial or one of the switches has failed.

You don\'t need to remove the top. The thermostat is the long skinny tube in the oven that comes up to the railcock behind the oven control knob, remove the front panel to get the railcock/thermostat out which has the tube attached to it.

Remove the front panel to find where the gas injectors enter the burner tubes you will see they are cut away and have a screw holding an outer ring which is adjustable, open them up more to get more air in .

Here is a disassembly video. A loose knob problem can be tackled by pulling off the knob, encircling the cracked plastic with a zip tie (after putting Loctite glue in the cracks), pulling the zip tight. Don't lose the sleeve when you pull off the knob. But if this is not working for your setup, here is the disassembly, not your model but maybe useful: https://www.google.com/search?q=whirlpool+gas+top+disassembly

GET IT REPLACED .BY A PRO.

https://cooktophunter.com/common-troubleshooting-solutions-for-induction-cooktops/

Cleaning or replacing the grease filters in downdraft vent hood

Can you get to the switch terminals and try jumping them out with a piece of insulated wire? That would tell you if the switch is defective (my suspicion). Please be careful not to touch any live terminals - only the wire insulation you use for the jumper.